Download or read book Mechanical Properties on Nanometer Scale and Their Relations to Composition and Microstructure written by Maik Kunert and published by . This book was released on 2000 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.

Download or read book Processing and Properties of Structural Nanomaterials written by Leon L. Shaw and published by Wiley-TMS. This book was released on 2003-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 2003 symposium report on recent progress in the understanding of and applications related to processing and properties of structural nanomaterials, in the areas of modeling and simulation, structure and property relationships, and processing and microstructure development. Synthesis and processing, characterization of structure and mechanical properties, structure and property relationships, thermal stability, and phase transformations are some themes examined. Specific topics include grain size distribution and mechanical properties of nanostructure materials, strength design of maps for nanolayered composites, and metal-metal type alloys. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).

Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer Nature. This book was released on 2022-01-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a strong introduction to the fundamental concepts of materials science. It conveys the quintessence of this interdisciplinary field, distinguishing it from merely solid-state physics and solid-state chemistry, using metals as model systems to elucidate the relation between microstructure and materials properties. Mittemeijer's Fundamentals of Materials Science provides a consistent treatment of the subject matter with a special focus on the microstructure-property relationship. Richly illustrated and thoroughly referenced, it is the ideal adoption for an entire undergraduate, and even graduate, course of study in materials science and engineering. It delivers a solid background against which more specialized texts can be studied, covering the necessary breadth of key topics such as crystallography, structure defects, phase equilibria and transformations, diffusion and kinetics, and mechanical properties. The success of the first edition has led to this updated and extended second edition, featuring detailed discussion of electron microscopy, supermicroscopy and diffraction methods, an extended treatment of diffusion in solids, and a separate chapter on phase transformation kinetics. “In a lucid and masterly manner, the ways in which the microstructure can affect a host of basic phenomena in metals are described.... By consistently staying with the postulated topic of the microstructure - property relationship, this book occupies a singular position within the broad spectrum of comparable materials science literature .... it will also be of permanent value as a reference book for background refreshing, not least because of its unique annotated intermezzi; an ambitious, remarkable work.” G. Petzow in International Journal of Materials Research. “The biggest strength of the book is the discussion of the structure-property relationships, which the author has accomplished admirably.... In a nutshell, the book should not be looked at as a quick ‘cook book’ type text, but as a serious, critical treatise for some significant time to come.” G.S. Upadhyaya in Science of Sintering. “The role of lattice defects in deformation processes is clearly illustrated using excellent diagrams . Included are many footnotes, ‘Intermezzos’, ‘Epilogues’ and asides within the text from the author’s experience. This ..... soon becomes valued for the interesting insights into the subject and shows the human side of its history. Overall this book provides a refreshing treatment of this important subject and should prove a useful addition to the existing text books available to undergraduate and graduate students and researchers in the field of materials science.” M. Davies in Materials World.

Download or read book Microstructure And Properties Of Materials Vol 2 written by James C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.

Download or read book Micro and Nano Mechanical Testing of Materials and Devices written by Fuqian Yang and published by Springer Science & Business Media. This book was released on 2009-02-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale and nanostructured materials have exhibited different physical properties from the corresponding macroscopic coarse-grained materials due to the size confinement. As a result, there is a need for new techniques to probe the mechanical behavior of advanced materials on the small scales. Micro and Nano Mechanical Testing of Materials and Devices presents the latest advances in the techniques of mechanical testing on the micro- and nanoscales, which are necessary for characterizing the mechanical properties of low-dimensional materials and structures. Written by a group of internationally recognized authors, this book covers topics such as: Techniques for micro- and nano- mechanical characterization; Size effects in the indentation plasticity; Characterization of low-dimensional structure including nanobelts and nanotubes; Characterization of smart materials, including piezoelectric materials and shape memory alloys; Analysis and modeling of the deformation of carbon-nanotubes. Micro and Nano Mechanical Testing of Materials and Devices is a valuable resource for engineers and researchers working in the area of mechanical characterization of advanced materials.

Download or read book Nanoscale Materials and Modeling relations Among Processing Microstructure and Mechanical Properties written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology in Construction written by Zdenek Bittnar and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd International Symposium on Nanotechnology in Construction (NICOM 3) follows the highly successful NICOM 1 (Paisley, UK 2003) and NICOM 2 (Bilbao, Spain 2005) Symposia. The NICOM3 symposium was held in Prague, Czech Republic from May 31 to June 2, 2009 under the auspices of the Czech Technical University in Prague. It was a cross-disciplinary event, bringing together R&D experts and users from different fields all with interest in nanotechnology and construction. The conference was aimed at: Understanding of internal structures of existing construction materials at nano-scale Modification at nano-scale of existing construction materials. Production and properties of nanoparticulate materials, nanotubes and novel polymers. Modeling and simulation of nanostructures. Instrumentation, techniques and metrology at nano-scale. Health and safety issues and environmental impacts related to nanotechnology during research, manufacture and product use. Review of current legislation. Societal and commercial impacts of nanotechnology in construction, their predictions and analysis.

Download or read book Mechanical Properties of Nanocrystalline Materials written by James C. M. Li and published by CRC Press. This book was released on 2011-09-02 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on both understanding and development of nanocrystalline materials. The original relation that connects grain size and strength, known as the Hall-Petch relation, is studied in the nanometer grain size region. The breakdown of such a relation is a challenge. Why and how to overcome it? Is the dislocation mechanism still opera

Download or read book Mechanical Properties of Nanomaterials written by Joshua Pelleg and published by Springer Nature. This book was released on 2021-06-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the mechanical properties of nanomaterials produced by several techniques for various applications. The dislocations observed in specimens obtained in nanomaterials are discussed on the chapter about deformation process. Partial dislocations and grain boundary sliding deformation phenomena in nanomaterial specimens are also deeply discussed. Tests for tension, compression, and hardness are described. The behavior of nanomaterials is compared to macrosize specimens, and the results obtained for different fabrication methods are also compared. The special characteristics of nanomaterials are summarized at the end of the book.

Download or read book Mechanical Properties of Materials with Nanometer Scale Microstructures written by and published by . This book was released on 1991 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the past two years we have been engaged in a program of research on the mechanical properties of a variety of new materials with nanometer scale microstructures. These materials have been developed recently using vapor phase synthesis techniques and are available in the form of compositionally-modulated (multilayered) thin film materials and ultrafine-grained (nanocrystalline) solids. They have interesting microstructures and mechanical properties that may lead to new applications for these materials. In this report we give a brief summary of some of the results we have obtained to date in the course of this research. Other, more detailed, descriptions of some of this work can be found in the papers that we have published. These are listed at the end of this report along with a listing of the oral presentations we have given. We report briefly on our studies of the elastic properties of metallic multilayered thin films. Using indentation and microbeam deflection techniques, we have found that Au/Ni multilayers do not show supermodulus effects, contrary to some previous reports based on bulge test results. However, we have discovered large and significant substrate interaction stresses in these films which depend systematically on the composition modulation wavelength. We believe that these residual stresses may have led to bulge testing errors which in turn led to erroneous reports of supermodulus effects.

Download or read book Nano and Microstructural Design of Advanced Materials written by M. A. Meyers and published by Elsevier. This book was released on 2003-12-05 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied

Download or read book Nanomaterials written by K.T. Ramesh and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book grew out of my desire to understand the mechanics of nanomaterials, and to be able to rationalize in my own mind the variety of topics on which the people around me were doing research at the time. The ?eld of nanomaterials has been growing rapidly since the early 1990s. I- tially, the ?eld was populated mostly by researchers working in the ?elds of synt- sis and processing. These scientists were able to make new materials much faster than the rest of us could develop ways of looking at them (or understanding them). However, a con?uence of interests and capabilities in the 1990s led to the exp- sive growth of papers in the characterization and modeling parts of the ?eld. That con?uence came from three primary directions: the rapid growth in our ability to make nanomaterials, a relatively newfound ability to characterize the nanomate- als at the appropriate length and time scales, and the rapid growth in our ability to model nanomaterials at atomistic and molecular scales. Simultaneously, the commercial potential of nanotechnology has become app- ent to most high-technology industries, as well as to some industries that are tra- tionally not viewed as high-technology (such as textiles). Much of the rapid growth came through the inventions of physicists and chemists who were able to develop nanotechnology products (nanomaterials) through a dizzying array of routes, and who began to interface directly with biological entities at the nanometer scale. That growth continues unabated.

Download or read book Mechanical Properties of Materials from Nano to Micro Meso Scale written by Alexandra Koval?íková and published by Trans Tech Publications Ltd. This book was released on 2015-09-11 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the Local Mechanical Properties (LMP 2014,) November 12-14, 2014, High Tatras, Slovak Republic. The 63 papers are grouped as follows: Chapter 1: Research of Mechanical Properties by Nanoindentation Technique; Chapter 2: Mathematical Simulation and Modelling; Chapter 3: Films and Coatings Engineering; Chapter 4: Mechanical Properties of Biomaterials; Chapter 5: Mechanical Properties of Materials in Micro- and Meso-Scales

Download or read book Proceedings of the Thirteenth International Conference on Chemical Vapor Deposition written by Theodore M. Besmann and published by The Electrochemical Society. This book was released on 1996 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Mechanical Nanostructuring written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field