Download or read book Materials Technology Gaps in Metal Additive Manufacturing written by Cynthia Waters and published by SAE International. This book was released on 2018-04-24 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal additive manufacturing (MAM) is an exciting emergent technology that offers the possibility of democratizing metal manufacturing worldwide. Many believe it has the ability to revolutionize product manufacturing on a global scale. MAM will require a considerable design shift for manufacturers and, hence, will disrupt conventional thinking and require adaptation. Visionaries in the mobility industry can see the transformative possibilities after materials considerations are addressed./ Materials Technology Gaps in Metal Additive Manufacturing introduces the reader to various opportunities and relationships in the study of material technologies involved in metal-based additive manufacturing of aerospace and automotive parts. Everything starts and ends with the material feedstock, and the intermediate processes that affect a particular metal. Each of the choices in the complex integrated MAM system impacts final-part properties. Edited by Dr. Cynthia K. Waters, from North Carolina A&T State University, Materials Technology Gaps in Metal Additive Manufacturing is a highly curated collection of 10 seminal SAE International papers. They discuss the various technologies involved in MAM, and draw attention to the materials needs in each of the situations addressed. The main topics included in Materials Technology Gaps in Metal Additive Manufacturing are: Process design and material modeling Metal powder selection and study Additive processing parameters' effect on materials properties As more interdependencies of material properties and possible manufacturing processes evolve (compatibility interdependence), questions if the specific manufacturing process is capable to create the required geometry will also arise. Materials Technology Gaps in Metal Additive Manufacturing brings innovative ways to address these and other challenges that are always present in the adoption of novel technologies.
Download or read book Materials Technology Gaps in Metal Additive Manufacturing written by Cynthia K. Waters and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the reader to various opportunities and relationships in the study of material technologies involved in metal- based additive manufacturing of aerospace and automotive parts. Everything starts and ends with the material feedstock, and the intermediate processes that affect a particular metal. Each of the choices in the complex integrated MAM system impacts final-part properties.
Download or read book Materials Technology Gaps in Metal Additive Manufacturing written by Cynthia Waters and published by SAE International. This book was released on 2018-04-24 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal additive manufacturing (MAM) is an exciting emergent technology that offers the possibility of democratizing metal manufacturing worldwide. Many believe it has the ability to revolutionize product manufacturing on a global scale. MAM will require a considerable design shift for manufacturers and, hence, will disrupt conventional thinking and require adaptation. Visionaries in the mobility industry can see the transformative possibilities after materials considerations are addressed./ Materials Technology Gaps in Metal Additive Manufacturing introduces the reader to various opportunities and relationships in the study of material technologies involved in metal-based additive manufacturing of aerospace and automotive parts. Everything starts and ends with the material feedstock, and the intermediate processes that affect a particular metal. Each of the choices in the complex integrated MAM system impacts final-part properties. Edited by Dr. Cynthia K. Waters, from North Carolina A&T State University, Materials Technology Gaps in Metal Additive Manufacturing is a highly curated collection of 10 seminal SAE International papers. They discuss the various technologies involved in MAM, and draw attention to the materials needs in each of the situations addressed. The main topics included in Materials Technology Gaps in Metal Additive Manufacturing are: Process design and material modeling Metal powder selection and study Additive processing parameters' effect on materials properties As more interdependencies of material properties and possible manufacturing processes evolve (compatibility interdependence), questions if the specific manufacturing process is capable to create the required geometry will also arise. Materials Technology Gaps in Metal Additive Manufacturing brings innovative ways to address these and other challenges that are always present in the adoption of novel technologies.
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners
Download or read book Additive Manufacturing of Metals written by Leila Ladani and published by . This book was released on 2020-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a technical introduction to additive manufacturing (AM) with a focus on powder bed fusion and metals. It provides the theory and industry-based practices to design, make, and test metal components via AM. After outlining the methods and materials of powder bed methods, the book explains the workings and physical limitations of electron beam and laser melt technologies in manufacturing parts, using a variety of metal powders. In this context, the physics of powder melting is described, as well as the effects of temperature variables on the properties of a part. The critical elements of how powder feedstock is chosen and formulated are explained. Processing methods are described using original design and engineering parameters developed by the author. Information is provided on current test methods of metals produced by AM, as well as how to carry out quality control, monitor reliability, and implement safety standards. For process design, a section is devoted to modeling.Each chapter includes a set of problems for students and practitioners that reflect metals' fabrication in industry.
Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-07-10 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future direction of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.
Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. - Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) - Discusses available commercial metal AM technologies and their relative strengths and weaknesses - Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM
Download or read book Additive Manufacturing with Metals written by Sanjay Joshi and published by Springer Nature. This book was released on 2023-12-29 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and reference provides a comprehensive treatment of additive manufacturing (AM) for metals, including design and digital work flows, process science and reliability, metallic systems, quality assurance, and applications. The book is rooted in the fundamental science necessary to develop and understand AM technologies, as well as the application of engineering principles covering several disciplines to successfully exploit this important technology. As additive manufacturing of metals is the fastest growing subset of this transformative technology, with the potential to make the widest impact to industrial production, Metals Additive Manufacturing: Design, Processes, Materials, Quality Assurance, and Applications is ideal for students in a range of engineering disciplines and practitioners working in aerospace, automotive, medical device manufacturing industries.
Download or read book Additive Manufacturing of Metal Alloys 1 written by Patrice Peyre and published by John Wiley & Sons. This book was released on 2022-08-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade or so, additive manufacturing has revolutionized design and manufacturing methods by allowing more freedom in design and functionalities unattainable with conventional processes. This has generated extraordinarily high interest in both industrial and academic communities. Additive Manufacturing of Metal Alloys 1 puts forward a state of the art of additive manufacturing and its different processes, from metallic raw materials (in the form of powder or wire) to their properties after elaboration. It analyzes the physics and the modelling of existing AM processes as well as future elaboration processes. Using a balanced approach encapsulating basic notions and more advanced aspects for each theme, this book acts as a metal additive manufacturing textbook, as useful to professionals in the field as to the general public.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book Advances in Metal Additive Manufacturing written by Sachin Salunkhe and published by Elsevier. This book was released on 2022-10-10 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Metal Additive Manufacturing explains fundamental information and the latest research on new technologies, including powder bed fusion, direct energy deposition using high energy beams, and hybrid additive and subtractive methods. This book introduces readers to the technology, provides everything needed to understand how the different stages work together, and inspires to think beyond traditional metal processing to capture new ideas in metal. Chapters offer an introduction on metal additive manufacturing, processes, and properties and standards and then present surveys on the most significant international advances in metal additive manufacturing. Throughout, the book presents a focus on the effect of important process parameters on the microstructure, mechanical properties and wear behavior of additively manufactured parts. - Covers the entire process chain of metal additive manufacturing, from input data preparation to part certification - Describes a wide range of the latest design tools and options, including generative design, topology optimization, and lattice and surface optimization - Addresses additive manufacturing, with a comprehensive list of metals including titanium, aluminum, iron-and nickel-based alloys and Inconel 718
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application
Download or read book Hybrid Metal Additive Manufacturing written by Parnika Shrivastava and published by CRC Press. This book was released on 2023-12-05 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text presents the latest research and development, technical challenges, and future directions in the field of hybrid metal additive manufacturing. It further discusses the modeling of hybrid additive manufacturing processes for metals, hybrid additive manufacturing of composite materials, and low-carbon hybrid additive manufacturing processes. THIS BOOK •Presents cutting-edge advancements and limitations in hybrid additive manufacturing technologies. • Discusses fabrication methods and rapid tooling techniques focusing on metals, composites, and alloys. •Highlights the importance of low-carbon additive manufacturing technologies toward achieving sustainability. •Emphasizes the challenges and solutions for integrating additive manufacturing and Industry 4.0 to enable rapid manufacturing of customized and tailored products. • Covers hybrid additive manufacturing of composite materials and additive manufacturing for fabricating high-hardness components. The text discusses the recent advancements in additive manufacturing of high-hardness components and covers important engineering materials such as metals, alloys, and composites. It further highlights defects and post-processing of hybrid additive manufacturing components, sustainability solutions for hybrid additive manufacturing processes, and recycling of machining waste into metal powder feedstock. It will serve as an ideal reference text for senior undergraduate and graduate students, and researchers in fields including mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering.
Download or read book Laser Based Additive Manufacturing of Metal Parts written by Linkan Bian and published by CRC Press. This book was released on 2017-08-09 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Based Additive Manufacturing (LBAM) technologies, hailed by some as the "third industrial revolution," can increase product performance, while reducing time-to-market and manufacturing costs. This book is a comprehensive look at new technologies in LBAM of metal parts, covering topics such as mechanical properties, microstructural features, thermal behavior and solidification, process parameters, optimization and control, uncertainty quantification, and more. The book is aimed at addressing the needs of a diverse cross-section of engineers and professionals.
Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.
Download or read book Precision Metal Additive Manufacturing written by Richard Leach and published by CRC Press. This book was released on 2020-09-21 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is a fast-growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies, however, still face technological challenges such as limited precision due to shrinkage, built-in stresses and limited process stability and robustness. Moreover, often post-processing is needed due to high roughness and remaining porosity. Qualified, trained personnel are also in short supply. In recent years, there have been dramatic improvements in AM design methods, process control, post-processing, material properties and material range. However, if AM is going to gain a significant market share, it must be developed into a true precision manufacturing method. The production of precision parts relies on three principles: Production is robust (i.e. all sensitive parameters can be controlled). Production is predictable (for example, the shrinkage that occurs is acceptable because it can be predicted and compensated in the design). Parts are measurable (as without metrology, accuracy, repeatability and quality assurance cannot be known). AM of metals is inherently a high-energy process with many sensitive and inter-related process parameters, making it susceptible to thermal distortions, defects and process drift. The complete modelling of these processes is beyond current computational power, and novel methods are needed to practicably predict performance and inform design. In addition, metal AM produces highly textured surfaces and complex surface features that stretch the limits of contemporary metrology. With so many factors to consider, there is a significant shortage of background material on how to inject precision into AM processes. Shortage in such material is an important barrier for a wider uptake of advanced manufacturing technologies, and a comprehensive book is thus needed. This book aims to inform the reader how to improve the precision of metal AM processes by tackling the three principles of robustness, predictability and metrology, and by developing computer-aided engineering methods that empower rather than limit AM design. Richard Leach is a professor in metrology at the University of Nottingham and heads up the Manufacturing Metrology Team. Prior to this position, he was at the National Physical Laboratory from 1990 to 2014. His primary love is instrument building, from concept to final installation, and his current interests are the dimensional measurement of precision and additive manufactured structures. His research themes include the measurement of surface topography, the development of methods for measuring 3D structures, the development of methods for controlling large surfaces to high resolution in industrial applications and the traceability of X-ray computed tomography. He is a leader of several professional societies and a visiting professor at Loughborough University and the Harbin Institute of Technology. Simone Carmignato is a professor in manufacturing engineering at the University of Padua. His main research activities are in the areas of precision manufacturing, dimensional metrology and industrial computed tomography. He is the author of books and hundreds of scientific papers, and he is an active member of leading technical and scientific societies. He has been chairman, organiser and keynote speaker for several international conferences, and received national and international awards, including the Taylor Medal from CIRP, the International Academy for Production Engineering.
