Download or read book Mechanical Engineering Technologies and Applications written by Zied Driss and published by Bentham Science Publishers. This book was released on 2021-11-09 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold’s number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications Volume 3 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-12-28 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 3 includes the following topics: Numerical simulations of three-dimensional laminar mixed convection heat transfer of water-based-Al2O3 nanofluid in an open cubic cavity with a heated block. Nonlinear formulations of Element-Free Galerkin Method (EFGM) for large deformation analysis of Ogden’s hyperelastic materials, emphasizing incompressibility and mesh distortion avoidance. Development of a 3D numerical model with LS-DYNA using a coupled SPH-FEM method to simulate hydraulic behavior of a Ski-Jump Spillway with dentates, showcasing precision through validation. Exploration of enhancing the inlet system of an LPG-H2 fueled engine using a static inclined blade turbine, analyzed through Computational Fluid Dynamics (CFD) simulations. Effective utilization of Artificial Neural Networks (ANN) in heat transfer applications, addressing issues like fouling in heat exchangers, showcasing their accuracy compared to experimental data. Investigation of the impact of nitrogen concentration on the structure and properties of ZrN coatings deposited by magnetron sputtering, evaluating variations in structural and mechanical properties. Forced convection in a horizontal cylindrical pipe with pseudoplastic fluid, considering uniform constant heat flux and uniform temperature as boundary conditions. Modeling and experimental study of a water solar collector coupled to an optimized solar still, aiming to enhance freshwater production in a solar distillation system under specific climatic conditions. Exploration of the effect of film thickness on the structure and properties of Ti-N films deposited by magnetron sputtering, utilizing theoretical and experimental analysis to confirm the rock salt TiN structure. The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology. Readership Graduate students, PhD candidates and professionals seeking basic and applied information related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Materials Selection and Applications in Mechanical Engineering written by Aravamudhan Raman and published by . This book was released on 2007 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike any other text of its kind, Materials Selection and Applications in Mechanical Engineering contains complete and in-depth coverage on materials of use, their principles, processing and handling details; along with illustrative examples and sample projects. It clearly depicts the needed topics and gives adequate coverage with ample examples so that ME students can appreciate the relevance of materials to their discipline. Featuring the basic principles of materials selection for application in various engineering outcomes, the contents of this text follow those of the common first-level introductory course in materials science and engineering. Directed toward mechanical engineering, it introduces the materials commonly used in this branch, along with an exhaustive description of their properties that decide their functional characteristics and selection for use, typical problems encountered during application due to improper processing or handling of materials, non-destructive test procedures used in maintenance to detect and correct problems, and much more. What's more, numerous examples and project-type analyses to select proper materials for application are provided. With the use of this unique text, teaching a relevant second-level course in materials to ME majors has never been easier Covers all aspects of engineering materials necessary for their successful utilization in mechanical components and systems. Defines a procedure to evaluate the materials' performance efficiency in engineering applications and illustrates it with a number of examples. Includes sample project activities, along with a number of assignments for self exercise. Keeps chapters short and targeted toward specific topics for easy assimilation. Contains several unique chapters, including microprocessing, MEMS, problems encountered during use of materials in mechanical components, and NDT procedures used to detect common defects such as cracks, porosity and gas pockets, internal residual stresses, etc. Features commonly used formulae in mechanical system components in an appendix. Several tables containing material properties are included throughout the book.
Download or read book Mechanical Systems written by Seifedine Kadry and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes eleven excellent chapters that have been prepared using state-of-art methodologies by professional researchers from ten different countries. The chapters in the book comprise the following titles: System Diagnostics and Prognostics: A Review; Random Vibro-Impact Vibration in Mechanical Systems, The Machine for Cutting Cane and Other Aquatic Plants in Navigable Waterways by Agustín de Betancourt y Molina: Analysis by Computer-Aided Engineering Techniques with an Autodesk Inventor Professional; Mechanical Systems and Microfluidics: The Application of a Vision System in the Testing of Fluids Behavior; The Study of Limited Invariant Sets and Structures of Relay Stabilized Systems; Finding an Unbiased Warranty Length for a Product Under Parametric Uncertainty of Underlying Lifetime Models; Modeling of Mechanical Aspects (Static, Dynamic) Influence on the Production of Electric Fuel Cell (PEMFC) Power; Quantum Graph-Type Models of the Helmholtz Resonator and Completeness of Resonance States; Applied Research in Forensic Engineering; Energy Efficiency via a Turbulator; and A Mathematical Model of a Rocket Engine for Reliability Analysis.
Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o
Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Download or read book Mechanical Engineer s Reference Book written by Edward H. Smith and published by Butterworth-Heinemann. This book was released on 2013-09-24 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineer’s Reference Book, 12th Edition is a 19-chapter text that covers the basic principles of mechanical engineering. The first chapters discuss the principles of mechanical engineering, electrical and electronics, microprocessors, instrumentation, and control. The succeeding chapters deal with the applications of computers and computer-integrated engineering systems; the design standards; and materials’ properties and selection. Considerable chapters are devoted to other basic knowledge in mechanical engineering, including solid mechanics, tribology, power units and transmission, fuels and combustion, and alternative energy sources. The remaining chapters explore other engineering fields related to mechanical engineering, including nuclear, offshore, and plant engineering. These chapters also cover the topics of manufacturing methods, engineering mathematics, health and safety, and units of measurements. This book will be of great value to mechanical engineers.
Download or read book Materials Design and Applications III written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2021-02-17 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers selected contributions to fundamental research and application in designing and engineering materials. It focuses on mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. This includes a wide range of material classes, like lightweight metallic materials, polymers, composites, and ceramics. Advanced applications include manufacturing using the new or newer materials, testing methods, and multi-scale experimental and computational aspects.
Download or read book Mechatronic Systems Techniques and Applications written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-08-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical committee on mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the Synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design products and manufacturing process. Recent developments in computer engineering, including the exponential improvements in microprocessors, Application Specific Integrated Circuits (ASICs), along with advances in computational techniquesand advances and the product design process, has led to the field of mechatronics evolving as a highly powerful and most cost effective means for product realization. This volume focuses on mechatronics in transportation and vehicular systems and clearly reveals the effectiveness and essential significance of techniques available and with further development, the continuing essential role they will play in the future.
Download or read book Current Advances in Mechanical Engineering written by Saroj Kumar Acharya and published by Springer Nature. This book was released on 2021-03-18 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD 2020). The contents focus on latest research and current problems in various branches of mechanical engineering. Some of the topics discussed here include fracture and failure analysis, fuels and alternative fuels, combustion and IC engines, advanced manufacturing technologies, powder metallurgy and rapid prototyping, industrial engineering and automation, supply chain management, design of mechanical systems, vibrations and control engineering, automobile engineering, fluid mechanics and machines, heat transfer, composite materials, micro and nano-engineering for energy storage and conversion, and modeling and simulations. The wide range of topics presented in this book can make it useful for beginners, researchers as well as professionals in mechanical engineering.
Download or read book Diagnostic Reliablility and Control Systems written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-09-11 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical committee on mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design products and manufa
Download or read book Integrated Computer Technologies in Mechanical Engineering 2020 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2021-01-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.
Download or read book Belt Selection and Application for Engineers written by Wallace D. Erickson and published by CRC Press. This book was released on 1987-08-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Degree in a Book Electrical And Mechanical Engineering written by David Baker and published by Arcturus Publishing. This book was released on 2021-05-01 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise introduction to all the key tenets of electrical and mechanical engineering degree course, written by former NASA engineer Dr David Baker. A Degree in a Book: Electrical and Mechanical Engineering is presented in an attractive landscape format in full-color. With timelines, feature spreads and information boxes, readers will quickly get to grips with the fundamentals of electrical and mechanical engineering and their practical applications. Covering Newtonian mechanics, nuclear engineering, artificial intelligence, 3D printing and more, this essential guide brings clarity to complex ideas. David Baker delves into the history and development of this far-reaching subject as well as the challenges of the future such as environmental responsibility. Complete with a useful glossary of key terms, this holistic introduction will equip students and laypeople alike with the knowledge of an engineering graduate. ABOUT THE SERIES: Get the knowledge of a degree for the price of a book with Arcturus Publishing's A Degree in a Book series. Written by experts in their fields, these highly visual guides feature handy timelines, information boxes, feature spreads and margin annotations, allowing readers to get to grips with complex subjects in no time.
Download or read book Energy and Power Systems written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-08-08 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical committee on mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design products and manufacturing process.Due to developments in powerful computers, including microprocessors and Application Specific Integrated Circuits (ASICS), computational techniques, diverse technologies, advances in the design process of products and other factors, the field of mechatronics has evolved as a highly powerful and most cost effective means for product realization.
Download or read book Industrial Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-01-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Technical Committee on Mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the synergistic combination of precision mechanical, electronic control and systems thinking in the design products and manufacturing process Due to developments in powerful computers, including microprocessors and Application Specific Integrated Circuits (ASICS), computational techniques, diverse technologies, advances in the design process of products and other factors, the field of mechatronics has evolved as a highly powerful and most cost effective means for product realization.
