Download or read book Resistance and Stability of Polymers written by Gottfried Wilhelm Ehrenstein and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-10-01 with total page 1462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability and resistance of polymeric materials determine whether they can be utilized in a given application. Authoritative and reliable material information is needed during the material selection process and this information must consider the influences of material manufacturing, compounding and stabilization, processing, part design, use and subsequent disposal/recycling. This book is based on the review of more than 1200 literature sources and represents a comprehensive overview of the current know-how regarding the stability and resistance of thermoplastics, thermosets, elastomers as well as the most commonly used reinforcements and additives. Extensive tables document material resistance to given media, facilitating appropriate material selection or stabilization for a given application. Contents Volume 1: Principles of Aging Testing Methods Stabilization Influence of Processing and Use Resistance to Thermal and Thermal-Oxidative Loads, Weathering, Chemicals, Ionizing Radiation, Microorganisms, Biological Influences, and Mechanical Loads Creep and Fatigue of Reinforced Polymers Contents Volume 2: Chemical Resistance Tables White Lists of Media Influence (According to DIBt) References Index

Download or read book Machine learning accelerated first principles predictions of the stability and mechanical properties of L12 strengthened cobalt based superalloys written by Shengkun Xi and published by OAE Publishing Inc.. This book was released on 2022-09-20 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: As promising next-generation candidates for applications in aero-engines, L12-strengthened cobalt (Co)-based superalloys have attracted extensive attention. However, the L12 strengthening phase in first-generation Co-Al-W-based superalloys is metastable, and both its solvus temperature and mechanical properties still need improvement. Therefore, it is necessary to discover new L12-strengthened Co-based superalloy systems with a stable L12 phase by exploring the effect of alloying elements on their stability. Traditional first-principles calculations are capable of providing the crystal structure and mechanical properties of the L12 phase doped by transition metals but suffer from low efficiency and relatively high computational costs. The present study combines machine learning (ML) with first-principles calculations to accelerate crystal structure and mechanical property predictions, with the latter providing both the training and validation datasets. Three ML models are established and trained to predict the occupancy of alloying elements in the supercell and the stability and mechanical properties of the L12 phase. The ML predictions are evaluated using first-principles calculations and the accompanying data are used to further refine the ML models. Our ML-accelerated first-principles calculation approach offers more efficient predictions of the crystal structure and mechanical properties for Co-V-Ta- and Co-Al-V-based systems than the traditional counterpart. This approach is applicable to expediting crystal structure and mechanical property calculations and thus the design and discovery of other advanced materials beyond Co-based superalloys.

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites IX Volume 35 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2014-11-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites XI Volume 37 Issue 2 written by Jonathan Salem and published by John Wiley & Sons. This book was released on 2017-01-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 23 papers from The American Ceramic Society's 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in Symposium 1 - Mechanical Behavior and Performance of Ceramics and Composites.

Download or read book High Entropy Alloys written by B.S. Murty and published by Elsevier. This book was released on 2019-03-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications. Provides an up-to-date, comprehensive understanding on the current status of HEAs in terms of theoretical understanding and modeling efforts Gives a complete idea on alloy design criteria of various classes of HEAs developed so far Discusses the microstructure property correlations in HEAs in terms of structural and functional properties Presents a comparison of HEAs with other multicomponent systems, like intermetallics and bulk metallic glasses

Download or read book Mechanical and thermal stability of hard nitride coatings written by Yu-Hsiang Chen and published by Linköping University Electronic Press. This book was released on 2018-05-15 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard coating’s thermal stability is essential due to the high temperature environment of high-speed cutting applications, while the phase and microstructure evolution induced by exposing the coating to high temperature affects the mechanical properties. In this thesis, the mechanical stability of arc-evaporated, hard, transition metal nitride coatings annealed at high temperature is analyzed and related to the phase and microstructure evolution. In addition to hardness, fracture toughness is evaluated by surface and cross-sectional investigations by scanning/transmission electron microscopy of damage events following mechanical tests. The crack resistance of Ti1?xAlxN with a range of Al content (x = 0.23-0.82) was studied by contact fatigue tests, where the differences in the microstructure were found to play a major role. Superior mechanical properties were found in Ti0.63Al0.37N; in the as-deposited state as a result of a favorable grain size, and after annealing at 900o C due to the microstructure formed during spinodal decomposition. The mechanical and high-temperature properties of hard coatings can be enhanced by alloying or multi-layering. Within this work, quaternary Ti-Al-X-N (X = Cr, Nb and V) alloys were studied and superior toughness was found for TiAl(Nb)N in both the as-deposited and annealed (1100? C) states. The hexagonal (h)-AlN formation in cubic (c)-TixAl0.37Cr1?0.37?xN (x = 0.03 and 0.16) was analyzed by in-situ x-ray scattering during annealing. The energy for h-AlN formation was found to be dependent on the microstructure evolution during annealing, which varies with the coating composition. High Al content h-ZrAlN/c-TiN and h-ZrAlN/c-ZrN multilayers were investigated through scratch tests followed by focused ion-beam analysis of the crack propagation. A c-Ti(Zr)N phase forms in h-ZrAlN/c-TiN multilayers at high temperatures and that contributes to enhanced hardness and fracture toughness by keeping the semi-coherent sub-interfaces. Finally, an in-situ analysis of coatings by x-ray scattering during a turning process was carried out. It demonstrates the possibility of observation of stress evolution and thermal expansion of the coatings or the work piece material during machining. This experiment provides real-time information on the coating behavior during cutting. Hårda skikts högtemperaturstabilitet är viktig på grund av den höga temperaturskikten utsätts för under skärande bearbetning, och den utveckling av faser och mikrostruktur som då sker påverkar skiktets mekaniska egenskaper. I den här avhandlingen har den mekaniska stabiliteten hos arcförångade, hårda metallnitridskikt som värmebehandlats vid höga temperaturer studerats. Förutom hårdhet har även skiktens seghet utvärderats genom yt- och tvärsnittsstudier av den sprickbildning som uppstår vid mekanisk provning med hjälp av svep- och transmissionselektronmikroskopi. Segheten hos Ti1?xAlxN skikt med varierande Al-halt (x = 0.23-0.82) studerades genom utmattningsprovning och resultaten visar att förändringar i mikrostrukturen spelar en stor roll. Ti0.63Al0.37N skikten hade överlägsna mekaniska egenskaper; på grund av en fördelaktig kornstorlek i de obehandlade skikten och efter värmebehandling som ett resultat av det spinodala sönderfall som skett. De mekaniska egenskaperna och högtemperaturegenskaperna hos hårda skikt kan förbättras genom legering eller genom multilagring. I den här avhandlingen har kvarternära Ti-Al-X-N (X = Cr, Nb eller V) skikt studerats och TiAl(Nb)N skikten hade en överlägsen seghet i både obehandlat och värmebehandlat (1100oC) tillstånd. Bildandet av h-AlN i TixAl0.37Cr1?0.37?xN (x = 0.03 and 0.16) skikt studerades genom in situ röntgenspridning under värmebehandling. Den energi som krävs för att bilda h-AlN beror av mikrostrukturutvecklingen under värmebehandling vilken i sin tur beror av skiktens kemiska sammansättning. h-ZrAlN/c-TiN och h-ZrAlN/c-ZrN multilager med hög Al-halt undersöktes genom reptester följda av tvärsnittsstudier av sprickbildningen genom en analys med en fokuserad jonstråle (FIB). En c-Ti(Zr)N fas bildas vid höga temperaturer i h-ZrAlN/c-TiN multilagren och det bidrar till förhöjd hårdhet och förbättrad seghet på grund av en bibehållen koherens mellan lagren. Slutligen har in situ röntgenspridningsstudier av ytskikt utförts vid svarvning. Studien visar på möjligheten att observera spänning och värmeutvidgning av skikten eller arbetsmaterialet under bearbetning. Experimenten ger information om skiktens beteende under bearbetning i realtid. La estabilidad térmica del recubrimiento es esencial debido a que estos recubrimientos durante su aplicación son utilizados a elevada temperatura y a alta velocidad. Durante dicho proceso, la evolución microestructural afecta a las propiedades mecánicas. En dicha tesis, la estabilidad mecánica de los recubimientos duros base nitruro producidos mediante arco y recocidos a elevada temperatura son analizados y se correlacionado con su transformación de fase. La dureza, la resistencia a la fractura son evaluados mediante la observación tanto superficial como transversal mediante microscopia electrónica de barrido. La resistencia a la propagación de grieta de Ti1?xAlxN con un contenido en Al que fluctúa entre 0.23-0.82 se estudia mediante ensayos de fatiga por contacto, donde la diferencia microstructural juega un papel importante. Las mejores propiedades mecánicas se encentran en las muestras con un 0.63 de Ti donde se ha realizado un proceso de recocido a 900o C debido a la descomposición espinoidal. Las características mecánicas y de alta temperatura de recubrimientos duros pueden ser mejoradas si tenemos un recubrimiento multicapa. Aleaciones cuaternarias de Ti-Al-X-N (X = Cr, Nb y V) son estudiada, y una mejor tenacidad de fractura se encuentra para la muestra TiAl(Nb)N sin tratamiento de recocido como recocida a 1000ºC. La formación del AlN con una estructura hexagonal en la muestra TixAl0.37Cr1?0.37?xN (x = 0.03 y 0.16) son analizadas mediante ensayos in-situ de difracción de rayos X durante el proceso de recocido. Cabe mencionar que la energía cinética para la formación de la AlN con una estructura hexagonal depende del proceso de recocido, la cual hace variar la composición química del recubrimiento. Multicapas de h (hexagonal)-ZrAlN/c (cúbica)-TiN con un elevado contenido de Al son estudiadas mediante ensayos de rayado y la generación de daño es observado mediante la técnica del haz de iones focalizados. Las formas de la fase de c-Ti(Zr)N en las multicapas de (h)-ZrAlN/c-TiN formadas a elevadas temperaturas contribuyen a mejorar la dureza y la tenacidad de fractura manteniendo la semicoherencia en las intercaras entre cada capa. Finalmente, se realiza un análisis in-situ de los diferentes recubrimientos me diante dispersión de rayos X durante un proceso de torneado. En este caso, se demuestra la posibilidad de observar la evolución de las tensiones residuales y de la expansión térmica durante el proceso de conformado. Dicho experimentos proporciona información en tiempo real sobre el comportamiento del recubrimiento en condiciones de servicio.

Download or read book China Standard GB 10357 2 1989 Test of mechanical properties of furniture Stability of chairs and stools written by www.1clicktong.com and published by Risk Management 1 Click Tong. This book was released on 2019-07-29 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies methods for determining the stability of upright chairs and stools. This standard is applicable to all types of upright chairs and stools that are used at home,hotel,restaurant etc.as well as chairs with reclining,tilting and adjustable backangle mechanisms when they are used as upright chairs. This standard does not apply to settees and other multiple seatings,nor to reclining chairs when they are reclined,chairs with tilting mechanisms when they are tilted. The calculative method in this standard is not applicable to soft armchairs or settees,upholstery items where the springing does not have a constant spring rate or chairs that undergo changes in their geometry when located,e.g.folding chairs,some metal chairs and some plastic chairs.

Download or read book Practical Guide to High Performance Engineering Plastics written by David J Kemmish and published by Smithers Rapra. This book was released on 2011-07-30 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance engineering plastics are used in a vast range of applications and environments. They are becoming increasingly important because of trends towards more reliable and higher performance machines and devices. This book gives readers a working knowledge and understanding of high performance engineering plastics. It starts with a simple, practical overview of key properties and principles. In each of the chapters there are sections on production chemistry, product forms, properties, processing and applications. There is a strong bias towards materials and concepts which are used in practice. The materials covered include high performance Polyethersulfones, Polyetherimides, Polyphthalamides, Polyphenylene Sulfide, Polyaryletherketones, Polyamideimides, Polyimides, Polybenzimidazole, Liquid Crystalline Polyesters and Perfluoropolymers. The reader will develop the ability to understand why materials are chosen for certain applications, why those materials have particular properties and how those properties can be modified. This will facilitate conversations with both materials suppliers and end users. It will help to identify the best and most cost effective solutions.

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites VI Volume 32 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Mechanical Behavior and Performance of Ceramics & Composites Symposium on topics such as processing-microstructure properties correlations; fracture mechanics, modeling and testing; tribological properties; applications; and processing.

Download or read book Mechanical and Corrosion Resistant Properties of Plastics and Elastomers written by Philip A. Schweitzer and published by CRC Press. This book was released on 2000-04-18 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the physical, mechanical and corrosion resistant properties of all the most common commercially available plastics and elastomers. It offers examples of typical applications and describes methods of joining. The physical, mechanical and corrosion resistant properties of 32 thermoplastics, 20 thermosets, and 27 elastomers are provided. There are more than 300 tables and chemical structures.

Download or read book Stability of Microstructure in Metallic Systems written by J. W. Martin and published by Cambridge University Press. This book was released on 1997-03-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this textbook, popular amongst students and faculty alike, investigates the various causes of thermodynamic instability in metallic microstructures. Materials theoretically well designed for a particular application may prove inefficient or even useless unless stable under normal working conditions. The authors examine current experimental and theoretical understanding of the kinetics behind structural change in metals. The entire text has been updated in this new edition, and a completely new chapter on highly metastable alloys has been added. The degree to which kinetic stability of the material outweighs its thermodynamic instability is very important, and dictates the useful working life of the material. If the structure is initially produced to an optimum, such changes will degrade the properties of the material. This comprehensive and well-illustrated text, accompanied by ample references, will allow final year undergraduates, graduate students and research workers to investigate in detail the stability of microstructure in metallic systems.

Download or read book Performance of Mechanical Properties of Ultrahigh Strength Ferrous Steels Related to Strain Induced Transformation written by Koh-ichi Sugimoto and published by MDPI. This book was released on 2020-11-19 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of topics concerning ultrahigh-strength ferrous steels were collected in this book. At present, most of the ferrous steels are applied to cold sheet parts. However, they may be used as the materials of hot-forged parts in the future, because of the excellent performance of the mechanical properties. It is hoped that many researchers will have an interest in the applications of the ferrous steels to the hot-forging parts.

Download or read book Phase Stability and Mechanical Properties of Ni Pt 3Al written by Janice L. Kamm and published by . This book was released on 1995 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase stability and defect structures in Ti Al N hard coatings written by Katherine M. Calamba and published by Linköping University Electronic Press. This book was released on 2019-05-27 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study highlights the role of nitrogen vacancies and defect structures in engineering hard coatings with enhanced phase stability and mechanical properties for high temperature applications. Titanium aluminum nitride (Ti,Al)N based materials in the form of thin coatings has remained as an outstanding choice for protection of metal cutting tools due to its superior oxidation resistance and high-temperature wear resistance. High-temperature spinodal decomposition of metastable (Ti,Al)N into coherent c-TiN and c-AlN nm-sized domains results in high hardness at elevated temperatures. Even higher thermal input leads to transformation of c-AlN to w-AlN, which is detrimental to the mechanical properties of the coating. One mean to delay this transformation is to introduce nitrogen vacancies. In this thesis, I show that by combining a reduction of the overall N-content of the c-(Ti,Al)Ny (y < 1) coating with a low substrate bias voltage during cathodic arc deposition an even more pronounced delay of the c-AlN to w-AlN phase transformation is achieved. Under such condition, age hardening is retained until 1100 ?C, which is the highest temperature reported for (Ti,Al)N films. During cutting operations, the wear mechanism of the cathodicarc-deposited c-(Ti0.52Al0.48)Ny with N-contents of y = 0.92, 0.87, and 0.75 films are influenced by the interplay of nitrogen vacancies, microstructure, and chemical reactions with the workpiece material. The y = 0.75 coating contains the highest number of macroparticles and has an inhomogeneous microstructure after machining, which lower its flank and crater wear resistance. Age hardening of the y = 0.92 sample causes its superior flank wear resistance while the dense structure of the y = 0.87 sample prevents chemical wear that results in excellent crater wear resistance. Heteroepitaxial c-(Ti1-x,Alx)Ny (y = 0.92, 0.79, and0.67) films were grown on MgO(001) and (111) substrates using magnetron putter deposition to examine the details of their defect structures during spinodal decomposition. At 900 ?C, the films decompose to form coherent c-AlN- and c-TiN- rich domains with elongated shape along the elastically soft <001> direction. Deformation maps show that most strains occur near the interface of the segregated domains and inside the c-TiN domains. Dislocations favorably aggregate in c-TiN rather than c-AlN because the later has stronger directionality of covalent chemical bonds. At elevated temperature, the domain size of (001) and (111)- oriented c-(Ti,Al)Ny films increases with the nitrogen content. This indicates that there is a delay in coarsening due to the presence of more N vacancies in the film. The structural and functional properties (Ti1-x,Alx)Ny are also influenced by its Al content (x). TiN and (Ti1-x,Alx)Ny (y = 1, x = 0.63 and x = 0.77) thin films were grown on MgO(111) substrates using magnetron sputtering technique. Both TiN and Ti0.27Al0.63N films are single crystals with cubic structure. (Ti0.23,Al0.77)N film has epitaxial cubic structure only in the first few atomic layers then it transitions to an epitaxial wurtzite layer, with an orientation relationship of c-(Ti0.23,Al0.77)N(111)[1-10]??w-(Ti0.23,Al0.77)N(0001)[11-20]. The w-(Ti0.23,Al0.77)N shows phase separation of coherent nm-sized domains with varying chemical composition during growth. After annealing at high temperature, the domains in w-(Ti0.23,Al0.77)N have coarsened. The domains in w-(Ti0.23,Al0.77)N are smaller compared to the domains in c-(Ti0.27,Al0.63)N film that has undergone spinodal decomposition. The results that emerged from this thesis are of great importance in the cutting tool industry and also in the microelectronics industry, because the layers examined have properties that are well suited for diffusion barriers.

Download or read book Organic Materials in Civil Engineering written by Yves Mouton and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an inventory of organic materials and products, the major components of all civil engineering projects, in terms of their scientific and technical background, including the regulations that cover their use and their predicted useful life. Such materials include: bitumen on the roads; geotextiles for retaining walls; membranes for bridges; tunnel and reservoir waterproofing; paint binders to protect metallic and concrete structures or to create road markings; injection resins; gluing products; concrete admixtures; and composite materials. The presentation is based on a physicochemical approach, which is essential if these products are to be considered as part of sustainable development: as such, those studying or working in these fields will find this an invaluable source of information.

Download or read book Alloys Based on TiNi in Pre transition Low Stability States written by Alexander I. Potekaev and published by Springer Nature. This book was released on with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Energy Environment and Sustainable Development written by C. Wang and published by IOS Press. This book was released on 2023-10-19 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subjects of green energy and sustainability have never been more important, as governments around the world wrestle with the problem of how to protect the planet from the damage being caused to the environment by climate change. This book presents the proceedings of GEESD2023, the 4th International Conference on Green Energy, Environment and Sustainable Development, held in Mianyang, China from 15-17 June 2023 and online via Zoom. The conference aims to gather innovative academicians and industry experts in the fields of green energy, environment, and sustainable development in a common forum, providing a platform for the exchange of the latest research developments in related fields. This year, the call for papers attracted more than 280 submissions, 138 of which were accepted for inclusion in this collection. The process of evaluation and peer-review took place over six months and involved more than 100 TPC members and reviewers. The book is divided into 7 sections: green energy and systems; computer methods in the environment; chemistry and the environment; ecology and the rural environment; energy, environment and economy; environment and pollution; and water and mineral resources. Papers deal with the most up-to-date findings and technologies. The book provides a valuable overview of the latest research and developments and will be of interest to all those working in the fields of green energy and sustainable development.