Download or read book Measurement Technology and Intelligent Instruments IX written by Yuri V. Chugui and published by Trans Tech Publications Ltd. This book was released on 2010-05-20 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano- measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science.
Download or read book Measurement Technology and Intelligent Instruments VIII written by Wei Gao and published by Trans Tech Publications Ltd. This book was released on 2008-06-12 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Measurement, rigorously defined as ascertaining the size, amount or degree of a measurand by instrumental comparison with a standard unit or by indirect calculation based upon theory, is what makes science and technology different to imagination. Measurement is essential in industry, commerce and daily life. In the manufacturing industry in particular, measurement and instrumentation technology play increasingly important roles not only in the traditional field of manufacturing but also in the new fields of micro/nano technology and bioengineering. This book presents recent advances in the use of measurement and instrumentation in the manufacturing industry. A wide range of topics are covered including: micro/nano-metrology,precision measurements,online and in-process measurements,surface metrology,optical metrology and image processing,bio-measurement, sensor technology,intelligent measurement and instrumentation,uncertainty, traceability and calibration and signal-processing algorithms.
Download or read book Measurement Technology and Intelligent Instruments XI written by Robert Schmitt and published by Trans Tech Publications Ltd. This book was released on 2014-05-21 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2013), July 1-3, 2013, Aachen, Germany. The 60 papers are grouped as follows: Chapter 1: Metrology for SI, Chapter 2: Position & Displacement Metrology, Chapter 3: Micro- and Nanometrology, Chapter 4: Macrometrology, Chapter 5: Optical Metrology, Chapter 6: Sensors and Actuators, Chapter 7: Material Properties' Characterization, Chapter 8: Intelligent Instruments for Automation, Chapter 9: Management of Measurement Processes, Chapter 10: Calibration and Machine Tool Performance, Chapter 11: Trends in Production Technology, Chapter 12: Measurements, Modeling and Simulation in the Humanitarian Field
Download or read book Measurement Technology and Intelligent Instruments VI written by Yongsheng Gao and published by Trans Tech Publications Ltd. This book was released on 2005-10-15 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements of high precision and of high-quality components and devices in meeting the needs of modern industry and society in disciplines such as semiconductors, optics, nanotechnology, MEMS, manufacturing, biomedical and environmental engineering, make measurement technology and intelligent instruments (which sense, measure and report), more important than ever, and essential for the rapid development of information technology. Following the lead of the previous five publications (1989, 1993, 1996, 1998, 2001) in the series, Measurement Technology and Intelligent Instruments, this book presents the most recent advances in this important field. In all, 123 papers were contributed from many regions of the world; including China, Taiwan (China), Japan, Russia, Hong Kong (China), Germany, Australia, Austria, Canada, Korea, Poland, Slovakia and the UK and US.
Download or read book Measurement Technology and Intelligent Instruments XII written by Liang Chia Chen and published by Trans Tech Publications Ltd. This book was released on 2017-09-15 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano-measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science. The aim was to present the current state and evolution of measuring technology and intelligent instruments, to highlight novel technologies for science, industry and engineering, and to spot promising ways towards further development, of new technologies for measurement, at the international level. The special collection was established following the results of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015, September 22 - 25, 2015, Taipei, Taiwan).
Download or read book Advances in Machinery Materials Science and Engineering Application IX written by M. Chen and published by IOS Press. This book was released on 2023-11-14 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: New engineering materials, techniques and applications are constantly being researched and developed, and keeping up to speed with the latest advances is crucial for engineers if they are to successfully address the challenges they face in their work. This book presents the selected proceedings of MMSE2023, the 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications, jointly organized by the SAE-Supmeca, France and China University of Geosciences (Wuhan) and held on 22 and 23 July 2023 in Wuhan, China. For the past 12 years, this annual conference has collated recent advances and experiences, identified emerging trends and provided a platform for participants from academia and industry to exchange information and views, helping to address the world’s machinery and engineering challenges. The book contains 4 sections: mechanical engineering, material science and manufacturing technology; electrical engineering, automation and control; modeling, simulation and optimization techniques in engineering; and advanced engineering technologies and applications. A total of 241 submissions were received for MMSE2023, of which 151 papers were selected for the conference and for publication by means of a rigorous international peer-review process. These papers present exciting ideas and methods that will open novel research directions for different communities. Offering a current overview of the latest research and applications in machinery and materials-science engineering, the book will be of interest to all those working in the field.
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing IX written by Franco Pavese and published by World Scientific. This book was released on 2012 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed worldwide contributions. They were prompted by presentations made at the ninth AMCTM Conference held in Goteborg (Sweden) in June 2011 on the theme of advanced mathematical and computational tools in metrology and also, in the title of this book series, in testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also in keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards.
Download or read book Measurement Instrumentation and Sensors Handbook written by John G. Webster and published by CRC Press. This book was released on 2018-09-03 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences; explains sensors and the associated hardware and software; and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Second Edition: Consists of 2 volumes Features contributions from 240+ field experts Contains 53 new chapters, plus updates to all 194 existing chapters Addresses different ways of making measurements for given variables Emphasizes modern intelligent instruments and techniques, human factors, modern display methods, instrument networks, and virtual instruments Explains modern wireless techniques, sensors, measurements, and applications A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition provides readers with a greater understanding of advanced applications.
Download or read book Proceedings of the Sixth International Symposium on Measurement Technology and Intelligent Instruments written by Hong Kong University of Science and Technology. Department of Mechanical Engineering and published by . This book was released on 2003 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Instrumentation and Sensors Handbook Second Edition written by John G. Webster and published by CRC Press. This book was released on 2014-01-29 with total page 1641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.
Download or read book Measurement Technology and Intelligent Instruments VI written by Yongsheng Gao and published by Trans Tech Publications. This book was released on 2005 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements of high precision and of high-quality components and devices in meeting the needs of modern industry and society in disciplines such as semiconductors, optics, nanotechnology, MEMS, manufacturing, biomedical and environmental engineering, make measurement technology and intelligent instruments (which sense, measure and report), more important than ever, and essential for the rapid development of information technology.
Download or read book Modern Intelligent Instruments Theory and Application written by Changjian Deng and published by Bentham Science Publishers. This book was released on 2020-07-02 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: His text book serves as a guide for readers learning about the technical design of intelligent instruments, that is, instruments designed to collect information about the performance of other electronic devices and systems. The book introduces the readers to the concept of intelligent instrumentation and guides them on more advanced aspects of the subject including signal detection and analysis, data processing, performance analysis and data communication. Practical examples are also provided in the latter half of the book to blend the theoretical concepts with applied knowledge for the benefit of the reader. Key features: - Features 10 chapters covering key topics related to intelligent instrument design and operation - Provides theoretical knowledge of fundamental concepts - Provides practical examples of working instrument models (online equipment monitoring system and a mobile robot) - Provides notes on the use of packages such as MATLAB, ARGUINO and Proteus to develop intelligent instruments - Presents information in a simple, easy-to-understand format which is reader friendly - Presents handy chapter notes and references for the reader Modern Intelligent Instruments - Theory and Application is a useful textbook for engineering students and technical apprentices learning about instrumentation and PCB design and testing.
Download or read book Measurement and Instrumentation written by Alan S Morris and published by Academic Press. This book was released on 2015-08-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation: Theory and Application, Second Edition, introduces undergraduate engineering students to measurement principles and the range of sensors and instruments used for measuring physical variables. This updated edition provides new coverage of the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces, also featuring chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari. Written clearly and comprehensively, this text provides students and recently graduated engineers with the knowledge and tools to design and build measurement systems for virtually any engineering application. Provides early coverage of measurement system design to facilitate a better framework for understanding the importance of studying measurement and instrumentation Covers the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces Includes significant material on data acquisition and signal processing with LabVIEW Extensive coverage of measurement uncertainty aids students’ ability to determine the accuracy of instruments and measurement systems
Download or read book Second International Symposium on Measurement Technology and Intelligent Instruments written by Zhu Li and published by . This book was released on 1993 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Technology and Intelligent Instruments XII written by Liang-Chia Chen and published by . This book was released on 2017-01-10 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano-measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science. The aim was to present the current state and evolution of measuring technology and intelligent instruments, to highlight novel technologies for science, industry and engineering, and to spot promising ways towards further development, of new technologies for measurement, at the international level. The special collection was established following the results of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015, September 22 - 25, 2015, Taipei, Taiwan).
Download or read book Measurement Technology and Intelligent Instruments XII written by Liang-Chia Chen and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano-measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science. The aim was to present the current state and evolution of measuring technology and intelligent instruments, to highlight novel technologies for science, industry and engineering, and to spot promising ways towards further development, of new technologies for measurement, at the international level. The special collection was established following the results of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015, September 22 - 25, 2015, Taipei, Taiwan).
Download or read book Advanced Semiconductor on Insulator Technology and Related Physics 15 written by Yasuhisa Omura and published by The Electrochemical Society. This book was released on 2011-04 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the continuation of the long running ¿Silicon-on-Insulator Technology and Devices¿ symposium. The issue of ECS Transactions covers recent significant advances in SOI technologies, SOI-based nanoelectronics and innovative applications including scientific interests. It will be of interest to materials and device scientists, as well as to process and applications oriented engineers and scientists.
