Download or read book Mechanics of Fibrous Composites written by M.H. Datoo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced plastic (FRP) composite materials are basically of two types. The first type is short fibres reinforced in a plastic matrix, and the other type continuous (long) fibres reinforced in a plastic matrix. The exact distinction between a short and a continuous fibre is discussed in Chapter 1. Continuous fibre-reinforced composite materials are referred to by many labels: FRP composites, advanced composites, fibrous composites, composite materials or simply composites. These terms are now generally accepted to mean the same type of material, namely, continuous fibre reinforced in plastic. In this book, the term fibrous composites is used to define a continuous fibre reinforced in plastic. Fibrous composites are presently in use for a variety of structural applica tions, and may offer an alternative to conventional metallic materials. The behaviour of fibrous composites subjected to a loading condition is very different from that of a metallic isotropic material. Therefore, 'new' analytical and testing methods are required to analyse a structural element and sections made from layered fibrous composites. There are a number of books written on the subject of composite materials. All of these are excellent in their content and achieve the authors' objectives.

Download or read book Continuum Theory of the Mechanics of Fibre Reinforced Composites written by A.J.M. Spencer and published by Springer. This book was released on 2014-05-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Testing of Advanced Fibre Composites written by J M Hodgkinson and published by Elsevier. This book was released on 2000-10-27 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing of composite materials can present complex problems but is essential in order to ensure the reliable, safe and cost-effective performance of any engineering structure. This essentially practical book, complied from the contributions of leading professionals in the field, describes a wide range of test methods which can be applied to various types of advanced fibre composites. The book focuses on high modulus, high strength fibre/plastic composites and also covers highly anisotrpoic materials such as carbon, aramid and glass.Engineers and designers specifying the use of materials in structures will find this book an invaluable guide to best practice throughout the range of industrial sectors where FRCs are employed.

Download or read book Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures written by J. Hult and published by Springer. This book was released on 2014-05-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims at giving an overview of current methods in engineering mechanics of FRP components and structures as well as hybrid components and structures. Main emphasis is on basic micro and macro mechanics of laminates. Long as well as short fibre composites are studied, and criteria for different kinds of rupture are treated. Micromechanical considerations for material characterization and mechanisms of static ductile and brittle rupture are studied, as well as FRP structures under thermal and dynamic loading programs. Optimum design and manufacture situations are described as well. The book makes designers familiar with the opportunities and limitations of modern high quality fibre composites. Practical engineering applications of the described analytical and numerical methods are also presented.

Download or read book Fiber Reinforced Composites written by P.K. Mallick and published by CRC Press. This book was released on 2007-11-19 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a bestseller offers a current perspective on the mechanics, characteristics, test methods, applications, manufacturing processes, and design aspects of composites. Highlighting materials such as nanocomposites and smart materials, the book contains new information on material substitution, cost analysis, nano- and natural fibers, fiber architecture, carbon-carbon composites, thermoplastics matrix composites, resin transfer molding, and test methods such as fiber bundle tests and interlaminar fracture measurements. It presents a new chapter on polymer-based nanocomposites. New examples and additional problems emphasize problem-solving skills used in real-world applications.

Download or read book Discontinuous Fibre Reinforced Composites written by Kheng Lim Goh and published by Springer. This book was released on 2016-10-22 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simple and unified approach to the mechanics of discontinuous-fibre reinforced composites, and introduces readers as generally as possible to the key concepts regarding the mechanics of elastic stress transfer, intermediate modes of stress transfer, plastic stress transfer, fibre pull-out, fibre fragmentation and matrix rupture. These concepts are subsequently applied to progressive stages of the loading process, through to the composite fractures. The book offers a valuable guide for advanced undergraduate and graduate students attending lecture courses on fibre composites. It is also intended for beginning researchers who wish to develop deeper insights into how discontinuous fibre provides reinforcement to composites, and for engineers, particularly those who wish to apply the concepts presented here to design and develop discontinuous-fibre reinforced composites.

Download or read book Mechanical and Physical Testing of Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites covers key aspects of fracture and failure in natural/synthetic fiber reinforced polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. Topics of interest include mechanical properties, such as tensile, flexural, compression, shear, impact, fracture toughness, low and high velocity impact, and anti-ballistic properties of natural fiber, synthetic fibers and hybrid composites materials. It also covers physical properties, such as density, water absorption, thickness swelling, and void content of composite materials fabricated from natural or synthetic materials. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. Contains contributions from leading experts in the field Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials Covers experimental, analytical and numerical analysis Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques

Download or read book Mechanics of Fiber and Textile Reinforced Cement Composites written by Barzin Mobasher and published by CRC Press. This book was released on 2011-09-20 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among all building materials, concrete is the most commonly used-and there is a staggering demand for it. However, as we strive to build taller structures with improved seismic resistance or durable pavement with an indefinite service life, we require materials with better performance than the conventional materials used today. Considering the enor

Download or read book Load Bearing Fibre Composites written by Michael R. Piggott and published by Elsevier. This book was released on 2016-01-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Load-Bearing Fibre Composites provides a unified view of the entire field of fiber and platelet composites. This book explores the complex interactions between fibers and matrix. Organized into 12 chapters, this book begins with an overview of the fundamental ideas in the field of fiber reinforced composites. This text then provides data on their load-bearing capabilities. Other chapters consider a rough estimate of how strong a material could be and describe the two main sources of weakness in real materials. This book discusses as well the slender forms of material and describes the simple slip theory of reinforcement that gives the modulus and strength for aligned short-fiber composites. The final chapter deals with the versatile use of fiber reinforced materials, which can be designed for a specific application by suitable choice of components and volume fraction. This book is a valuable resource for materials scientists, metallurgists, designers, engineers, and research workers.

Download or read book Fundamentals of Fibre Reinforced Composite Materials written by A.R. Bunsell and published by CRC Press. This book was released on 2005-06-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber reinforced composite materials encompass a wide range of material classes from reinforced glasses, plastics, and rubbers through to more recently developed metals and ceramics. Fundamentals of Fibre Reinforced Composite Materials is a comprehensive and authoritative book that introduces the topic with a brief history of composite development, a review of composite applications, the types of fibre used, and their respective indiviual properties. An entire chapter considers organic matrices and their behavior, reviewing all of the most commonly encountered polymer matrix systems. Composite manufacturing techniques are then discussed, including those methods employed in the production of advanced metal and ceramic matrix composites. The remaining chapters are devoted primarily to theoretical treatments of composite behavior, with emphasis on the understanding of damage mechanisms such as cracking, delamination, and fibre breakage. Where a mathematical approach is required, an attempt is made to relate the sometimes rather abstract notions back at the structure of the material being discussed. With extensive sets of sample problems accompanying each chapter, Fundamentals of Fibre Reinforced Composite Materials is ideally suited to undergraduate and graduate students of materials science, structural, mechanical, and aeronautical engineering, polymer science, metallurgy, physics and chemistry. It will also be of use as a reference to researchers working with composite materials and material scientists in general.

Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.

Download or read book Multi Scale Continuum Mechanics Modelling of Fibre Reinforced Polymer Composites written by Wim Van Paepegem and published by Woodhead Publishing. This book was released on 2020-11-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale modelling of composites is a very relevant topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large industrial players such as Siemens (Virtual Material Characterization toolkit and MultiMechanics virtual testing software), MSC/e-Xstream (Digimat software), Simulia (micromechanics plug-in in Abaqus), HyperSizer (Multi-scale design of composites), Altair (Altair Multiscale Designer) This book is intended to be an ideal reference on the latest advances in multi-scale modelling of fibre-reinforced polymer composites, that is accessible for both (young) researchers and end users of modelling software. We target three main groups: This book aims at a complete introduction and overview of the state-of-the-art in multi-scale modelling of composites in three axes: • ranging from prediction of homogenized elastic properties to nonlinear material behaviour • ranging from geometrical models for random packing of unidirectional fibres over meso-scale geometries for textile composites to orientation tensors for short fibre composites • ranging from damage modelling of unidirectionally reinforced composites over textile composites to short fibre-reinforced composites The book covers the three most important scales in multi-scale modelling of composites: (i) micro-scale, (ii) meso-scale and (iii) macro-scale. The nano-scale and related atomistic and molecular modelling approaches are deliberately excluded, since the book wants to focus on continuum mechanics and there are already a lot of dedicated books about polymer nanocomposites. A strong focus is put on physics-based damage modelling, in the sense that the chapters devote attention to modelling the different damage mechanisms (matrix cracking, fibre/matrix debonding, delamination, fibre fracture,...) in such a way that the underlying physics of the initiation and growth of these damage modes is respected. The book also gives room to not only discuss the finite element based approaches for multi-scale modelling, but also much faster methods that are popular in industrial software, such as Mean Field Homogenization methods (based on Mori-Tanaka and Eshelby solutions) and variational methods (shear lag theory and more advanced theories). Since the book targets a wide audience, the focus is put on the most common numerical approaches that are used in multi-scale modelling. Very specialized numerical methods like peridynamics modelling, Material Point Method, eXtended Finite Element Method (XFEM), isogeometric analysis, SPH (Smoothed Particle Hydrodynamics),... are excluded. Outline of the book The book is divided in three large parts, well balanced with each a similar number of chapters:

Download or read book Design and Manufacture of Fibre Reinforced Composites written by Wayne Hall and published by Springer Nature. This book was released on 2021-08-05 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the design and manufacture of fibre-reinforced composites. The mechanical properties of unidirectional composites are considered in a structural design context. The use of woven and random fibres is also addressed. The accuracy of design estimates for unidirectional composites is benchmarked against test data, and the relevance of a factor of safety (FoS) is established. The importance of prototype testing is emphasised. This book illustrates how to make a fibre-reinforced composite. Wet layup, vacuum bagging and prepreg moulding are covered in detail. Some guidance on mould design and construction is also provided. Finally, an introduction to the manufacture of composite tubes is presented. Wherever possible, design and make examples are used to illustrate the content. Tutorial questions and problems are included at the end of each chapter. The reader is encouraged to use these questions and problems to assess their own level of understanding of the content.

Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. State of the art analysis of impact response, damage tolerance and failure of FRC materials Distinguished contributors provide expert analysis of the most recent materials and structures Valuable tool for R&D engineers, materials scientists and designers

Download or read book Fiber Technology for Fiber Reinforced Composites written by M. Ozgur Seydibeyoglu and published by Woodhead Publishing. This book was released on 2017-05-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber Technology for Fiber-Reinforced Composites provides a detailed introduction to fiber reinforced composites, explaining the mechanics of fiber reinforced composites, along with information on the various fiber types, including manufacturing of fibers (starting from monomers and precursors), fiber spinning techniques, testing of fibers, and surface modification of fibers. As material technologies develop, composite materials are becoming more and more important in transportation, construction, electronics, sporting goods, the defense industry, and other areas of research. Many engineers working in industry and academics at universities are trying to manufacture composite materials using a limited number of fiber types with almost no information on fiber technology, fiber morphology, fiber properties, and fiber sizing agents. This book fills that gap in knowledge. Unique in that it focuses on a broad range of different fiber types used in composites manufacturing Contains contributions from leading experts working in both industry and academia Provides comprehensive coverage on both natural and nanofibers

Download or read book Science and Engineering of Short Fibre Reinforced Polymer Composites written by Shao-yun Fu and published by Woodhead Publishing. This book was released on 2019-08-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Short Fibre Reinforced Polymer Composites, Second Edition, provides the latest information on the ‘short fiber reinforced composites' (SFRP) that have found extensive applications in automobiles, business machines, durable consumer items, sporting goods and electrical industries due to their low cost, easy processing and superior mechanical properties over parent polymers. This updated edition presents new developments in this field of research and includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, and both modern computational and process engineering methods. Reviews the mechanical properties and functions of short fiber reinforced polymer composites (SFRP) Examines recent developments in the fundamental mechanisms of SFRP's Assesses major factors affecting mechanical performance, such as stress transfer and strength Includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, modern computational methods, and process engineering methods

Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.