Download or read book Mechanical Vibration Shock and Condition Monitoring written by and published by . This book was released on 2009 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibrations and Condition Monitoring written by Juan Carlos A. Jauregui Correa and published by Academic Press. This book was released on 2020-03-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations and Condition Monitoring presents a collection of data and insights on the study of mechanical vibrations for the predictive maintenance of machinery. Seven chapters cover the foundations of mechanical vibrations, spectrum analysis, instruments, causes and effects of vibration, alignment and balancing methods, practical cases, and guidelines for the implementation of a predictive maintenance program. Readers will be able to use the book to make predictive maintenance decisions based on vibration analysis. This title will be useful to senior engineers and technicians looking for practical solutions to predictive maintenance problems. However, the book will also be useful to technicians looking to ground maintenance observations and decisions in the vibratory behavior of machine components. Presents data and insights into mechanical vibrations in condition monitoring and the predictive maintenance of industrial machinery Defines the key concepts related to mechanical vibration and its application for predicting mechanical failure Describes the dynamic behavior of most important mechanical components found in industrial machinery Explains fundamental concepts such as signal analysis and the Fourier transform necessary to understand mechanical vibration Provides analysis of most sources of failure in mechanical systems, affording an introduction to more complex signal analysis
Download or read book Mechanical Vibration Shock and Condition Monitoring Vocabulary written by and published by . This book was released on 2009 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.
Download or read book Mechanical Vibration and Shock Performance Parameters for Condition Monitoring of Structures written by British Standards Institute Staff and published by . This book was released on 2004-12-07 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration, Mechanical shock, Structures, Performance, Data acquisition, Vibration measurement
Download or read book Mechanical Vibration Shock and Condition Monitoring Vocabulary written by British Standards Institute Staff and published by . This book was released on 2009-11-30 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical shock, Vibration, Mechanics, Vocabulary, Terminology, Mechanical behaviour of materials, Transducers, Formulae (mathematics), Mathematics, Data representation, Signal processing
Download or read book Vibratory Condition Monitoring of Machines written by J. S. Rao and published by CRC Press. This book was released on 2000 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibratory Condition Monitoring of Machines discusses the basic principles applicable in understanding the vibratory phenomena of rotating and reciprocating machines. It also addresses the defects that influence vibratory phenomenon, instruments and analysis procedures for maintenance, vibration related standards, and the expert systems that help ensure good maintenance programs. The author offers a minimal treatment of the mathematical aspects of the subject, focusing instead on imparting a physical understanding to help practicing engineers develop maintenance programs and operate machines efficiently.
Download or read book Vibration Based Condition Monitoring of Wind Turbines written by Tomasz Barszcz and published by Springer. This book was released on 2018-12-04 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail different types of vibration signals and the signal processing methods, including signal resampling and signal envelope, used for condition monitoring of drivetrains. A special emphasis is placed on wind turbines and on the fact that they work in highly varying operational conditions. The core of the book is devoted to cutting-edge methods used to validate and process vibration data in these conditions. Key case studies, where advanced signal processing methods are used to detect failures of gearboxes and bearings of wind turbines, are described and discussed in detail. Vibration sensors, SCADA (Supervisory Control and Data Acquisition), portable data analyzers and online condition monitoring systems, are also covered. This book offers a timely guide to both researchers and professionals working with wind turbines (but also other machines), and to graduate students willing to extend their knowledge in the field of vibration analysis.
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2021-07-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration-based Condition Monitoring Stay up to date on the newest developments in machine condition monitoring with this brand-new resource from an industry leader The newly revised Second Edition of Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications delivers a thorough update to the most complete discussion of the field of machine condition monitoring. The distinguished author offers readers new sections on diagnostics of variable speed machines, including wind turbines, as well as new material on the application of cepstrum analysis to the separation of forcing functions, structural model properties, and the simulation of machines and faults. The book provides improved methods of order tracking based on phase demodulation of reference signals and new methods of determining instantaneous machine speed from the vibration response signal. Readers will also benefit from an insightful discussion of new methods of calculating the Teager Kaiser Energy Operator (TKEO) using Hilbert transform methods in the frequency domain. With a renewed emphasis on the newly realized possibility of making virtual instruments, readers of Vibration-based Condition Monitoring will benefit from the wide variety of new and updated topics, like: A comprehensive introduction to machine condition monitoring, including maintenance strategies, condition monitoring methods, and an explanation of the basic problem of condition monitoring An exploration of vibration signals from rotating and reciprocating machines, including signal classification and torsional vibrations An examination of basic and newly developed signal processing techniques, including statistical measures, Fourier analysis, Hilbert transform and demodulation, and digital filtering, pointing out the considerable advantages of non-causal processing, since causal processing gives no benefit for condition monitoring A discussion of fault detection, diagnosis and prognosis in rotating and reciprocating machines, in particular new methods using fault simulation, since “big data” cannot provide sufficient data for late-stage fault development Perfect for machine manufacturers who want to include a machine monitoring service with their product, Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications will also earn a place in university and research institute libraries where there is an interest in machine condition monitoring and diagnostics.
Download or read book Vibration and Shock Handbook written by Clarence W. de Silva and published by CRC Press. This book was released on 2005-06-27 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every so often, a reference book appears that stands apart from all others, destined to become the definitive work in its field. The Vibration and Shock Handbook is just such a reference. From its ambitious scope to its impressive list of contributors, this handbook delivers all of the techniques, tools, instrumentation, and data needed to model, analyze, monitor, modify, and control vibration, shock, noise, and acoustics. Providing convenient, thorough, up-to-date, and authoritative coverage, the editor summarizes important and complex concepts and results into “snapshot” windows to make quick access to this critical information even easier. The Handbook’s nine sections encompass: fundamentals and analytical techniques; computer techniques, tools, and signal analysis; shock and vibration methodologies; instrumentation and testing; vibration suppression, damping, and control; monitoring and diagnosis; seismic vibration and related regulatory issues; system design, application, and control implementation; and acoustics and noise suppression. The book also features an extensive glossary and convenient cross-referencing, plus references at the end of each chapter. Brimming with illustrations, equations, examples, and case studies, the Vibration and Shock Handbook is the most extensive, practical, and comprehensive reference in the field. It is a must-have for anyone, beginner or expert, who is serious about investigating and controlling vibration and acoustics.
Download or read book Equipment Conditioning Monitoring and Techniques written by Alexander Arnfinn Olsen and published by Springer Nature. This book was released on with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Monitoring Testing and Instrumentation written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-04-19 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling a system's vibrational behavior, whether for reducing harmful vibrations or for enhancing useful types, is critical to ensure safe and economical operation as well as longer structural and equipment lifetimes. A related issue is the effect of vibration on humans and their environment. Achieving control of vibration requires thorough und
Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.
Download or read book Harris Shock and Vibration Handbook written by Allan G. Piersol and published by McGraw Hill Professional. This book was released on 2009-10-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic reference on shock and vibration, fully updated with the latest advances in the field Written by a team of internationally recognized experts, this comprehensive resource provides all the information you need to design, analyze, install, and maintain systems subject to mechanical shock and vibration. The book covers theory, instrumentation, measurement, testing, control methodologies, and practical applications. Harris' Shock and Vibration Handbook, Sixth Edition, has been extensively revised to include innovative techniques and technologies, such as the use of waveform replication, wavelets, and temporal moments. Learn how to successfully apply theory to solve frequently encountered problems. This definitive guide is essential for mechanical, aeronautical, acoustical, civil, electrical, and transportation engineers. EVERYTHING YOU NEED TO KNOW ABOUT MECHANICAL SHOCK AND VIBRATION, INCLUDING Fundamental theory Instrumentation and measurements Procedures for analyzing and testing systems subject to shock and vibration Ground-motion, fluid-flow, wind-. and sound-induced vibration Methods for controlling shock and vibration Equipment design The effects of shock and vibration on humans
Download or read book Rotating Machinery Structural Health Monitoring Shock and Vibration Volume 5 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-03-24 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5 Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the fifth volume of six from the Conference, brings together 35 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Rotating Machinery, Structural Health Monitoring, as well as Shock and Vibration, along with other structural engineering areas.
Download or read book Mechanical Vibration and Shock Mechanical Mounting of Accelerometers written by British Standards Institute Staff and published by . This book was released on 1998-07-15 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerometers, Acceleration measurement, Vibration measurement, Mechanical measurement, Mechanical shock, Seatings, Frequencies, Fixing, Test equipment, Frequency response, Vibration testing, Transducers, Resonance, Joints, Selection, Mounting instructions
Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.
