Download or read book Advanced Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured Materials written by Yong Hao Zhao and published by Trans Tech Publications Ltd. This book was released on 2011-05-17 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Mechanical Properties of Nanostructured Materials written by Abdolhossein Fereidoon and published by Xlibris Corporation. This book was released on 2016-09-26 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, with the improved abilities of computers, molecular modeling has become a powerful technique in computational chemistry with ever-increasing practical interests. At the moment, using effective algorithms along with powerful processors enables us to simulate systems, including thousands of atoms up to several microseconds. However, finding a balance between the computational costs and reliable results still remains a challenge. Two general approaches help us to reveal the behavior of these systems: quantum chemical calculations and molecular mechanics calculations. Quantum mechanics deals with physical phenomena as well as atoms behavior during chemical bonding and falls in the category of modern physics. In this book, two of the most practical quantum mechanics approaches are investigated: density functional theory (DFT) and density-functional tight-binding (DFTB).
Download or read book Handbook of Mechanical Nanostructuring written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.
Download or read book Bulk Nanostructured Materials written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing and mechanical behaviour of bulk nanostructured materials are one of the most interesting new fields of research on advanced materials systems. Many nanocrystalline materials possess very high strength with still good ductility, and exhibit high values of fatigue resistance and fracture toughness. There has been continuing interest in these nanomaterials for use in structural and biomedical applications, and this has led to a large number of research programs worldwide. This book focuses on the processing techniques, microstructures, mechanical and physical properties, and applications of bulk nanostructured materials, as well as related fundamental issues. Only since recently can such bulk nanostructured materials be produced in large bulk dimensions, which opens the door to their commercial applications.
Download or read book Mechanical Properties Derived from Nanostructuring Materials written by David F. Bahr and published by . This book was released on 2003 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials written by Jackie Ying and published by Academic Press. This book was released on 2001-12-14 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic volume of Advances in Chemical Engineering presents the latest advances in the exciting interdisciplinary field of nanostructured materials. Written by chemical engineers, chemists, physicists, materials scientists, and bioengineers, this volume focuses on the molecular engineering of materials at the nanometer scale for unique size-dependent properties. It describes a "bottom-up" approach to designing nanostructured systems for a variety of chemical, physical, and biological applications.
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by M. Nastasi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an attempt to meet the demand for new ultra-high strength materials, the processing of novel material configurations with unique microstructure is being explored in systems which are further and further from equilibrium. One such class of emerging materials is the so-called nanophased or nanostructured materials. This class of materials includes metals and alloys, ceramics, and polymers characterized by controlled ultra-fine microstructural features in the form oflayered, fibrous, or phase and grain distribution. While it is clear that these materials are in an early stage of development, there is now a sufficient body of literature to fuel discussion of how the mechanical properties and deformation behavior can be controlled through control of the microstructure. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in the field of mechanical properties and deformation behavior in materials with ultra fine microstructure, to identify opportunities and needs for further research, and to identify the potential for technological applications. The Institute was the first international scientific meeting devoted to a discussion on the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Included in these discussions were the topics of superplasticity, tribology, and the supermodulus effect. Lectures were also presented which covered a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties.
Download or read book Nano Architectured and Nanostructured Materials written by Yannick Champion and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book identifies new nanometric architectures that would be of particular interest for applications and the technological route to reach them. Nano-architectures of interest are for optical, electrical, magnetic, mechanical properties and reactivity as well as for specific applications such as catalysis and medical diagnostic and drug delivery. Nano-architectures would be metals, alloys, ceramics, semi-conductors, polymers or hybrids inorganic-polymers materials. The book places special emphasis on crucial technical aspects of the fabrication, the control and the characterisation of complex nano-architectures.
Download or read book Mechanical Behaviour of Nanostructured Materials written by D.G. Morris and published by Trans Tech Publications Ltd. This book was released on 1998-04-06 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of nanocrystalline materials has been an extremely active field during the past two decades as it promises to yield new and exciting properties, which will both test the scientific understanding of the behaviour of materials in general, and offer new scope for applications. While considerable progress has been made in basic understanding, the shift from fundamental science to technological application has been slow, especially with regard to exploitation of the mechanical behaviour of these materials.
Download or read book Bulk Nanostructured Materials with Multifunctional Properties written by I. Sabirov and published by Springer. This book was released on 2015-09-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a multifunctional approach to the design of bulk nanostructured metals through severe plastic deformation (SPD). Materials engineering has traditionally involved selecting a suitable material for a given application. However, modern engineering frequently requires materials with a set of multifunctional, often conflicting properties: Enhanced mechanical properties need to be combined with improved physical (electrical, magnetic, etc.) and/or chemical (corrosion resistance, biocompatibility) properties. So disparate materials properties need to be engineered and optimized simultaneously. These requirements have created a paradigm shift in which the classical materials selection approach is replaced by design of material microstructures to achieve certain performance requirements, subject to constraints on individual properties such as strength, conductivity, and corrosion resistance. Written by researchers at the forefront of this new materials design approach, the present volume provides a comprehensive introduction to multifunctional design of bulk nanostructured materials, with applications ranging from hydrogen storage to construction engineering.
Download or read book Fundamental Properties Of Nanostructured Materials Proceedings Of The National School Of The Condensed Matter Group written by Dino Fiorani and published by World Scientific. This book was released on 1994-10-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this school, addressed to young researchers and graduate students (physicists, chemists and engineers), was to provide the basis of fundamental properties of nanostructured materials and an introduction to more specialized and up-to-date topics. The topics were remarkably interdisciplinary, covering theory, materials preparation, structural characterization, thermodynamic aspects and mechanical, optical, electrical and magnetic properties.
Download or read book Mechanical Properties of Nanocrystalline Materials written by James C. M. Li and published by CRC Press. This book was released on 2011-09-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on both understanding and development of nanocrystalline materials. The original relation that connects grain size and strength, known as the Hall-Petch relation, is studied in the nanometer grain size region. The breakdown of such a relation is a challenge. Why and how to overcome it? Is the dislocation mechanism still operating when the grain size is very small, approaching the amorphous limit? How do we go from the microstructure information to the continuum description of the mechanical properties?
Download or read book Advanced Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured Materials written by and published by . This book was released on 2011 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bulk nanostructured (NS) materials have emerged as a new class of materials having unusual structures and properties. As a result, they have attracted considerable attention in recent years. Bulk NS materials are single or multi-phase polycrystals with a nanoscale grain size and can usually be classified into nanocrystalline (
Download or read book Processing and Properties of Structural Nanomaterials written by Leon L. Shaw and published by Wiley-TMS. This book was released on 2003-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 2003 symposium report on recent progress in the understanding of and applications related to processing and properties of structural nanomaterials, in the areas of modeling and simulation, structure and property relationships, and processing and microstructure development. Synthesis and processing, characterization of structure and mechanical properties, structure and property relationships, thermal stability, and phase transformations are some themes examined. Specific topics include grain size distribution and mechanical properties of nanostructure materials, strength design of maps for nanolayered composites, and metal-metal type alloys. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Mechanical Properties of Polymers based on Nanostructure and Morphology written by G. H. Michler and published by CRC Press. This book was released on 2016-04-19 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The improvement of strength and durability in polymers has implications relevant to industrial, medical, and household applications. Enhanced by the improved knowledge of the interactions between complex hierarchical structures and functional requirements, Mechanical Properties of Polymers Based on Nanostructure and Morphology focuses on new polyme
Download or read book Nanostructured Materials and Their Applications written by Stergios Logothetidis and published by Springer Science & Business Media. This book was released on 2012-01-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of nanostructures and nanomaterials applied in the fields of energy and organic electronics. It combines the knowledge from advanced deposition and processing methods of nanomaterials such as laser-based growth and nanopatterning and state-of-the-art characterization techniques with special emphasis on the optical, electrical, morphological, surface and mechanical properties. Furthermore it contains theoretical and experimental aspects for different types of nanomaterials such as nanoparticles, nanotubes and thin films for organic electronics applications. The international group of authors specifically chosen for their distinguished expertise belong to the academic and industrial world in order to provide a broader perspective. The authors take an interdisciplinary approach of physics, chemistry, engineering, materials science and nanotechnology. It appeals to researchers and graduate students.