Download or read book Measurement of the T channel Single Top Quark Production Cross Section with the ATLAS Detector at S written by Philipp Sturm and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the T channel Single Top Quark Production Cross Section with the ATLAS Detector at S written by Philipp Sturm and published by . This book was released on 2012 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the T channel Single top quark Production Cross Section and of the written by and published by . This book was released on 2014 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements are presented of the t-channel single-top-quark production cross section in proton-proton collisions at √s = 8 TeV. The results are based on a data sample corresponding to an integrated luminosity of 19.7 fb−1 recorded with the CMS detector at the LHC. The cross section is measured inclusively, as well as separately for top (t) and antitop $ \left(\overline{\mathrm{t}}\right) $, in final states with a muon or an electron. The measured inclusive t-channel cross section is?t-ch. = 83.6 ± 2.3 (stat.) ± 7.4 (syst.) pb. The single t and $ \overline{\mathrm{t}} $ cross sections are measured to be?t-ch.(t) = 53.8 ± 1.5 (stat.) ± 4.4 (syst.) pb and?$_{t-ch.}$ $ \left(\overline{t}\right) $ = 27.6 ± 1.3 (stat.) ± 3.7 (syst.) pb, respectively. The measured ratio of cross sections is Rt-ch. =?t-ch.(t)/?t-ch. $ \left(\overline{\mathrm{t}}\right) $ = 1.95 ± 0.10 (stat.) ± 0.19 (syst.), in agreement with the standard model prediction. The modulus of the Cabibbo-Kobayashi-Maskawa matrix element Vtb is extracted and, in combination with a previous CMS result at √s = 7 TeV, a value.
Download or read book Measurement of the Fiducial and Total Single Top Quark T Channel Production Cross Sections with the ATLAS Detector at s written by Phillipp Tepel and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Top Quark Pair Production written by Anna Christine Henrichs and published by Springer Science & Business Media. This book was released on 2013-10-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before any kind of new physics discovery could be made at the LHC, a precise understanding and measurement of the Standard Model of particle physics' processes was necessary. The book provides an introduction to top quark production in the context of the Standard Model and presents two such precise measurements of the production of top quark pairs in proton-proton collisions at a center-of-mass energy of 7 TeV that were observed with the ATLAS Experiment at the LHC. The presented measurements focus on events with one charged lepton, missing transverse energy and jets. Using novel and advanced analysis techniques as well as a good understanding of the detector, they constitute the most precise measurements of the quantity at that time.
Download or read book Measurement of the T channel Single Top Quark Production Cross Section written by and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The D0 collaboration reports direct evidence for electroweak production of single top quarks through the t-channel exchange of a virtual W boson. This is the first analysis to isolate an individual single top quark production channel. We select events containing an isolated electron or muon, missing transverse energy, and two, three or four jets from 2.3 fb−1 of p{bar p} collisions at the Fermilab Tevatron Collider. One or two of the jets are identified as containing a b hadron. We combine three multivariate techniques optimized for the t-channel process to measure the t- and s-channel cross sections simultaneously. We measure cross sections of 3.14{sub -0.80}{sup +0.94} pb for the t-channel and 1.05 ± 0.81 pb for the s-channel. The measured t-channel result is found to have a significance of 4.8 standard deviations and is consistent with the standard model prediction.
Download or read book Measurement of the T Channel Single Top Quark Production Cross Section in Pp Collisions at Sqrt s written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroweak production of the top quark is measured in pp collisions at sqrt(s) = 7 TeV, using a dataset collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 36 inverse picobarns. With an event selection optimized for t-channel production, two complementary analyses are performed. The first one exploits the special angular properties of the signal, together with background estimates from data. The second approach uses a multivariate analysis technique to probe the compatibility with signal topology expected from electroweak top quark production. The combined measurement of the cross section is 83.6 +/- 29.8 (stat.+syst.) +/- 3.3 (lumi.) pb, consistent with the standard model expectation.
Download or read book Cross Section Measurement of T channel Single Top Quark Production in Pp Collisions at sqrt s written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cross section for the production of single top quarks in the $t$ channel is measured in proton-proton collisions at 13 TeV with the CMS detector at the LHC. The analyzed data correspond to an integrated luminosity of 2.3 fb$^{-1}$. The event selection requires one muon and two jets where one of the jets is identified as originating from a bottom quark. Several kinematic variables are then combined into a multivariate discriminator to distinguish signal from background events. A fit to the distribution of the discriminating variable yields a total cross section of 232 $\pm$ 13 (stat) $\pm$ 28 (syst) pb and a ratio of top quark and top antiquark production of $R_{t\textrm{-ch.}}= $ 1.81 $\pm$ 0.18 (stat) $\pm$ 0.15 (syst). From the total cross section the absolute value of the CKM matrix element $V_{\mathrm{tb}}$ is calculated to be 1.03 $\pm$ 0.07 (exp) $\pm$ 0.02 (theo). All results are in agreement with the standard model predictions.
Download or read book Measurements of Differential T channel Single Top quark Production Cross sections in Proton proton Collisions at a Centre of mass Energy of 8 TeV with the ATLAS Detector written by Pienpen Seema-Mergelmeyer and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the Single Top Quark Production Cross Section at sqrt s written by and published by . This book was released on 2011 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the standard model top quarks are predicted to be most often produced in pairs via the strong interaction. However they can also be produced singly through the weak interation. This is a rarer process with many experimental challenges. It is interesting because it provides a new window to search for evidence of physics beyond the standard model picture, such as a fourth generation of quarks or to search for insight into the Higgs Mechanism. Single top production also provides a direct way to calculate the CKM matrix element Vtb. This thesis presents new measurements for single top quark production in the s+t, s and t channels using 5.4 fb-1 of data collected at the DØ detector at Fermilab in Batavia, IL. The analysis was performed using Boosted decision trees to separate signal from background and Bayesian statistcs to calculate all the cross sections.
Download or read book Measurement of the Single Top Quark Production Cross Section and written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated measurement of the single top quark production cross section is presented using the full data set collected by the Collider Detector at Fermilab (CDF), corresponding to 9.5 fb-1 of integrated luminosity from proton-antiproton collisions at 1.96 TeV center-of-mass energy. The events selected contain an imbalance in the total transverse momentum, jets identified as containing b quarks, and no identified leptons. The sum of the s- and t-channel single top quark cross sections is measured to be 3.53-1.16+1.25 pb and a lower limit on the magnitude of the top-to-bottom quark coupling,
Download or read book Spin Correlations in tt Events from pp Collisions written by Boris Lemmer and published by Springer. This book was released on 2015-06-24 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces readers to the Standard Model, the top quark and its properties, before explaining the concept of spin correlation measurement. The first measurement of top quark spin correlations at the LHC in the lepton+jets decay channel is presented. As the heaviest elementary particle, the top quark plays an essential role in the Standard Model of elementary particle physics. In the case of top quarks being produced in pairs at hadron colliders, the Standard Model predicts their spins to be correlated. The degree of correlation depends on both the production mechanism and properties of the top quark. Any deviation from the Standard Model prediction can be an indicator for new physics phenomena. The thesis employs an advanced top quark reconstruction algorithm including dedicated identification of the up- and down-type quarks from the W boson decay.
Download or read book Combined Measurement of Single Top quark Production in the S and T channel with the ATLAS Detector and Effective Field Theory Interpretation written by Sören Stamm and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Third generation SUSY and t t Z production written by Josh McFayden and published by Springer. This book was released on 2014-06-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes searches for new particles predicted by the super symmetry (SUSY) theory, a theory extending beyond the current Standard Model of particle physics, using the ATLAS detector at the CERN Large Hadron Collider. The thesis focuses on searches for stop and sbottom squarks, the SUSY partners of the top and bottom quarks, which are expected to be lighter than the partners of the first and second generation quarks and therefore good candidates for the first evidence of SUSY. It describes novel techniques for estimating and rejecting the Standard-Model backgrounds to searches for these particles. It also includes an independent analysis seeking to constrain the Standard Model ttZ background process, which also represents the first ATLAS search for this rare process at the LHC. The stop squark analysis described, with substantial leading contributions from the author, is the first search for these particles at the LHC to use the jets plus missing transverse energy plus 0-lepton signature and provides the world's best limits on the stop mass for light neutralino LSPs. All in all, the thesis describes three different world-leading analyses in both Standard Model and SUSY physics and therefore represents a major contribution to the field.
Download or read book Higher Order QCD Corrections to Single Top Quark Production written by Mohammad Assadsolimani and published by disserta Verlag. This book was released on 2014-08 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is known that the LHC has a considerable discovery potential because of its large centre-of-mass energy (vs =14 TeV) and the high design luminosity. In addition, the two experiments ATLAS and CMS perform precision measurements for numerous models in physics. The increasing experimental precision demands an even higher level of accuracy on the theoretical side. For a more precise prediction of outcomes, one has to consider the corrections obtained typically from Quantum Chromodynamics (QCD). The calculation of these corrections in the high energy regime is described by perturbation theory. In the present study, multi-loop calculations in QCD, including in particular two-loop corrections for single top quark production, are considered. There are several phenomenological motivations to study single top quark production: Firstly, the process is sensitive to the electroweak Wtb-vertex; moreover, non-standard couplings can hint at physics beyond the Standard Model. Secondly, the t-channel cross section measurement provides information on the b-quark Parton Distribution Functions (PDF). Finally, single top quark production enables us to directly measure the Cabibbo-Kobayashi-Maskawa(CKM) matrix element Vtb. The next-to-next-to-leading-order (NNLO) calculation of the single top quark production has many building blocks. In this study, two blocks will be presented: one-loop corrections squared and two-loop corrections interfered with Born. Initially, the one-loop squared contribution at NNLO for single top quark production will be calculated. Before we begin with the calculation of the two-loop corrections to single top quark production, we calculate the QCD form factors of heavy quarks at NNLO, along with the axial vector coupling as a first independent check. A comparison with the relevant literature suggests that this approach is in line with generally accepted procedure. This consistency check provides a proof of the validity of our setup. In the next step, the two-loop corrections to single top quark production will be calculated. After reducing all occurring tensor integrals to scalar integrals, we apply the integration by parts method (IBP) to find the master integrals. This step is a major challenge compared to all similar calculations because of the number of variables in the problem (two Mandelstam variables s and t, the dimension d and the mass of the top quark mt as well as the mass of the W boson mw). Finally, the calculation of the three kinds of topologies – vertex corrections, double boxes and non-planar double boxes – in the two-loop contribution at NNLO calculation will be presented.
Download or read book Measurement of the Polarisation of Single Top Quarks and Antiquarks Produced in the T channel at square Root s written by [Study Group] ATLAS Collaboration CERN and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: A simultaneous measurement of the three components of the top-quark and top-antiquark polarisation vectors in t-channel single-top-quark production is presented. This analysis is based on data from proton-proton collisions at a centre-of-mass energy of 13 TeV corresponding to an integrated luminosity of 139 fb−1, collected with the ATLAS detector at the LHC. Selected events contain exactly one isolated electron or muon, large missing transverse momentum and exactly two jets, one being b-tagged. Stringent selection requirements are applied to discriminate t-channel single-top-quark events from the background contributions. The top-quark and top-antiquark polarisation vectors are measured from the distributions of the direction cosines of the charged-lepton momentum in the top-quark rest frame. The three components of the polarisation vector for the selected top-quark event sample are Px′ = 0.01 ± 0.18, Py′ = −0.029 ± 0.027, Pz′ = 0.91 ± 0.10 and for the top-antiquark event sample they are Px′ = −0.02 ± 0.20, Py′ = −0.007 ± 0.051, Pz′ = 0.79 ± 0.16. Normalised differential cross-sections corrected to a fiducial region at the stable-particle level are presented as a function of the charged-lepton angles for top-quark and top-antiquark events inclusively and separately. These measurements are in agreement with Standard Model predictions. The angular differential cross-sections are used to derive bounds on the complex Wilson coefficient of the dimension-six OtW operator in the framework of an effective field theory. The obtained bounds are CtW ∈ [−0.9, 1.4] and CitW ∈ [−0.8, 0.2], both at 95% confidence level
Download or read book Measurement of the T channel Single top quark Production Cross Section and of the mid V tb mid CKM Matrix Element in Pp Collisions at sqrt s written by and published by . This book was released on 2014 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt:
