Download or read book Mechanics of Hysteretic Adhesive Elastic Mechanical Contact Between Rough Surfaces written by Haneesh Kesari and published by Stanford University. This book was released on 2011 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In experiments that involve contact with adhesion between two surfaces, as found in atomic force microscopy or nanoindentation, two distinct contact force (P ) vs. indentation-depth (h) curves are often measured depending on whether the indenter moves towards or away from the sample. The origin of this hysteresis is not well understood and is often attributed to moisture, plasticity or viscoelasticity. We present experiments, atomistic simulations and continuum mechanics models that will show that hysteresis can exist without these effects, and that its magnitude depends on surface roughness. We explain the observed hysteresis as the result of a series of surface instabilities, where the contact area grows or recedes by a finite amount. We also demonstrate that when this is the case material properties can be estimated uniquely from contact experiments even when the measured P -h curves are not unique. The hysteresis energy loss during contact is also a measure of the adhesive toughness of the contact interface. We show experimentally that roughness can both increase and decrease the adhesive toughness of the contact interface. We show through numerical simulation of continuum adhesive contact models that the contact interface is optimally tough at conditions at which the contact region is at the cusp of the transition through which it turns form being mostly simply connected to being predominantly multiply connected.
Download or read book Friction and Wear From Elementary Mechanisms to Macroscopic Behavior written by Valentin L. Popov and published by Frontiers Media SA. This book was released on 2019-08-21 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and the interaction of surfaces can usually be felt at the scale of the contacting bodies. Indeed, phenomena such as the frictional resistance or the occurrence of wear can be observable with plain eye, but to characterize them and in order to make a prediction, a more detailed understanding at smaller scales is often required. These can include individual roughness peaks or single molecule interactions. In this Research Topic, we have gathered a collection of articles representing the state of the art in tribology’s endeavor to bridge the gap between nano scale elementary research and the macroscopic behavior of contacting bodies. These articles showcase the breadth of questions related to the interaction of micro and macro scale and give examples of successful transfer of insights from one to the other. We are delighted to present this Research Topic to the reader with the hope that it will further inspire and stimulate research in the field.
Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Contact Mechanics written by Valentin L. Popov and published by Springer. This book was released on 2019-04-26 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.
Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford Graduate Texts. This book was released on 2019 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book explains how these tribological phenomena originate from atomistic and microscale physical phenomena and shows how this understanding can be used to solve macroscale tribology problems.
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2004-01-19 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
Download or read book Proceedings of ITS IFToMM 2024 written by Enrico Ciulli and published by Springer Nature. This book was released on with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Particle Flow written by Jeffery S. Marshall and published by Cambridge University Press. This book was released on 2014-03-31 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is targeted at professionals and graduate students working in disciplines where flow of adhesive particles plays a significant role.
Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational
Download or read book Computational Contact Mechanics written by Alexander Konyukhov and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a systematical analysis of geometrical situations leading to contact pairs -- point-to-surface, surface-to-surface, point-to-curve, curve-to-curve and curve-to-surface. Each contact pair is inherited with a special coordinate system based on its geometrical properties such as a Gaussian surface coordinate system or a Serret-Frenet curve coordinate system. The formulation in a covariant form allows in a straightforward fashion to consider various constitutive relations for a certain pair such as anisotropy for both frictional and structural parts. Then standard methods well known in computational contact mechanics such as penalty, Lagrange multiplier methods, combination of both and others are formulated in these coordinate systems. Such formulations require then the powerful apparatus of differential geometry of surfaces and curves as well as of convex analysis. The final goals of such transformations are then ready-for-implementation numerical algorithms within the finite element method including any arbitrary discretization techniques such as high order and isogeometric finite elements, which are most convenient for the considered geometrical situation. The book proposes a consistent study of geometry and kinematics, variational formulations, constitutive relations for surfaces and discretization techniques for all considered geometrical pairs and contains the associated numerical analysis as well as some new analytical results in contact mechanics.
Download or read book Handbook of Micro Nano Tribology written by Bharat Bushan and published by CRC Press. This book was released on 2020-10-28 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices
Download or read book Multiscale Biomechanics and Tribology of Inorganic and Organic Systems written by Georg-Peter Ostermeyer and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gathers authoritative contributions concerning multiscale problems in biomechanics, geomechanics, materials science and tribology. It is written in memory of Sergey Grigorievich Psakhie to feature various aspects of his multifaceted research interests, ranging from theoretical physics, computer modeling of materials and material characterization at the atomic scale, to applications in space industry, medicine and geotectonics, and including organizational, psychological and philosophical aspects of scientific research and teaching as well. This book covers new advances relating to orthopedic implants, concerning the physiological, tribological and materials aspects of their behavior; medical and geological applications of permeable fluid-saturated materials; earthquake dynamics together with aspects relating to their managed and gentle release; lubrication, wear and material transfer in natural and artificial joints; material research in manufacturing processes; hard-soft matter interaction, including adhesive and capillary effects; using nanostructures for influencing living cells and for cancer treatment; manufacturing of surfaces with desired properties; self-organization of hierarchical structures during plastic deformation and thermal treatment; mechanics of composites and coatings; and many more. Covering established knowledge as well as new models and methods, this book provides readers with a comprehensive overview of the field, yet also with extensive details on each single topic.
Download or read book The Handbook of Surface Imaging and Visualization written by Arthur T. Hubbard and published by CRC Press. This book was released on 2022-04-13 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new handbook investigates the characterization of surfaces. It emphasizes experimental techniques for imaging of solid surfaces and theoretical strategies for visualization of surfaces, areas in which rapid progress is currently being made. This comprehensive, unique volume is the ideal reference for researchers needing quick access to the latest developments in the field and an excellent introduction to students who want to acquaint themselves with the behavior of electrons, atoms, molecules, and thin-films at surfaces. It's all here, under one cover! The Handbook of Surface Imaging and Visualization is filled with sixty-four of the most powerful techniques for characterization of surfaces and interfaces in the material sciences, medicine, biology, geology, chemistry, and physics. Each discussion is easy to understand, succinct, yet incredibly informative. Data illustrate present research in each area of study. A wide variety of the latest experimental and theoretical approaches are included with both practical and fundamental objectives in mind. Key references are included for the reader's convenience for locating the most recent and useful work on each topic. Readers are encouraged to contact the authors or consult the references for additional information. This is the best ready reference available today. It is a perfect source book or supplemental text on the subject.
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book Friction Induced Vibrations and Self Organization written by Michael Nosonovsky and published by CRC Press. This book was released on 2013-08-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many scientists and engineers do not realize that, under certain conditions, friction can lead to the formation of new structures at the interface, including in situ tribofilms and various patterns. In turn, these structures-usually formed by destabilization of the stationary sliding regime-can lead to the reduction of friction and wear. Friction-I
Download or read book Transient Effects in Friction written by Andreas Goedecke and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transient friction effects determine the behavior of a wide class of mechatronic systems. Classic examples are squealing brakes, stiction in robotic arms, or stick-slip in linear drives. To properly design and understand mechatronic systems of this type, good quantitative models of transient friction effects are of primary interest. The theory developed in this book approaches this problem bottom-up, by deriving the behavior of macroscopic friction surfaces from the microscopic surface physics. The model is based on two assumptions: First, rough surfaces are inherently fractal, exhibiting roughness on a wide range of scales. Second, transient friction effects are caused by creep enlargement of the real area of contact between two bodies. This work demonstrates the results of extensive Finite Element analyses of the creep behavior of surface asperities, and proposes a generalized multi-scale area iteration for calculating the time-dependent real contact between two bodies. The toolset is then demonstrated both for the reproduction of a variety of experimental results on transient friction as well as for system simulations of two example systems.
