Download or read book Mechanical Properties of Reinforced Thermoplastics written by D.W. Clegg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reinforcement of materials such as mud and clay by hair, straw and vegetable fibres has been long established in man's history, enabling him to improve his buildings and extend his engineering abilities. With the advent of modern synthetic polymers it was rapidly realised that the addition of fibres, flakes and particulate materials to polymer matrices could improve mechanical properties significantly. Fibres and flakes are the most effective and have enabled several polymers with limited properties to compete with long-established metallic materials, reSUlting in cost, weight and processing economies. This is increasingly apparent in the selection of materials for aerospace and road vehicle applications as well as in a multitude of domestic products. Reinforced plastics, both thermosets and thermoplastics, are used in increasingly harsh environments involving elevated temperatures and aggressive conditions. Fibre reinforcement of thermoplastics dominates, and a pattern of increasing replacement of fibre reinforced thermosets by reinforced thermoplastics is emerging. This trend is encouraged by the development of continuous fibre reinforced grades of the newer high-temperature engineering thermoplastics such as polyether ether ketone. The first part of this book reviews the mechanical properties and theories of short fibre reinforcement. The principal reinforcements are reviewed and a separate chapter is devoted to the uses of natural fibres as reinforcements for thermoplastics. This is an interesting and commercially important area, especially for Third World countries v vi Preface where these fibres are grown but are facing severe competition from synthetic fibres in traditional applications such as ropes and matting.
Download or read book Wood Polymer Composites written by K O Niska and published by Elsevier. This book was released on 2008-05-29 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-polymer composites (WPC) are materials in which wood is impregnated with monomers that are then polymerised in the wood to tailor the material for special applications. The resulting properties of these materials, from lightness and enhanced mechanical properties to greater sustainability, has meant a growing number of applications in such areas as building, construction and automotive engineering. This important book reviews the manufacture of wood-polymer composites, how their properties can be assessed and improved and their range of uses.After an introductory chapter, the book reviews key aspects of manufacture, including raw materials, manufacturing technologies and interactions between wood and synthetic polymers. Building on this foundation, the following group of chapters discusses mechanical and other properties such as durability, creep behaviour and processing performance. The book concludes by looking at orientated wood-polymer composites, wood-polymer composite foams, at ways of assessing performance and at the range of current and future applications.With its distinguished editors and international team of contributors, Wood-polymer composites is a valuable reference for all those using and studying these important materials. - Provides a comprehensive survey of major new developments in wood-polymer composites - Reviews the key aspects of manufacture, including raw materials and manufacturing technologies - Discusses properties such as durability, creep behaviour and processing performance
Download or read book Kenaf Properties Processing and Products written by Terry Sellers and published by . This book was released on 1999 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Ceramics and Composites written by Walter Federer and published by CRC Press. This book was released on 1990-04-09 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the structural and physical properties of important classes of composite and ceramic materials of engineering importance, covering synthesis of the materials by casting and solidification routes.
Download or read book Short Fibre Reinforced Thermoplastics written by M. J. Folkes and published by Research Studies Press Limited. This book was released on 1982 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Polymer Composites written by Klaus Friedrich and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer composites in various engineering applications has become state of the art. This multi-author volume provides a useful summary of updated knowledge on polymer composites in general, practically integrating experimental studies, theoretical analyses and computational modeling at different scales, i. e. , from nano- to macroscale. Detailed consideration is given to four major areas: structure and properties of polymer nanocomposites, characterization and modeling, processing and application of macrocomposites, and mechanical performance of macrocomposites. The idea to organize this volume arose from a very impressive workshop - The First International Workshop on Polymers and Composites at IVW Kaiserslautern: Invited Humboldt-Fellows and Distinguished Scientists, which was held on May 22-24,2003 at the University of Kaiserslautern, Germany. The contributing authors were invited to incorporate updated knowledge and developments into their individual chapters within a year after the workshop, which finally led to these excellent contributions. The success of this workshop was mainly sponsored by the German Alexander von Humboldt Foundation through a Sofia Kovalevskaja Award Program, financed by the Federal Ministry for Education and Research within the "Investment in the Future Program" of the German Government. In 2001, the Humboldt Foundation launched this new award program in order to offer outstanding young researchers throughout the world an opportunity to establish their own work-groups and to develop innovative research concepts virtually in Germany. One of the editors, Z.
Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Science and Engineering of Short Fibre Reinforced Polymer Composites written by Shao-yun Fu and published by Woodhead Publishing. This book was released on 2019-08-24 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Short Fibre Reinforced Polymer Composites, Second Edition, provides the latest information on the 'short fiber reinforced composites' (SFRP) that have found extensive applications in automobiles, business machines, durable consumer items, sporting goods and electrical industries due to their low cost, easy processing and superior mechanical properties over parent polymers. This updated edition presents new developments in this field of research and includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, and both modern computational and process engineering methods. - Reviews the mechanical properties and functions of short fiber reinforced polymer composites (SFRP) - Examines recent developments in the fundamental mechanisms of SFRP's - Assesses major factors affecting mechanical performance, such as stress transfer and strength - Includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, modern computational methods, and process engineering methods
Download or read book Part 3 Mechanical and Thermomechanical Properties of Polymers written by Wolfgang Grellmann and published by Springer. This book was released on 2014-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sub volumes A of volume VIII/6 form a series of data collections and handbooks covering properties of polymer solids and polymer melts. The present volume forms the third part of it and compiles concepts and data concerning thermomechanical, mechanical and fracture-mechanical properties of pure, filled and reinforced thermoplastics, thermo sets and high-performance composites.
Download or read book Integrated Design and Manufacture Using Fibre Reinforced Polymeric Composites written by M J Owen and published by Elsevier. This book was released on 2000-06-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This very practical book is intended to show how composites are increasingly being used in real-world applications in areas where the primary material choice in the past would have been exclusively metals-based. A series of in-depth case studies examiines the design processes involved in putting together aircraft fuselages, Formua 1 cars, Transit van roofs, infrastructure systems for water treatment and storage and many other novel applications for FRCs. It shows how an awareness of engineering properties needs to be built into the design process at an early stage.It is essential for professionals in, and newcomers to, the FRP industry; executives in engineering and manufacturing who are considering using FRPs in place of more traditional materials; students in materials science and engineering.
Download or read book Reinforced Thermoplastics written by P. G. Kelleher and published by iSmithers Rapra Publishing. This book was released on 1993 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers semi and non-crystalline thermoplastics, polymer blends and various classes of reinforcing fibres, and the properties which determine their suitability for specific applications. A detailed discussion of the injection moulding of reinforced thermoplastics includes the effect of processing on fibre distribution and breakage. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.
Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.
Download or read book High Performance Thermoplastic Resins and Their Composites written by Sylvie Beland and published by William Andrew. This book was released on 2012-12-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in high performance thermoplastic resins and their composites are described in this book, and the benefits and limitations of these emerging materials are assessed for aerospace and other applications. Discussions on the performance of neat and continuous fiber reinforced thermoplastic resins in terms of their properties and environmental and chemical resistance are provided.
Download or read book Thermoplastic Polymer Composites written by Sodagudi Francis Xavier and published by John Wiley & Sons. This book was released on 2022-12-01 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: THERMOPLASTIC POLYMER COMPOSITES The monograph represents a life-long career in industry and academia and creates an exhaustive and comprehensive narrative that gives a complete understanding of important and state-of-the-art aspects of polymer composites including processing, properties, performance, applications & recyclability. Based on 40 years’ experience in both industry and academia, the author’s goal is to make a comprehensive and up-to-date account that gives a complete understanding of various aspects of polymer composites covering processing, properties, performance, applications & recyclability. Divided into 8 main chapters, the book treats thermoplastics vs. thermosets and the processing of thermoplastics; filled polymer composites; short fiber reinforced composites; long fiber reinforced composites; continuous fiber reinforced composites; nanocomposites; applications; and recycling polymer composites. Readers can have confidence that: Thermoplastic Polymer Composites (TPC) gives a comprehensive understanding of polymer composites’ processing, properties, applications, and their recyclability; Provides a complete understanding of man-made as well as natural fiber reinforced polymer (FRP) composites and explores in depth how short fiber, long fiber, and continuous fiber can transform the entire domain of composites’ processing and properties; Provides a deep understanding of nanocomposites with more than 50 examples covering both commodities as well as engineering thermoplastics. It presents conducting composites and several bio-medical applications of composites that are already passed through laboratories. Audience This unique reference book will be of great value to researchers and postgraduate students in materials science, polymer science, as well industry engineers in plastics manufacturing. Those working in product development laboratories of polymer and allied industries will also find it helpful.
