Download or read book Mechanical Response of Composites written by Pedro P. Camanho and published by Springer Science & Business Media. This book was released on 2008-06-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Themethodologyfordesigninghigh-performancecompositestructuresisstill evo- ing. The complexity of the response of composite materials and the dif?culties in predicting the composite material properties from the basic properties of the c- stituents result in the need for a well-planned and exhaustive test program. The recommended practice to mitigate the technological risks associated with advanced composite materials is to substantiate the performance and durability of the design in a sequence of steps known as the Building Block Approach. The Building Block Approach ensures that cost and performance objectives are met by testing greater numbers of smaller, less expensive specimens. In this way, technology risks are assessed early in the program. In addition, the knowledge acquired at a given level of structural complexity is built up before progressing to a level of increased complexity. Achieving substantiation of structural performance by testing alone can be p- hibitively expensive because of the number of specimens and components required to characterize all material systems, loading scenarios and boundary conditions. Building Block Approachprogramscan achieve signi?cant cost reductionsby se- ing a synergy between testing and analysis. The more the development relies on analysis, the less expensive it becomes. The use of advanced computational models for the prediction of the mechanical response of composite structures can replace some of the mechanical tests and can signi?cantly reduce the cost of designing with composites while providing to the engineers the information necessary to achieve an optimized design.
Download or read book Effects of Fiber Directions on the Mechanical Response of Composite Materials written by Jacob Aboudi and published by . This book was released on 1976 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Fibres and Their Composites written by Erich Fitzer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proper choice of technology is a complex decision, particularly for developing countries, as it depends not only on local needs and conditions but also, importantly, on the national political context and, increasingly, on the international environment. This technological choice carries with it the genetic code of the nation's future development. Many developing countries which lack the needed infrastructure do not have real options; others with a reservoir of scientific and engineering skills and explicit SIT strategies, can indeed choose between alternatives. Turning to the technologies themselves, these cover a wide spectrum: traditional technologies that are low-cost, low-energy and often better suited to meet basic needs; more sophisticated technologies which are highly knowledge-intensive and require large capital outlays for research, product design and manufacturing; and still others which depend upon a blending of modern technology with traditional methods to create products and processes more suited to local needs. Even within the group of advanced technologies, there is considerable differentiation, and those at the lower end of the product cycle are clearly within reach by the newly industri alizing countries.
Download or read book Mechanical Response and Thermal Conductivity of Two phase Composite Materials written by Tomoyuki Hiroyasu and published by . This book was released on 1992 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mechanics of Composite Materials written by Valery V. Vasiliev and published by Elsevier. This book was released on 2007-05-16 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been representing most significant breakthroughs in various industrial applications, particularly in aerospace structures, during the past thirty five years. The primary goal of Advanced Mechanics of Composite Materials is the combined presentation of advanced mechanics, manufacturing technology, and analysis of composite materials. This approach lets the engineer take into account the essential mechanical properties of the material itself and special features of practical implementation, including manufacturing technology, experimental results, and design characteristics. Giving complete coverage of the topic: from basics and fundamentals to the advanced analysis including practical design and engineering applications. At the same time including a detailed and comprehensive coverage of the contemporary theoretical models at the micro- and macro- levels of material structure, practical methods and approaches, experimental results, and optimisation of composite material properties and component performance. The authors present the results of more than 30 year practical experience in the field of design and analysis of composite materials and structures. * Eight chapters progressively covering all structural levels of composite materials from their components through elementary plies and layers to laminates* Detailed presentation of advanced mechanics of composite materials * Emphasis on nonlinear material models (elasticity, plasticity, creep) and structural nonlinearity
Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.
Download or read book Mechanical Testing of Advanced Fibre Composites written by J M Hodgkinson and published by Elsevier. This book was released on 2000-10-27 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing of composite materials can present complex problems but is essential in order to ensure the reliable, safe and cost-effective performance of any engineering structure. This essentially practical book, complied from the contributions of leading professionals in the field, describes a wide range of test methods which can be applied to various types of advanced fibre composites. The book focuses on high modulus, high strength fibre/plastic composites and also covers highly anisotrpoic materials such as carbon, aramid and glass.Engineers and designers specifying the use of materials in structures will find this book an invaluable guide to best practice throughout the range of industrial sectors where FRCs are employed.
Download or read book Modeling the Mechanical Response of Fibrous Monolith Composites written by Liwei Lu and published by . This book was released on 2009 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Polymers and Composites Second Edition written by Robert F. Landel and published by CRC Press. This book was released on 1993-12-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, now in its second edition, offers an up-to-date, expanded treatment of the behaviour of polymers with regard to material variables and test and use conditions. It highlights general principles, useful empirical rules and practical equations.;Detailing the specific behaviour of many common polymers, the text: places emphasis on time and frequency dependence over temperature dependence; uses contemporary molecular mechanisms to explain creep, stress relaxation, constant strain rate responses and crazing; provides explicit equations to predict responses; supplies a discussion of large deformation multiaxial responses; compares statistical and continuum theories on the same data set; and updates stress-strain behaviour and particulate filled systems.
Download or read book Plastic Deformation of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.
Download or read book Mechanics Of Composite Materials written by Robert M. Jones and published by CRC Press. This book was released on 2018-10-08 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book balances introduction to the basic concepts of the mechanical behavior of composite materials and laminated composite structures. It covers topics from micromechanics and macromechanics to lamination theory and plate bending, buckling, and vibration, clarifying the physical significance of composite materials. In addition to the materials covered in the first edition, this book includes more theory-experiment comparisons and updated information on the design of composite materials.
Download or read book Hybrid Fiber Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2020-09-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites are exceptionally versatile materials whose properties can be tuned to exhibit a variety of favorable properties such as high tensile strength and resistance against wear or chemical and thermal influences. Consequently, these materials are widely used in various industrial fields such as the aircraft, marine, and automobile industry. After an overview of the general structures and properties of hybrid fiber composites, the book focuses on the manufacturing and processing of these materials and their mechanical performance, including the elucidation of failure mechanisms. A comprehensive chapter on the modeling of hybrid fiber composites from micromechanical properties to macro-scale material behavior is followed by a review of applications of these materials in structural engineering, packaging, and the automotive and aerospace industries.
Download or read book Mechanical Behaviour of Engineering Materials written by Joachim Roesler and published by Springer Science & Business Media. This book was released on 2007-10-16 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do engineering materials deform when bearing mechanical loads? To answer this crucial question, the book bridges the gap between continuum mechanics and materials science. The different kinds of material deformation are explained in detail. The book also discusses the physical processes occurring during the deformation of all classes of engineering materials and shows how these materials can be strengthened to meet the design requirements. It provides the knowledge needed in selecting the appropriate engineering material for a certain design problem. This book is both a valuable textbook and a useful reference for graduate students and practising engineers.
Download or read book Smart Composites written by Rani Elhajjar and published by CRC Press. This book was released on 2013-12-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Composites: Mechanics and Design addresses the current progress in the mechanics and design of smart composites and multifunctional structures. Divided into three parts, it covers characterization of properties, analyses, and design of various advanced composite material systems with an emphasis on the coupled mechanical and non-mechanical behaviors. Part one includes analyses of smart materials related to electrically conductive, magnetostrictive nanocomposites and design of active fiber composites. These discussions include several techniques and challenges in manufacturing smart composites and characterizing coupled properties, as well as the analyses of composite structures at various length and time scales undergoing coupled mechanical and non-mechanical stimuli considering elastic, viscoelastic (and/or viscoplastic), fatigue, and damage behaviors. Part two is dedicated to a higher-scale analysis of smart structures with topics such as piezoelectrically actuated bistable composites, wing morphing design using macrofiber composites, and multifunctional layered composite beams. The analytical expressions for characterization of the smart structures are presented with an attention to practical application. Finally, part three presents recent advances regarding sensing and structural health monitoring with a focus on how the sensing abilities can be integrated within the material and provide continuous sensing, recognizing that multifunctional materials can be designed to both improve and enhance the health-monitoring capabilities and also enable effective nondestructive evaluation. Smart Composites: Mechanics and Design is an essential text for those interested in materials that not only possess the classical properties of stiffness and strength, but also act as actuators under a variety of external stimuli, provide passive and active response to enable structural health monitoring, facilitate advanced nondestructive testing strategies, and enable shape-changing and morphing structures.
Download or read book Thermal Mechanical Response of a Polymer Matrix Composite at Cryogenic Temperatures written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-11 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order for polymeric-matrix composites to be considered for use as structural materials in the next generation of space transportation systems, the mechanical behavior of these materials at cryogenic temperatures must be investigated. This paper presents experimental data on the residual mechanical properties of a carbon-fiber polymeric composite, IM7/PETI-5, both before and after aging. Both tension and compression modulus and strength were measured at room temperature, -196C, and -269 C on five different laminate configurations. One set of specimens was aged isothermally for 576 hours at -184 C in an unconstrained state. Another set of corresponding specimens was aged under constant uniaxial strain for 576 hours at -184 C. Based on the experimental data presented, it is shown that trends in stiffness and strength that result from changes in temperature are not always smooth and consistent. Moreover, it is shown that loading mode and direction are significant for both stiffness and strength, and aging at cryogenic temperature while under load can alter the mechanical properties of pristine, un-aged laminates made of IM7/PETI-5 material.Whitley, Karen S. and Gates, Thomas S.Langley Research CenterTEMPERATURE EFFECTS; POLYMER MATRIX COMPOSITES; CRYOGENIC TEMPERATURE; COMPRESSIVE STRENGTH; TRENDS; STIFFNESS; SPACE TRANSPORTATION SYSTEM; ROOM TEMPERATURE; LOADS (FORCES); CARBON FIBERS
Download or read book Mechanical and Physical Testing of Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites covers key aspects of fracture and failure in natural/synthetic fiber reinforced polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. Topics of interest include mechanical properties, such as tensile, flexural, compression, shear, impact, fracture toughness, low and high velocity impact, and anti-ballistic properties of natural fiber, synthetic fibers and hybrid composites materials. It also covers physical properties, such as density, water absorption, thickness swelling, and void content of composite materials fabricated from natural or synthetic materials. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. - Contains contributions from leading experts in the field - Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials - Covers experimental, analytical and numerical analysis - Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques
Download or read book Nonlinear Mechanics for Composite Heterogeneous Structures written by Georgios A. Drosopoulos and published by CRC Press. This book was released on 2022-04-26 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Mechanics for Composite Heterogeneous Structures applies both classical and multi-scale finite element analysis to the non-linear, failure response of composite structures. These traditional and modern computational approaches are holistically presented, providing insight into a range of non-linear structural analysis problems. The classical methods include geometric and material non-linearity, plasticity, damage and contact mechanics. The cutting-edge formulations include cohesive zone models, the Extended Finite Element Method (XFEM), multi-scale computational homogenization, localization of damage, neural networks and data-driven techniques. This presentation is simple but efficient, enabling the reader to understand, select and apply appropriate methods through programming code or commercial finite element software. The book is suitable for undergraduate studies as a final year textbook and for MSc and PhD studies in structural, mechanical, aerospace engineering and material science, among others. Professionals in these fields will also be strongly benefited. An accompanying website provides MATLAB codes for two-dimensional finite element problems with contact, multi-scale (FE2) and non-linear XFEM analysis, data-driven and machine learning simulations.
