Download or read book Measurement of Aggregate Texture and Its Influence on Hot Mix Asphalt HMA Permanent Deformation written by T. Fletcher and published by . This book was released on 2002 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregate shape has a significant effect on the performance of asphalt mixes. Designing well-performing asphalt pavements requires developing methods to quantify rapidly and accurately the different aggregate shape properties, and most importantly, relate these properties to performance. Aggregate texture has been identified in several studies to be the shape property that has the most significant influence on asphalt mix performance. This study presents a new procedure for measuring aggregate texture using image analysis techniques. The main advantages of this new procedure are the ability to capture the different sizes of texture elements, to separate the true texture from the color variations on the aggregate surface, and to characterize both fine and coarse aggregates. The procedure is used to measure texture for a wide range of fine and coarse aggregates, and the results are compared with the laboratory performance of asphalt mixes. The analysis shows that the procedure yields detailed information on aggregate texture in a short time. The texture measurements have very good correlation with the resistance of asphalt mixes to permanent deformation measured in the laboratory using different wheel tracking devices.
Download or read book Influence of Aggregate Gradation and Particle Shape texture on Permanent Deformation of Hot Mix Asphalt Pavements written by Randolph C. Ahlrich and published by . This book was released on 1995 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aggregate Contribution to Hot Mix Asphalt HMA Performance written by Thomas D. White and published by ASTM International. This book was released on 2001 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 13 papers from the December 2000 conference in Orlando, Florida, this book covers the use of the PURWheel laboratory tracking device, the Asphalt Pavement Analyzer, the identification of aggregate role, the evaluation of sensitivity, fine aggregate angularity, guidelines for the selection
Download or read book Influence of Aggregate Gradation and Particle Shape texture on Permanent Deformation of Hot Mix Asphalt Pavements written by Randy C. Ahlrich and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aggregate Contribution to Hot Mix Asphalt HMA Performance written by and published by ASTM International. This book was released on with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Correlating Permanent Deformation Characteristics of Hot Mix Asphalt with Aggregate Geometric Irregularities written by C-Y Kuo and published by . This book was released on 2002 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regression analyses were performed to study the correlation between the permanent deformation characteristics of hot mix asphalt (HMA) mixtures and their aggregate geometric irregularities. Permanent deformation of HMA mixtures was characterized by permanent strain, creep modulus, and slope of the creep curve from unconfined repeated load deformation tests. The fine aggregate angularity (FAA) test was used to characterize fine aggregates while coarse aggregates were characterized with either the particle index (PI) test, the modified National Aggregate Association flow test (modified NAA), or image analysis. Regression analyses indicate strong correlation between the permanent deformation characteristics of HMA mixtures and the aggregate geometric irregularities. Use of imaging indices for characterizing coarse aggregates gives better coefficients of determination than do other coarse aggregate characteristics such as PI and modified NAA. The imaging indices have major potential in evaluating aggregate geometric irregularities for engineering analysis.
Download or read book Recent Advances in Traffic Engineering written by Ashish Dhamaniya and published by Springer Nature. This book was released on 2023-10-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the National Conference on Recent Advances in Traffic Engineering (RATE 2022). The contents includes in-depth insights into the domain of traffic engineering and planning and presents the latest advancements by focusing on traffic engineering, traffic flow, road safety, advanced techniques for transportation surveys, and data collection. It covers topics including travel demand modeling and transportation planning issues. The contents of this book offer up-to-date and practical knowledge on different aspects of traffic engineering. It will be useful for researchers as well as practitioners.
Download or read book Investigation of Aggregate Shape Effects on Hot Mix Performance Using an Image Analysis Approach written by E. Tutumluer and published by . This book was released on 2004 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanistic Model to Predict the Impact of the Aggregate Matrix on the Permanent Deformation of Asphalt Mixtures written by Samer Hassan Dessouky and published by . This book was released on 2005 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot mix asphalt (HMA) is a granular composite material stabilized by the presence of asphalt binder. The behavior of HMA is highly influenced by the microstructure distribution in terms of the different aggregate particles present in the mix, the directional distribution of aggregates, the distribution of voids, and the nucleation and propagation of cracks. Conventional continuum modeling of HMA lacks the ability to explicitly account for the effect of aggregate microstructure distribution features. This report presents the development of elastic and visco-plastic models that account for important aspects of the aggregate and microstructure distribution in modeling the macroscopic behavior of HMA. The objective of Project 0-1707 is to develop tools by which engineers can judge the impact of the aggregate on the performance of HMA based on simple and repeatable tests. Of greatest concern in Project 0-1707 is the ability of the HMA to resist permanent deformation or to rut, which leads to safety concerns, especially under wet surface conditions. In this report, the research team develops an approach is developed to introduce a length scale to the elasticity constitutive relationship in order to capture the influence of aggregate particle sizes on HMA response. A finite element (FE) analysis is used to analyze the microstructure response and predict the macroscopic properties of HMA. Each point in the microstructure is assigned effective local properties that are calculated using an analytical micromechanical model that captures the influence of the number of particles on the microscopic response of the HMA. The moving window technique and autocorrelation function are used to determine the microstructure characteristic length scales that are used in strain gradient elasticity. A number of asphalt mixes with different aggregate types and size distributions are analyzed . An elasto-visco-plastic continuum model is developed to predict HMA response and performance. The model incorporates a Drucker-Prager yield surface that is modified to capture the influence of stress path direction on the material response. Parameters that reflect the directional distribution of aggregates and damage density in the microstructure are included in the model. The elasto-visco-plastic model is converted into a numerical formulation and is implemented in FE analysis using a user-defined material subroutine (UMAT). A fully implicit algorithm in time-step control is used to enhance the efficiency of the FE analysis. The FE model used in this project simulates experimental data and pavement section.
Download or read book Performance Tests for Hot Mix Asphalt HMA Including Fundamental and Empirical Procedures written by Louay Nadhim Mohammad and published by ASTM International. This book was released on 2006 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.
Download or read book Using High speed Texture Measurements to Improve the Uniformity of Hot mix Asphalt written by Kevin K. McGhee and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study introduces Virginia's efforts to apply high-speed texture measurement as a tool to improve the uniformity of hot-mix asphalt (HMA) pavements. Three approaches for detecting and quantifying HMA segregation through measuring pavement surface macrotexture were evaluated: (1) applying the methods proposed in NCHRP Report 441, which build on the ability to predict the expected "non-segregated" macrotexture; (2) using acceptance bands for texture similar to those used for HMA density; and (3) considering the standard deviation of the macrotexture as a measure of construction uniformity. Based on the findings from a series of field tests, the researchers concluded that macrotexture measurement holds great promise as a tool to detect and quantify segregation for quality assurance purposes. None of the available equations for predicting non-segregated macrotexture (the approach in NCHRP Report 441) was found to work for all the construction projects evaluated. Additional information is necessary to establish target macrotexture levels. The acceptance bands approach produced reasonable results in most of the field-verification experiments, but it was significantly influenced by the actual variability within the section. An approach that used target levels of standard deviations was selected for further testing and implementation on a pilot basis
Download or read book Influence of Coarse Aggregate Size Shape and Surface Texture on Rutting of Hot Mix Asphalt Concrete written by Mohan Yeggoni and published by . This book was released on 1993 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aggregate Tests for Hot mix Asphalt Mixtures Used in Pavements written by Thomas D. White and published by Transportation Research Board. This book was released on 2006 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and application -- Conclusions and suggested research -- References -- Abbreviations used without definitions in TRB publications.
Download or read book Laboratory based Unified Permanent Deformation Model for Hot Mix Asphalt Mixtures written by Elie Y. Hajj and published by . This book was released on 2007 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventionally, the resistance of hot-mixed asphalt (HMA) mixtures to permanent deformation is measured by repeated load triaxial (RLT) or repeated shear at constant height (RSCH) testing. The data from these tests have been treated as independent datasets in the prediction of rutting potential in HMA layers. This paper presents a unified permanent deformation model using response measurements made from both tests. The new model quantifies the accumulated permanent shear strain as a function of number of load cycles and factor of safety (FOS). The factor of safety is defined in the q-p space and is evaluated based on the applied stresses and triaxial compression strength properties (cohesion and angle of internal friction). For the specific mixture used in this study, a good correlation was found between the cumulative permanent shear strain and the FOS level, irrespective of the stress conditions and the type of test used.
Download or read book Aggregate Tests Related to Asphalt Concrete Performance in Pavements written by Prithvi S. Kandhal and published by Transportation Research Board. This book was released on 1998 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Functional Pavements written by Yuqing Zhang and published by CRC Press. This book was released on 2023-11-15 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Functional Pavements is a collection of papers presented at the 7th Chinese-European Workshop (CEW) on Functional Pavement (Birmingham, UK, 2-4 July 2023). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and covers analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: Green pavements for circular and low-carbon economy Intelligent pavements for future and smart cities Durable pavements for long-life infrastructures Safe pavements for user-friendly build environments Advances in Functional Pavements aims at contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals, academics and practitioners in pavement engineering and related disciplines as it should assist them in providing improved road pavement infrastructure to their stakeholders.
