Download or read book Mechanics and Thermomechanics of Rubberlike Solids written by Guiseppe Saccomandi and published by Springer Science & Business Media. This book was released on 2004-03-30 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives for the first time an interdisciplinary and deep approach to the mathematical modelling of rubber-like materials considering both the molecular and phenomenological point of views. It contains an introduction to the suitable numerical techniques and an overview of experimental techniques and data with a short survey on some industrial applications. Elastic and inelastic effects are discussed in details. The book is suitable for applied mathematicians, mechanical engineers, civil engineers, material scientists and polymer scientists.
Download or read book Mechanics and Thermomechanics of Rubberlike Solids written by Guiseppe Saccomandi and published by Springer. This book was released on 2014-05-04 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives for the first time an interdisciplinary and deep approach to the mathematical modelling of rubber-like materials considering both the molecular and phenomenological point of views. It contains an introduction to the suitable numerical techniques and an overview of experimental techniques and data with a short survey on some industrial applications. Elastic and inelastic effects are discussed in details. The book is suitable for applied mathematicians, mechanical engineers, civil engineers, material scientists and polymer scientists.
Download or read book Thermomechanics of Solids and Structures written by Marko Canadija and published by Elsevier. This book was released on 2023-04-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanics of Solids and Structures: Physical Mechanisms, Continuum Mechanics, and Applications covers kinematics, balance equations, the strict thermodynamic frameworks of thermoelasticity, thermoplasticity, creep covering constitutive equations, the physical mechanisms of deformation, along with computational aspects. The book concludes with coverage of the thermodynamics of solids and applications of the constitutive three-dimensional model to both one-dimensional homogeneous and composite beam structures. Practical applications of the theories and techniques covered are emphasized throughout the book, with analytical solutions provided for various problems. Provides foundational knowledge on continuum mechanics, covering kinematics, balance equations, isothermal elasticity and plasticity, variational principles, and more Presents applications of constitutive 3D models to homogeneous and composite beams, including equations for stress and displacement estimation in thermoelastic beam problems Reviews experimental results of thermoelastic material behavior, along with case studies to support reviews Covers the inelastic behavior of materials at elevated temperatures, with experimental results for both monotonic and cyclic tensile tests presented Looks at the physical mechanisms, experimental results, and constitutive modeling of creep
Download or read book Mechanics of the 21st Century written by Witold Gutkowski and published by Springer Science & Business Media. This book was released on 2005-07-07 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 21st International Congress of Theoretical and Applied Mechanics, ICTAM04, held in Warsaw, in August 2004. Full texts of 27 invited lectures are included. The book captures a snapshot view of the state-of-the-art in the field of contemporary mechanics and will be invaluable to engineers and scientists from a variety of disciplines with interest in the mechanical sciences. The importance of the influence of contemporary mechanics on other branches of sciences becomes evident by browsing through over 60 areas of interest selected as subjects of mini-symposia and pre-nominated sessions. The book gives clear evidence that "...the progress we have achieved together definitely places mechanics on one of the very top locations in the hierarchy of modern research disciplines – with tremendous impact on both our perception of the physical world and the means to implement new technologies so much improving the quality of our life." (M. Kleiber, Opening Speech).
Download or read book Constitutive Models for Rubber XI written by Bertrand Huneau and published by CRC Press. This book was released on 2019-06-14 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Models for Rubber XI is a comprehensive compilation of both the oral and poster contributions to the European Conference on Constitutive Models for Rubber. This 11th edition, held in Nantes (France) 25-27th June 2019, is the occasion to celebrate the 20th anniversary of the ECCMR series. Around 100 contributions reflect the state-of-the-art in the mechanics of elastomers. They cover the fields of: Material testing Constitutive modelling and finite element implementation Micromechanical aspects, and Durability (failure, fatigue and ageing) Constitutive Models for Rubber XI is of interest for developers and researchers involved in the rubber processing and CAE software industries, as well as for academics in nearly all disciplines of elastomer mechanics and technology.
Download or read book Rubber Science written by Yuko Ikeda and published by Springer. This book was released on 2017-09-26 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date text on rubber science and is a breakthrough among many rubber-related publications. Emphasis is placed on the most modern scientific approaches to rubber science, departing from the usual detailed descriptions of trial-and-error results of traditional rubber technology. The book is a good introduction to modern rubber science both for graduate students and for more or less experienced rubber engineers for updating their way of thinking in handling of technological problems. Due to the increasing importance of pneumatic tires of vehicles and aircraft in modern transportation, this work will be of great use for general readers as well, including those who are concerned with sustainable development.
Download or read book Constitutive Models for Rubber IV written by Per-Erik Austrell and published by Routledge. This book was released on 2017-12-04 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of elastomeric materials offer numerous advantages in many engineering applications. Elastomeric units are used as couplings or mountings between rigid components, for example in shock absorbers, vibration insulators, flexible joints, seals and suspensions, etc. However, the complicated nature of the behaviour of such material makes it difficult to accurately predict the performance of these units using finite element modelling, for example. It is imperative that constitutive models accurately capture relevant aspects of mechanical behaviour. The latest developments concerning constitutive modelling of rubber is collected in these Proceedings. Topics included in this volume are, Hyperelastic models, Strength, fracture & fatigue, Dynamic properties & the Fletcher-Gent effect, Micro-mechanical & statistical approaches, Stress softening, iscoelasticity, Filler reinforcement, and Tyres, fibre & cord reinforced rubber.
Download or read book Proceedings WASCOM 2003 written by Roberto Monaco and published by World Scientific. This book was released on 2004 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains about 20 invited papers and 40 contributed papers in the research areas of theoretical continuum mechanics, kinetic theory and numerical applications of continuum mechanics. Collectively these papers give a good overview of the activities and developments in these fields in the last few years.The proceedings have been selected for coverage in: ? Index to Scientific & Technical Proceedings? (ISTP? / ISI Proceedings)? Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)? CC Proceedings ? Engineering & Physical Sciences
Download or read book Waves And Stability In Continuous Media Proceedings Of The 12th Conference On Wascom 2003 written by Roberto Monaco and published by World Scientific. This book was released on 2004-04-16 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains about 20 invited papers and 40 contributed papers in the research areas of theoretical continuum mechanics, kinetic theory and numerical applications of continuum mechanics. Collectively these papers give a good overview of the activities and developments in these fields in the last few years.The proceedings have been selected for coverage in:• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences
Download or read book Recent Developments in Thermomechanics of Solids written by G. Lebon and published by Springer. This book was released on 1980-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.
Download or read book Thermomechanics written by J. C. Gibbings and published by Elsevier. This book was released on 2016-06-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanics gives an introduction to the governing equations of thermodynamics and of the mechanics of fluids. The book first gives a summary of the Newtonian mechanics of rigid bodies, which is followed by a discussion of mechanical properties of infinitesimal elements, including continuum, density, surface tension, stresses, and pressure. Temperature and the zero'th law; units; and the system of finite size are then examined. The book also explains the laws of thermodynamics including its applications. Heat processes, motionless fluids, and mixtures of phases are also tackled. The text then explains the conservation of mass in a fluid flow; the equations relating process phenomena; and the momentum equation for fluids in motion. The last part encompasses the adiabatic flow. The text will best serve those interested in thermomechanics and related concepts.
Download or read book Constitutive Models for Rubber VI written by Gert Heinrich and published by CRC Press. This book was released on 2009-09-01 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in order to represent the material behaviour of filler-reinforced elastomers under realistic operating conditions are collected in this volume. Special topics are finite element simulations and methods, dynamic material properties, experimental characterization, lifetime prediction, friction, multiphysics and biomechanics, reinf
Download or read book Finite Elasticity Theory written by David J. Steigmann and published by Oxford University Press. This book was released on 2017-08-25 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing case studies and examples, the book aims to cover extensive research particularly on surface stress and topics related to the variational approach to the subject, and non-standard topics such as the rigorous treatment of constraints and a full discussion of algebraic inequalities associated with realistic material behaviour, and their implications. Serving as an introduction to the basic elements of Finite Elasticity, this textbook is the cornerstone for any graduate-level on the topic, while also providing a template for a host of theories in Solid Mechanics.
Download or read book Thermomechanics of Elastoplastic Deformation written by Aleksey a. Markin and published by Cambridge International Science Publishing. This book was released on 2014-09-30 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this monograph the authors used the thermo-mechanical approach to focus on processes of reversible and irreversible equilibrium deformation of isotropic and anisotropic solids. The presented models can be generalized for the case of finite deformations in the construction of images in spaces of nonholonomic measures. Formulation of associated boundary value problems of solid mechanics in variational form, the issues of non-uniqueness and stability of finite deformation processes are also discussed.
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2017-03-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.
Download or read book Mechanics of Soft Materials written by Konstantin Volokh and published by Springer. This book was released on 2019-06-11 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise introduction to soft matter modelling, together with an up-to-date review of the continuum mechanical description of soft and biological materials, from the basics to the latest scientific materials. It also includes multi-physics descriptions, such as chemo-, thermo-, and electro-mechanical coupling. The new edition includes a new chapter on fractures as well as numerous corrections, clarifications and new solutions. Based on a graduate course taught for the past few years at Technion, it presents original explanations for a number of standard materials, and features detailed examples to complement all topics discussed.
Download or read book Continuum Mechanics Volume I written by José Merodio and published by EOLSS Publications. This book was released on 2011-11-30 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of continuum mechanics is to predict the response of a body that is under the action of external and/or internal influences, i.e. to capture and describe different mechanisms associated with the motion of a body that is under the action of loading. A body in continuum mechanics is considered to be matter continuously distributed in space. Hence, no attention is given to the microscopic (atomic) structure of real materials although non-classical generalized theories of continuum mechanics are able to deal with the mesoscopic structure of matter (i.e. defects, cracks, dispersive lengths, ...). Matter occupies space in time and the response of a body in continuum mechanics is restricted to the Newtonian space-time of classical mechanics in this volume. Einstein’s theory of relativity is not considered. In the classical sense, loading is considered as any action that changes the motion of the body. This includes, for instance, a change in temperature or a force applied. By introducing the concept of configurational forces a load may also be considered as a force that drives a change in the material space, for example the opening of a crack. Continuum mechanics refers to field descriptions of phenomena that are usually modeled by partial differential equations and, from a mathematical point of view, require non-standard knowledge of non-simple technicalities. One purpose in this volume has been to present the different subjects in a self-contained way for a general audience. The organization of the volume is as follows. Mathematically, to predict the response of a body it is necessary to formulate boundary value problems governed by balance laws. The theme of the volume, that is an overview of the subject, has been written with this idea in mind for beginners in the topic. Chapter 1 is an introduction to continuum mechanics based on a one-dimensional framework in which, simultaneously, a more detailed organization of the chapters of this volume is given. A one-dimensional approach to continuum mechanics in some aspects maybe misleading since the analysis is oversimplified. Nevertheless, it allows us to introduce the subject through the early basic steps of the continuum analysis for a general audience. Chapters 3, 4 and 5 are devoted to the mathematical setting of continuum analysis: kinematics, balance laws and thermodynamics, respectively. Chapters 6 and 7 are devoted to constitutive equations. Chapters 8 and 9 deal with different issues in the context of linear elastostatics and linear elastodynamics and waves, respectively, for solids. Linear Elasticity is a classical and central theory of continuum mechanics. Chapter 10 deals with fluids while chapter 11 analyzes the coupled theory of thermoelasticity. Chapter 12 deals with nonlinear elasticity and its role in the continuum framework. Chapters 13 and 14 are dedicated to different applications of solid and fluid mechanics, respectively. The rest of the chapters involve some advanced topics. Chapter 15 is dedicated to turbulence, one of the main challenges in fluid mechanics. Chapter 16 deals with electro-magneto active materials (a coupled theory). Chapter 17 deals with specific ideas of soft matter and chapter 18 deals with configurational forces. In chapter 19, constitutive equations are introduced in a general (implicit) form. Well-posedness (existence, time of existence, uniqueness, continuity) of the equations of the mechanics of continua is an important topic which involves sophisticated mathematical machinery. Chapter 20 presents different analyses related to these topics. Continuum Mechanics is an interdisciplinary subject that attracts the attention of engineers, mathematicians, physicists, etc., working in many different disciplines from a purely scientific environment to industrial applications including biology, materials science, engineering, and many other subjects.
