Download or read book PC Based Instrumentation and Control written by Michael H. Tooley and published by Routledge. This book was released on 2005 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Save money and increase efficiency by using a standard PC platform to solve a wide variety of control, instrumentation and measurement problems . Designed for practicing engineers and technicians, this book is also ideal for educational courses in control, instrumentation and measurement . A companion website provides downloadable executables, source code, links to manufacturers and suppliers, and additional reference material PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the most popular computer languages. Numerous sample applications, complete with examples of working circuits and representative software, make this a practical, hands-on guide to implementing a vast range of PC-based testing, measurement, and control systems. Advice is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, an expanded chapter on reliability and fault-finding, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book Computers and Instrumentation written by Alan Carrick and published by . This book was released on 1979 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Computers and Control written by and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computers in Systems for Measurement and Control written by Dag Björklöf and published by . This book was released on 1986 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation Measurement Circuits and Systems written by Tianbiao Zhang and published by Springer Science & Business Media. This book was released on 2012-03-09 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the book and also find it stimulating in the process.
Download or read book Computer automated Measurement and Control based Workstation for Microseismic and Acoustic Emission Research written by Frances M. Boler and published by . This book was released on 1990 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PC Interfacing and Data Acquisition written by Kevin James and published by Elsevier. This book was released on 2000-07-17 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to programming for data acquisition and measurement - must-have info in just the right amount of depth for engineers who are not programming specialists. This book offers a complete guide to the programming and interfacing techniques involved in data collection and the subsequent measurement and control systems using an IBM compatible PC. It is an essential guide for electronic engineers and technicians involved in measurement and instrumentation, DA&C programmers and students aiming to gain a working knowledge of the industrial applications of computer interfacing. A basic working knowledge of programming in a high-level language is assumed, but analytical mathematics is kept to a minimum. Sample listings are given in C and can be downloaded from the Newnes website. - Practical guidance on PC-based acquisition - Written for electronic engineers and software engineers in industry, not academics or computer scientists - A textbook with strong foundations in industry
Download or read book Measurement and Control Basics written by Thomas A. Hughes and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the basic principles of process control and instrumentation, for engineers, technicians, management, and sales personnel new to the subject. After a review of relevant mathematics, chapters cover electrical, electronic, and digital fundamentals, process control computers
Download or read book Measurement Computers and Control written by and published by . This book was released on 1979 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation for Process Measurement and Control Third Editon written by Norman A. Anderson and published by CRC Press. This book was released on 1997-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perennially bestselling third edition of Norman A. Anderson's Instrumentation for Process Measurement and Control provides an outstanding and practical reference for both students and practitioners. It introduces the fields of process measurement and feedback control and bridges the gap between basic technology and more sophisticated systems. Keeping mathematics to a minimum, the material meets the needs of the instrumentation engineer or technician who must learn how equipment operates. I t covers pneumatic and electronic control systems, actuators and valves, control loop adjustment, combination control systems, and process computers and simulation
Download or read book An Introduction to Software Physics written by Kenneth W. Kolence and published by McGraw-Hill Companies. This book was released on 1985 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: First full exposition of the theory of software physics.
Download or read book Measurement and Control with a Small Computer System written by Åke Westh and published by . This book was released on 1981 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linux PC based Measurement Electronics written by Yury Magda and published by A PRECISER. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a highly-practical guide for Hobbyists, Engineers and Scientists wishing to build measurement and control systems to be controlled by a local or remote Personal Computer running the Linux operating system. Both hardware and software aspects of designing typical embedded systems are covered in detail with schematics, code listings and full descriptions. Numerous examples have been designed to show clearly how straightforward it can be to create the interfaces between digital and analogue electronics, with programming techniques for creating control software for both local and remote systems. Hardware developers will appreciate the variety of circuits, including a novel, low cost modulated wireless link and will discover how using Matlab(r) overcomes the need for specialist programming skills. Software developers will appreciate how a better understanding of circuits plus the freedom offered by Linux to directly control at the register level enables them to optimise related programs. There is no need to buy special equipment or expensive software tools in order to create embedded projects covered in this book.You can build such quality systems quickly using popular low-cost electronic components and free distributed or low-cost software tools. Some knowledge of basic electronics plus the very basics of C programming only is required. Many projects in this book are developed using Matlab(r) being a very popular worldwide computational tool for research in engineering and science. The book provides a detailed description of how to combine the power of Matlab(r) with practical electronics. With an emphasis on learning by doing, readers are encouraged by examples to program with ease; the book provides clear guidelines as to the appropriate programming techniques on the fly. Complete and well-documented source code is provided for all projects. If you want to learn how to quickly build Linux-based applications able to collect, process and display data on a PC from various analogue and digital sensors, how to control circuitry attached to a computer, then even how to pass data via a network or control your embedded system wirelessly and more -- then this is the book for you
Download or read book PC Based Instrumentation and Control written by Mike Tooley and published by Routledge. This book was released on 2013-06-17 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book Measurement Systems and Sensors Second Edition written by Waldemar Nawrocki and published by Artech House. This book was released on 2016-01-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated and expanded second edition is an authoritative resource on industrial measurement systems and sensors, with particular attention given to temperature, stress, pressure, acceleration, and liquid flow sensors. This edition includes new and expanded chapters on wireless measuring systems and measurement control and diagnostics systems in cars. Moreover, the book introduces new, cost-effective measurement technology utilizing www servers and LAN computer networks - a topic not covered in any other resource. Coverage of updated wireless measurement systems and wireless GSM/LTE interfacing make this book unique, providing in-depth, practical knowledge. Professionals learn how to connect an instrument to a computer or tablet while reducing the time for collecting and processing measurement data. This hands-on reference presents digital temperature sensors, demonstrating how to design a monitoring system with multipoint measurements. From computer-based measuring systems, electrical thermometers and pressure sensors, to conditioners, crate measuring systems, and virtual instruments, this comprehensive title offers engineers the details they need for their work in the field.
Download or read book An Introduction to Control and Measurement with Microcomputers written by Robert Louis Dalglish and published by CUP Archive. This book was released on 1987-11-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to microcomputers & their applications to control & data acquisition reveals how computer systems can be interfaced to communication systems.
Download or read book Intro to Computer Based Control Systems written by and published by Bookboon. This book was released on with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
