Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Download or read book Dynamics and Control of Wastewater Systems Second Edition written by Michae Barnett and published by CRC Press. This book was released on 1998-07-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.

Download or read book Activated Sludge Modelling Processes in Theory and Practice written by M. Henze and published by IWA Publishing (International Water Assoc). This book was released on 2002-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of models in activated sludge design and operation is increasing, with a similar trend seen in education. Starting with the original IAWPRC Activated Sludge Model no 1 (ASM1) and the subsequent ASM2 and ASM2D, the first generation of activated sludge models have played an important role in practice. With the development of the latest IWA Activated Sludge Model no 3 further progress has been made, and given the concurrent development of new methods for characterization of biomass and wastewater, this is a field of vigorous activity at present. The fifth Kollekolle Seminar brought together many of the world's leading experts on the activated sludge process, who have been working with activated sludge models in practice and research. The aim, as with previous seminars was to present the latest research findings, putting them into the proper perspective. From this high-quality programme 22 papers have been selected and revised to provide the best collection of papers on the state of the art of activated sludge modeling. Papers cover the following topics: modeling developments; wastewater and biomass characterization and parameter identification; modeling in practices.

Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Download or read book Modeling of Activated Sludge Systems written by Derin Orhon and published by CRC Press. This book was released on 1997-07-15 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated sludge is the most vital wastewater process today. Now, this recent book provides a comprehensive guide to the modelling and design of activated sludge systems. Written by two leaders in the wastewater field, the book presents extensive and up-to-date coverage of all areas in the activated sludge process microbiological basis, reactor kinetics, and design methodologies. The book is organized for easy reference and is ideal as a text or desktop guide.

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Wastewater Treatment Process Modeling Second Edition MOP31 written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2013-09-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Complete, Up-to-Date Guide to Process Modeling Methods and Protocols Fully revised to cover the latest advances in the field, Wastewater Treatment Process Modeling, Second Edition, explains general modeling concepts and terminology and offers practical details on how to use process models for the design and operation of small, medium, and large water resource recovery facilities. This Water Environment Federation manual describes each step of the modeling process, including the fundamental math required, overviews of existing models and when to use them, modeling protocols, and how to interpret data. The detailed information in this authoritative volume helps to ensure that process models are developed, used, and documented correctly. Coverage includes: History of process modeling Modeling fundamentals Unit process model descriptions Process modeling tools Dedicated experiments and tools Overview of available modeling and simulation protocols Project definition Building a facility model Using models for design, optimization, and control

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book International Conference on Advanced Intelligent Systems for Sustainable Development written by Janusz Kacprzyk and published by Springer Nature. This book was released on 2023-06-11 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the potential contributions of emerging technologies in different fields as well as the opportunities and challenges related to the integration of these technologies in the socio-economic sector. In this book, many latest technologies are addressed, particularly in the fields of computer science and engineering. The expected scientific papers covered state-of-the-art technologies, theoretical concepts, standards, product implementation, ongoing research projects, and innovative applications of Sustainable Development. This new technology highlights, the guiding principle of innovation for harnessing frontier technologies and taking full profit from the current technological revolution to reduce gaps that hold back truly inclusive and sustainable development. The fundamental and specific topics are Big Data Analytics, Wireless sensors, IoT, Geospatial technology, Engineering and Mechanization, Modeling Tools, Risk analytics, and preventive systems.

Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Formation characterization and mathematical modeling of the aerobic granular sludge written by Bing-Jie Ni and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic granular sludge technology will play an important role as an innovative technology alternative to the present activated sludge process in industrial and municipal wastewater treatment in the near future. Intended to fill the gaps in the studies of aerobic granular sludge, this thesis comprehensively investigates the formation, characterization and mathematical modeling of aerobic granular sludge, through integrating the process engineering tools and advanced molecular microbiology. The research results of this thesis contributed significantly to the advance of understanding and optimization of the bacterial granulation processes, the next generation of technology for cost-effective biological wastewater treatment. Dr. Bing-Jie Ni works at Advanced Water Management Centre (AWMC) of The University of Queensland, Australia.

Download or read book On the Verifiability of the Activated Sludge System Dynamics written by and published by . This book was released on 1993 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Uncertainty Management in the Activated Sludge Process written by Abdelaziz Guergachi and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, the foundations of a new area of research regarding mathematical modelling of biological wastewater treatment (WWT) processes are set. The main feature of this area is the introduction of innovative concepts and tools from emerging information modelling technologies into the traditional field of WWT process modelling. The model identification procedure is viewed as a learning problem or, equivalently, an information transfer from a set of real data into the process model. An innovative mathematical framework for the identification and validation of dynamic mechanistically based WWT process models is developed. Within this framework, a relationship between the model identification procedure and the computational machine learning methodology is established at the foundational level. The deviation D between model prediction and the real process behaviour is characterized mathematically in terms of some simple variables that govern model performance--namely: (1) the size of the data set used for model identification; (2) the quality of these data; (3) the model complexity; (4) the empirical measure of D computed on the basis of the foregoing data set. The development of the relationship between D and these variables is based on a principle called " Inductive Principle of Empirical Risk Minimization" ( IPERM ). The conditions of applicability of IPERM are thoroughly examined in the case of the activated sludge process being described by a simple mechanistic model denoted M . The Vapnik-Chervonenkis (VC) dimension of this model is estimated and two uncertainty models are developed for the activated sludge process (ASP). These two uncertainty models are compared and the differences between them accounted for. The following result is established: empirical data cannot compensate for our limited knowledge of process mechanisms, even if an infinite amount of data and computing power are made available during the model identification procedure. Measures of process model maximal and marginal improvements are developed. It is established that 80% of the model ( M ) maximal improvement occurs at a number of data points of about N80% 15 to 18. To achieve the other 20%, N has to be increased from the relatively small number N 80% to infinity. Procedures for computing the marginal cost of process model improvement and the guaranteed prediction accuracy of the identified model are developed. A new approach to modelling the activated sludge process itself and dealing with the almost-infinite degree of complexity of the ASP behaviour is developed. The basic idea of this approach is to construct an infinite series NS of nested mechanistic models of increasing complexity. This nested series is developed using the multi-substrate hypothesis. Both the Monod and the Tiessier models are considered in developing this nested series. Another principle called "Inductive Principle of Structural Risk Minimization" ( IPSRM ) is introduced and implemented to determine the optimal model structure complexity, for a fixed and small number N of data points. Computer simulations are carried out to confirm the theory and illustrate the use of the IPSRM and that of the nested series NS of ASP models.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1989 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Selected Annotated Bibliography on the Analysis of Water Resource Systems written by Water Resources Scientific Information Center and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: