Download or read book Mathematical Modeling of Biofilms written by IWA Task Group on Biofilm Modeling and published by IWA Publishing. This book was released on 2006-04-30 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 90% of bacterial biomass exists in the form of biofilms. The ability of bacteria to attach to surfaces and to form biofilms often is an important competitive advantage for them over bacteria growing in suspension. Some biofilms are "good" in natural and engineered systems; they are responsible for nutrient cycling in nature and are used to purify waters in engineering processes. Other biofilms are "bad" when they cause fouling and infections of humans and plants. Whether we want to promote good biofilms or eliminate bad biofilms, we need to understand how they work and what works to control them. Mathematical Modeling of Biofilms provides guidelines for the selection and use of mathematical models of biofilms. The whole range of existing models - from simple analytical expressions to complex numerical models - is covered. The application of the models for the solution of typical problems is demonstrated, and the performance of the models is tested in comparative studies. With the dramatic evolution of the computational capacity still going on, modeling tools for research and practice will become more and more significant in the next few years. This report provides the foundation to understand the models and to select the most appropriate one for a given use. Mathematical Modeling of Biofilms gives a state-of-the-art overview that is especially valuable for educating students, new biofilm researchers, and design engineers. Through a series of three benchmark problems, the report demonstrates how to use the different models and indicates when simple or highly complex models are most appropriate. This is the first report to give a quantitative comparison of existing biofilm models. The report supports model-based design of biofilm reactors. The report can be used as basis for teaching biofilm-system modeling. The report provides the foundation for researchers seeking to use biofilm modeling or to develop new biofilm models. Scientific and Technical Report No.18

Download or read book Anaerobic Digestion Model No 1 ADM1 written by IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes and published by IWA Publishing. This book was released on 2002-02-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1990 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fossil Energy Update written by and published by . This book was released on 1976 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Livestock and the Environment written by M. L. Rowe and published by . This book was released on 1976 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research Reporting Series written by and published by . This book was released on 1972 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coal Abstracts written by and published by . This book was released on 1993 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Reacting Flows written by P.A. Libby and published by Springer. This book was released on 2014-03-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. - Introduces syngas characteristics and its properties - Describes various methods and technologies for producing syngas - Discusses syngas production from different roots and feedstocks

Download or read book Air Pollution the Automobile and Public Health written by Sponsored by The Health Effects Institute and published by National Academies Press. This book was released on 1988-01-01 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The combination of scientific and institutional integrity represented by this book is unusual. It should be a model for future endeavors to help quantify environmental risk as a basis for good decisionmaking." â€"William D. Ruckelshaus, from the foreword. This volume, prepared under the auspices of the Health Effects Institute, an independent research organization created and funded jointly by the Environmental Protection Agency and the automobile industry, brings together experts on atmospheric exposure and on the biological effects of toxic substances to examine what is knownâ€"and not knownâ€"about the human health risks of automotive emissions.

Download or read book Chemical Reactor Design written by Juan A. Conesa and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the technical and calculation problems of chemical reactor analysis, scale-up, catalytic and biochemical reactor design Chemical Reactor Design offers a guide to the myriad aspects of reactor design including the use of numerical methods for solving engineering problems. The author - a noted expert on the topic - explores the use of transfer functions to study residence time distributions, convolution and deconvolution curves for reactor characterization, forced-unsteady-state-operation, scale-up of chemical reactors, industrial catalysis, design of multiphasic reactors, biochemical reactors design, as well as the design of multiphase gas-liquid-solid reactors. Chemical Reactor Design contains several examples of calculations and it gives special emphasis on the numerical solutions of differential equations by using the finite differences approximation, which offers the background information for understanding other more complex methods. The book is designed for the chemical engineering academic community and includes case studies on mathematical modeling by using of MatLab software. This important book: - Offers an up-to-date insight into the most important developments in the field of chemical, catalytic, and biochemical reactor engineering - Contains new aspects such as the use of numerical methods for solving engineering problems, transfer functions to study residence time distributions, and more - Includes illustrative case studies on MatLab approach, with emphasis on numerical solution of differential equations using the finite differences approximation Written for chemical engineers, mechanical engineers, chemists in industry, complex chemists, bioengineers, and process engineers, Chemical Reactor Design addresses the technical and calculation problems of chemical reactor analysis, scale-up, as well as catalytic and biochemical reactor design.

Download or read book Improving Characterization of Anthropogenic Methane Emissions in the United States written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-08-25 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding, quantifying, and tracking atmospheric methane and emissions is essential for addressing concerns and informing decisions that affect the climate, economy, and human health and safety. Atmospheric methane is a potent greenhouse gas (GHG) that contributes to global warming. While carbon dioxide is by far the dominant cause of the rise in global average temperatures, methane also plays a significant role because it absorbs more energy per unit mass than carbon dioxide does, giving it a disproportionately large effect on global radiative forcing. In addition to contributing to climate change, methane also affects human health as a precursor to ozone pollution in the lower atmosphere. Improving Characterization of Anthropogenic Methane Emissions in the United States summarizes the current state of understanding of methane emissions sources and the measurement approaches and evaluates opportunities for methodological and inventory development improvements. This report will inform future research agendas of various U.S. agencies, including NOAA, the EPA, the DOE, NASA, the U.S. Department of Agriculture (USDA), and the National Science Foundation (NSF).

Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1990 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Natural Gas Formation Processing and Applications Volume 8 Natural Gas Process Modelling and Simulation written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-05-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Natural Gas: Formation, Processing, and Applications is a comprehensive eight-volume set of books that discusses in detail the theoretical basics and practical methods of various aspects of natural gas from exploration and extraction, to synthesizing, processing and purifying, producing valuable chemicals and energy. The volumes introduce transportation and storage challenges as well as hydrates formation, extraction, and prevention Volume 8 titled Process Modelling and Simulation discusses various aspects of natural gas related processes from modelling and simulation point of view. This includes modelling of natural gas sweetening, dehydration and other impurities removal processes and apparatus as well as simulation of processes and apparatus dealt with producing chemicals and energy from natural gas.The book introduces modelling and simulation of natural gas hydrate related processes and covers modelling basics, numerical approaches and optimization techniques, which provides a deeper understanding of the subject. - Introduces modelling and simulation methods for natural gas sweetening and purification - Describes modelling and simulation procedures of producing chemicals and energy from natural gas - Discusses theoretical basics and models of natural gas hydrates

Download or read book EPA 600 2 written by and published by . This book was released on 1979 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Livestock and the Environment written by Ralph H. Ramsey and published by . This book was released on 1974 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: