Download or read book Measurements of the Top Quark Pair Production Cross Section and Branching Ratio to a W boson and Bottom Quark Using the Semi leptonic and Dilepton Final States with the ATLAS Detector at the LHC written by Robert E. Calkins and published by . This book was released on 2012 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : In the Standard Model, the top quark plays a unique role as the heaviest known fundamental particle and as a quark that decays before it is able to hadronize. Top quarks are expected to decay to a W-boson and a b-quark nearly 100% of the time. If the branching ratio of t → Wb is lower than one, the distribution of the number of b-tagged jets will shift to lower multiplicities. A simultaneous likelihood fit to the number of b-tagged jets distributions in the lepton+jets and dilepton channels is performed on 4.7 fb−1 of data collected by the ATLAS detector to extract both the branching ratio and the tt ̄ cross section. The branching ratio of t → Wb, R, is measured to be 1.06±0.11, which is consistent with the Standard Model value. This is the first measurement of the t → Wb branching ratio performed with the ATLAS detector using both the lepton+jets and dilepton channels at the LHC. The tt ̄ cross section is measured to be [special characters omitted] pb, which agrees with NNLO predictions.
Download or read book Measurement of the Top Quark Pair Production Cross section in the Dilepton Channel Using Lepton Plus Track Selection and Identified B jets written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Using 1.0 fb^{-1} of data collected by the Collider Detector at Fermilab (CDF) from Run II of the Fermilab Tevatron, we measure the top-antitop production cross-section in events with two leptons, significant missing transverse energy, and at least jets, at least one of which is identified as a b-jet. As the Run II dataset grows, more stringent tests of Standard Model predictions for the top quark sector are becoming possible. The dilepton channel, where both top quarks decay t-> W b ->l nu b, is of particular interest due to its high purity. Use of an isolated track as the second lepton significantly increases the dilepton acceptance, at the price of some increase in background, particularly from W + jets events where one of the jets is identified as a lepton. To control the increase in background we add to the event selection the requirement that at least one of the jets be identified as a b-jet, reducing the background contribution from all sources. Assuming a branching ratio of BR(W->l nu) = 10.8% and a top mass of m_top = 175 GeV/c^{2} the measured cross-section is sigma = (10.5 +/- 1.8 stat. +/- 0.8 syst. +/- 0.6 lumi.) pb.
Download or read book Measurement of Top Quark antiquark Pair Production in Association with a W Or Z Boson in Pp Collisions at sqrt s written by and published by . This book was released on 2014 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A measurement of the cross section for the production of top quark-antiquark pairs (${\mathrm {t}}\overline{{\mathrm {t}}}$) in association with a vector boson V (W or Z) in proton-proton collisions at $\sqrt{s} = 8$ $\, \text {TeV}$ is presented. The results are based on a dataset corresponding to an integrated luminosity of 19.5 fb$^{-1}$ recorded with the CMS detector at the LHC. The measurement is performed in three leptonic (e and $\mu$) channels: a same-sign dilepton analysis targeting ${\mathrm {t}}\overline{{\mathrm {t}}} \mathrm {W} $ events, and trilepton and four-lepton analyses designed for ${\mathrm {t}}\overline{{\mathrm {t}}} {\mathrm {Z}} $ events. In the same-sign dilepton channel, the ${\mathrm {t}}\overline{{\mathrm {t}}} \mathrm {W} $ cross section is measured as $\sigma _{{\mathrm {t}}\overline{{\mathrm {t}}} \mathrm {W}} = 170 ^{+90-80}\, \text {(stat)} \pm 70\, \text {(syst)} \, \text {fb} $, corresponding to a significance of 1.6 standard deviations over the background-only hypothesis. Combining the trilepton and four-lepton channels, a direct measurement of the ${\mathrm {t}}\overline{{\mathrm {t}}} {\mathrm {Z}} $ cross section, $\sigma _{{\mathrm {t}}\overline{{\mathrm {t}}} {\mathrm {Z}}} = 200 ^{+80-70}\, \text {(stat)} ^{+40-30}\, \text {(syst)} \mathrm{fb}^{-1} $, is obtained with a significance of 3.1 standard deviations. The measured cross sections are compatible with standard model predictions within their experimental uncertainties. The inclusive ${\mathrm {t}}\overline{{\mathrm {t}}} {\mathrm {V}} $ process is observed with a significance of 3.7 standard deviations from the combination of all three leptonic channels.
Download or read book Physics at the Large Hadron Collider written by Amitava Datta and published by Springer Science & Business Media. This book was released on 2010-05-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an epoch when particle physics is awaiting a major step forward, the Large Hydron Collider (LHC) at CERN, Geneva will soon be operational. It will collide a beam of high energy protons with another similar beam circulation in the same 27 km tunnel but in the opposite direction, resulting in the production of many elementary particles some never created in the laboratory before. It is widely expected that the LHC will discover the Higgs boson, the particle which supposedly lends masses to all other fundamental particles. In addition, the question as to whether there is some new law of physics at such high energy is likely to be answered through this experiment. The present volume contains a collection of articles written by international experts, both theoreticians and experimentalists, from India and abroad, which aims to acquaint a non-specialist with some basic issues related to the LHC. At the same time, it is expected to be a useful, rudimentary companion of introductory exposition and technical expertise alike, and it is hoped to become unique in its kind. The fact that there is substantial Indian involvement in the entire LHC endeavour, at all levels including fabrication, physics analysis procedures as well as theoretical studies, is also amply brought out in the collection.
Download or read book Measurement of the Top Quark Pair Production Cross Section in Proton antiproton Collisions at a Center of Mass Energy of 1 96 TeV Hadronic Top Decays with the D0 Detector written by and published by . This book was released on 2009 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the six quarks in the standard model the top quark is by far the heaviest: 35 times more massive than its partner the bottom quark and more than 130 times heavier than the average of the other five quarks. Its correspondingly small decay width means it tends to decay before forming a bound state. Of all quarks, therefore, the top is the least affected by quark confinement, behaving almost as a free quark. Its large mass also makes the top quark a key player in the realm of the postulated Higgs boson, whose coupling strengths to particles are proportional to their masses. Precision measurements of particle masses for e.g. the top quark and the W boson can hereby provide indirect constraints on the Higgs boson mass. Since in the standard model top quarks couple almost exclusively to bottom quarks (t 2!Wb), top quark decays provide a window on the standard model through the direct measurement of the Cabibbo-Kobayashi-Maskawa quark mixing matrix element V{sub tb}. In the same way any lack of top quark decays into W bosons could imply the existence of decay channels beyond the standard model, for example charged Higgs bosons as expected in two-doublet Higgs models: t 2!Hb. Within the standard model top quark decays can be classified by the (lepton or quark) W boson decay products. Depending on the decay of each of the W bosons, t{bar t} pair decays can involve either no leptons at all, or one or two isolated leptons from direct W 2!e{bar {nu}}{sub e} and W 2![mu]{bar {nu}}{sub {mu}} decays. Cascade decays like b 2!Wc 2!e{bar {nu}}{sub e}c can lead to additional non-isolated leptons. The fully hadronic decay channel, in which both Ws decay into a quark-antiquark pair, has the largest branching fraction of all t{bar t} decay channels and is the only kinematically complete (i.e. neutrino-less) channel. It lacks, however, the clear isolated lepton signature and is therefore hard to distinguish from the multi-jet QCD background. It is important to measure the cross section (or branching fraction) in each channel independently to fully verify the standard model. Top quark pair production proceeds through the strong interaction, placing the scene for top quark physics at hadron colliders. This adds an additional challenge: the huge background from multi-jet QCD processes. At the Tevatron, for example, t{bar t} production is completely hidden in light q{bar q} pair production. The light (i.e. not bottom or top) quark pair production cross section is six orders of magnitude larger than that for t{bar t} production. Even including the full signature of hadronic t{bar t} decays, two b-jets and four additional jets, the QCD cross section for processes with similar signature is more than five times larger than for t{bar t} production. The presence of isolated leptons in the (semi)leptonic t{bar t} decay channels provides a clear characteristic to distinguish the t{bar t} signal from QCD background but introduces a multitude of W- and Z-related backgrounds.
Download or read book Top Quark Pair Production written by Anna Christine Henrichs and published by . This book was released on 2013-10-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the Top Quark Pair Production Cross Section in Pp Collisions at Sqrt s written by and published by . This book was released on 2012 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark pair production cross section is measured in dilepton events with one electron or muon, and one hadronically decaying tau lepton from the decay t anti-t to (l nu(l)) (tau nu(tau)) b anti-b, where l can be either an electron or a muon. The data sample corresponds to an integrated luminosity of 2.0 inverse femtobarns for the electron channel and 2.2 inverse femtobarns for the muon channel, collected by the CMS detector at the LHC. This is the first measurement of the t anti-t cross section explicitly including tau leptons in proton-proton collisions at sqrt(s)=7 TeV. The measured value sigma(t anti-t) = 143 +/- 14 (stat.) +/- 22 (syst.) +/- 3 (lumi.) pb is consistent with the standard model predictions.
Download or read book Measurement of the Top Quark Pair Production Cross Section and an In situ B tagging Efficiency Calibration with ATLAS in Pp Collisions at s written by Bin Guo and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a measurement of the top anti-top quark (ttbar)production cross section in the dilepton final states from proton-proton collisions at a center of mass energy at 7 TeV at the LHC. A b-tagging algorithm based on tracks displaced from the event interaction vertex is applied to identify bottom quark jets from top quark decay and reject background events. Given the relatively pure sample of bottom quark jets in ttbar dilepton final states, a new technique to measure in-situ the b-tagging efficiency is introduced that uses the distribution of the number of observed b-tagged jets. We present results with data collected at the ATLAS detector in 2010 with an integrated luminosity of 35 pb-1. The measured ttbar cross section is 176 +22/-21 (stat.) ± 20 (syst.) ± 6 (lum.) pb in the dilepton channel. We will also discuss the future prospects of this measurement.
Download or read book Top Quark Physics at Hadron Colliders written by Arnulf Quadt and published by Springer Science & Business Media. This book was released on 2007-08-16 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This will be a required acquisition text for academic libraries. More than ten years after its discovery, still relatively little is known about the top quark, the heaviest known elementary particle. This extensive survey summarizes and reviews top-quark physics based on the precision measurements at the Fermilab Tevatron Collider, as well as examining in detail the sensitivity of these experiments to new physics. Finally, the author provides an overview of top quark physics at the Large Hadron Collider.
Download or read book Measurements of the Top Quark Branching Ratios Into Channels with Leptons and Quarks with the ATLAS Detector written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precision Measurements of the Top Quark Mass and Width with the D0 Detector written by and published by . This book was released on 2010 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of the top quark in 1995 at the Fermliab Tevatron Collider, top quark properties have been measured with ever higher precision. In this article, recent measurements of the top quark mass and its width using up to 3.6 fb−1 of D0 data are summarized. Different techniques and final states have been examined and no deviations within these measurements have been observed. In addition to the direct measurements, a measurement of the top quark mass from its production cross section and a measurement of the top-antitop quark mass difference are discussed. With a mass of 173.3 ± 1.1 GeV, the top quark is the heaviest of all known fundamental particles. Due to the high mass, its Yukawa coupling is close to unity suggesting that it may play a special role in electroweak symmetry breaking. Precise measurements of both, the W boson and the top quark mass, constrain the mass of the yet unobserved Higgs boson and allow to restrict certain extensions of the Standard Model. At the Tevatron collider with a center-of-mass energy of 1.96 TeV, 85% of the top quark pairs are produced in quark-antiquark annihilation; 15% originate from gluon fusion. Top quarks are predicted to decay almost exclusively to a W boson and a bottom quark. According to the number of hadronic W decays, top events are classified into all-jets, lepton+jets and dilepton events. The lepton+jets channel is characterized by four jets, one isolated, energetic charged lepton and missing transverse energy. With 30%, the branching fraction of the lepton+jets channel is about seven times larger than the one of the dilepton channel whereas the signal to background ratio is about three times smaller. The main background in this final state comes from W +jets events. Instrumental background arises from events in which a jet is misidentified as an electron and events with heavy hadrons that decay into leptons which pass the isolation requirements. The topology of the dilepton channel is described by two jets, two isolated, energetic charged leptons and significant missing transverse energy from the undetected neutrinos. The main background are Z + jets and diboson events (WW/WZ/ZZ+jets) as well as instrumental background as characterized above. At the D0 experiment, different techniques are used to measure the top quark mass. They are summarized in the following sections together with the first measurement of the top anti-top quark mass difference and the first precise determination of the top quark width.
Download or read book Measurement of the Top Quark Pair Production Cross Section in the Dilepton Channel Using Lepton track Selection written by Robert Emil Wagner and published by . This book was released on 2008 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Large Hadron Collider written by Thomas Schörner-Sadenius and published by Springer. This book was released on 2015-05-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume summarizes and structures the multitude of results obtained at the LHC in its first running period and draws the grand picture of today’s physics at a hadron collider. Topics covered are Standard Model measurements, Higgs and top-quark physics, flavour physics, heavy-ion physics, and searches for supersymmetry and other extensions of the Standard Model. Emphasis is placed on overview and presentation of the lessons learned. Chapters on detectors and the LHC machine and a thorough outlook into the future complement the book. The individual chapters are written by teams of expert authors working at the forefront of LHC research.
Download or read book Measurement of the Top Anti top Quark Pair Production Cross Section in the Dilepton Decay Channel Using Lepton Track Selection in 7 TeV P P Collisions with L written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Higgs Boson Decays into a Pair of Bottom Quarks written by Cecilia Tosciri and published by Springer Nature. This book was released on 2021-10-22 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery in 2012 of the Higgs boson at the Large Hadron Collider (LHC) represents a milestone for the Standard Model (SM) of particle physics. Most of the SM Higgs production and decay rates have been measured at the LHC with increased precision. However, despite its experimental success, the SM is known to be only an effective manifestation of a more fundamental description of nature. The scientific research at the LHC is strongly focused on extending the SM by searching, directly or indirectly, for indications of New Physics. The extensive physics program requires increasingly advanced computational and algorithmic techniques. In the last decades, Machine Learning (ML) methods have made a prominent appearance in the field of particle physics, and promise to address many challenges faced by the LHC. This thesis presents the analysis that led to the observation of the SM Higgs boson decay into pairs of bottom quarks. The analysis exploits the production of a Higgs boson associated with a vector boson whose signatures enable efficient triggering and powerful background reduction. The main strategy to maximise the signal sensitivity is based on a multivariate approach. The analysis is performed on a dataset corresponding to a luminosity of 79.8/fb collected by the ATLAS experiment during Run-2 at a centre-of-mass energy of 13 TeV. An excess of events over the expected background is found with an observed (expected) significance of 4.9 (4.3) standard deviation. A combination with results from other \Hbb searches provides an observed (expected) significance of 5.4 (5.5). The corresponding ratio between the signal yield and the SM expectation is 1.01 +- 0.12 (stat.)+ 0.16-0.15(syst.). The 'observation' analysis was further extended to provide a finer interpretation of the V H(H → bb) signal measurement. The cross sections for the VH production times the H → bb branching ratio have been measured in exclusive regions of phase space. These measurements are used to search for possible deviations from the SM with an effective field theory approach, based on anomalous couplings of the Higgs boson. The results of the cross-section measurements, as well as the constraining of the operators that affect the couplings of the Higgs boson to the vector boson and the bottom quarks, have been documented and discussed in this thesis. This thesis also describes a novel technique for the fast simulation of the forward calorimeter response, based on similarity search methods. Such techniques constitute a branch of ML and include clustering and indexing methods that enable quick and efficient searches for vectors similar to each other. The new simulation approach provides optimal results in terms of detector resolution response and reduces the computational requirements of a standard particles simulation.
Download or read book Precision Measurements of the Top Quark Pair Production Cross Section in the Single Lepton Channel with the ATLAS Experiment written by Anna Christine Henrichs and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the Top Quark Pair Production Cross Section in the Dilepton Channel Using Lepton track Selection written by and published by . This book was released on 2008 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production cross section for t{bar t} pairs decaying into two lepton final states was measured using data from the D0 detector at Fermilab. The measurement was made using a lepton+track selection, where one lepton is fully identified and the second lepton is observed as an isolated track. This analysis is designed to complement similar studies using two fully identified leptons [1]. The cross section for the lepton+track selection was found to be [sigma] = 5.2{sub -1.4}{sup +1.6}(stat){sub -0.8}{sup +0.9}(syst) ± 0.3(lumi) pb. The combined cross section using both the lepton+track data and the data from the electron+electron, electron+muon, and muon+muon samples is: [sigma] = 6.4{sub -0.9}{sup +0.9}(stat){sub -0.7}{sup +0.8}(syst) ± 0.4(lumi) pb.
