Download or read book Materials Performance Modeling and Simulation written by Yafang Han and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of peer reviewed papers C-MRS 2012 meeting includes 102 papers selected from Symposium P: Advanced processing of materials, Symposium V: Materials modeling and simulation, and Symposium W: Materials surface and interface.
Download or read book Modeling and Simulation for Material Selection and Mechanical Design written by George E. Totten and published by CRC Press. This book was released on 2003-12-02 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. With contributions from internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.
Download or read book Materials Modeling Simulation and Characterization written by En Hou Han and published by Trans Tech Publications Ltd. This book was released on 2011-06-10 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the IUMRS-ICA 2010, 11th IUMRS International Conference in Asia, September 25-28, 2010, Qingdao, China
Download or read book Molecular Mechanisms in Materials written by Sidney Yip and published by MIT Press. This book was released on 2023-10-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: A student-oriented introduction to understanding mechanisms at the atomistic level controlling macroscopic materials phenomena through molecular dynamics simulations. Machine-learning-based computation in materials innovation, performance optimization, and sustainability offers exciting opportunities at the mesoscale research frontier. Molecular Mechanisms in Materials presents research findings and insights about material behavior at the molecular level and its impact on macroscopic properties. The book’s fifteen essays represent author Sidney Yip’s work in atomistic modeling and materials simulation over more than five decades. The phenomena are grouped into five basic types: fluctuations in simple fluids, crystal melting, plasticity and fracture, glassy relaxations, and amorphous rheology, all focused on molecular mechanisms in base materials. The organizing principle of Molecular Mechanisms in Materials is multiscale modeling and simulation, where conceptual models and simulation techniques are linked across the micro-to-macro length and time scales to control the outcome of specific materials processes. Each essay addresses a specific standalone topic of materials phenomena while also recognizing the larger context of materials science and technology. Individual case studies serve both as standalone essays and companion pieces to each other. Indeed, the global transformation of science and technology is well underway: in his epilogue, Yip discusses the potential of artificial intelligence and machine learning to enhance future materials for societal benefits in the face of global challenges such as climate change, energy sustainability, infrastructure renewal, and nuclear arms control.
Download or read book Scientific Modeling and Simulations written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2010-04-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although computational modeling and simulation of material deformation was initiated with the study of structurally simple materials and inert environments, there is an increasing demand for predictive simulation of more realistic material structure and physical conditions. In particular, it is recognized that applied mechanical force can plausibly alter chemical reactions inside materials or at material interfaces, though the fundamental reasons for this chemomechanical coupling are studied in a material-speci c manner. Atomistic-level s- ulations can provide insight into the unit processes that facilitate kinetic reactions within complex materials, but the typical nanosecond timescales of such simulations are in contrast to the second-scale to hour-scale timescales of experimentally accessible or technologically relevant timescales. Further, in complex materials these key unit processes are “rare events” due to the high energy barriers associated with those processes. Examples of such rare events include unbinding between two proteins that tether biological cells to extracellular materials [1], unfolding of complex polymers, stiffness and bond breaking in amorphous glass bers and gels [2], and diffusive hops of point defects within crystalline alloys [3].
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Mechanical Behavior of Advanced Materials Modeling and Simulation written by Qihong Fang and published by CRC Press. This book was released on 2023-11-30 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent developments in the field of advanced materials, there exists a need for a systematic summary and detailed introduction of the modeling and simulation methods for these materials. This book provides a comprehensive description of the mechanical behavior of advanced materials using modeling and simulation. It includes materials such as high-entropy alloys, high-entropy amorphous alloys, nickel-based superalloys, light alloys, electrode materials, and nanostructured reinforced composites. Reviews the performance and application of a variety of advanced materials and provides the detailed theoretical modeling and simulation of mechanical properties Covers the topics of deformation, fracture, diffusion, and fatigue Features worked examples and exercises that help readers test their understanding This book is aimed at researchers and advanced students in solid mechanics, material science, engineering, material chemistry, and those studying the mechanics of materials.
Download or read book Multiscale Modeling and Simulation of Shock Wave Induced Failure in Materials Science written by Martin Oliver Steinhauser and published by Springer. This book was released on 2018-02-24 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martin Oliver Steinhauser deals with several aspects of multiscale materials modeling and simulation in applied materials research and fundamental science. He covers various multiscale modeling approaches for high-performance ceramics, biological bilayer membranes, semi-flexible polymers, and human cancer cells. He demonstrates that the physics of shock waves, i.e., the investigation of material behavior at high strain rates and of material failure, has grown to become an important interdisciplinary field of research on its own. At the same time, progress in computer hardware and software development has boosted new ideas in multiscale modeling and simulation. Hence, bridging the length and time scales in a theoretical-numerical description of materials has become a prime challenge in science and technology.
Download or read book Uncertainty Quantification in Multiscale Materials Modeling written by Yan Wang and published by Woodhead Publishing. This book was released on 2020-03-10 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty Quantification in Multiscale Materials Modeling provides a complete overview of uncertainty quantification (UQ) in computational materials science. It provides practical tools and methods along with examples of their application to problems in materials modeling. UQ methods are applied to various multiscale models ranging from the nanoscale to macroscale. This book presents a thorough synthesis of the state-of-the-art in UQ methods for materials modeling, including Bayesian inference, surrogate modeling, random fields, interval analysis, and sensitivity analysis, providing insight into the unique characteristics of models framed at each scale, as well as common issues in modeling across scales. Synthesizes available UQ methods for materials modeling Provides practical tools and examples for problem solving in modeling material behavior across various length scales Demonstrates UQ in density functional theory, molecular dynamics, kinetic Monte Carlo, phase field, finite element method, multiscale modeling, and to support decision making in materials design Covers quantum, atomistic, mesoscale, and engineering structure-level modeling and simulation
Download or read book Multiscale Modeling and Analysis for Materials Simulation written by Weizhu Bao and published by World Scientific. This book was released on 2012 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Mathematical Sciences at the National University of Singapore hosted a two-month research program on OC Mathematical Theory and Numerical Methods for Computational Materials Simulation and DesignOCO from 1 July to 31 August 2009. As an important part of the program, tutorials and special lectures were given by leading experts in the fields for participating graduate students and junior researchers. This invaluable volume collects four expanded lecture notes with self-contained tutorials. They cover a number of aspects on multiscale modeling, analysis and simulations for problems arising from materials science including some critical components in computational prediction of materials properties such as the multiscale properties of complex materials, properties of defects, interfaces and material microstructures under different conditions, critical issues in developing efficient numerical methods and analytic frameworks for complex and multiscale materials models. This volume serves to inspire graduate students and researchers who choose to embark into original research work in these fields.
Download or read book Deformation Based Processing of Materials written by Heng Li and published by Elsevier. This book was released on 2019-02-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation Based Processing of Materials: Behavior, Performance, Modeling and Control focuses on deformation based process behaviors and process performance in terms of the quality of the needed shape, geometries, and the requested properties of the deformed products. In addition, modelling and simulation is covered to create an in-depth and epistemological understanding of the process. Other topics discussed include ways to efficiently reduce or avoid defects and effectively improve the quality of deformed parts. The book is ideal as a technical document, but also serves as scientific literature for engineers, scientists, academics, research students and management professionals involved in deformation based materials processing. Covers process behaviors, such as non-uniform deformation, unstable deformation, material flow phenomena, and process performance Includes modelling and simulation of the entire deformation process Looks at control of the preferred deformation, undesirable material flow, avoidance and reduction of defects, and improving the dimensional accuracy, surface quality and microstructure construction of the produced products
Download or read book Simulation Modeling written by Constantin Volosencu and published by BoD – Books on Demand. This book was released on 2022-01-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents some recent specialized works of a theoretical and practical nature in the field of simulation modeling, which is being addressed to a large number of specialists, mathematicians, doctors, engineers, economists, professors, and students. The book comprises 11 chapters that promote modern mathematical algorithms and simulation modeling techniques, in practical applications, in the following thematic areas: mathematics, biomedicine, systems of systems, materials science and engineering, energy systems, and economics. This project presents scientific papers and applications that emphasize the capabilities of simulation modeling methods, helping readers to understand the phenomena that take place in the real world, the conditions of their development, and their effects, at a high scientific and technical level. The authors have published work examples and case studies that resulted from their researches in the field. The readers get new solutions and answers to questions related to the emerging applications of simulation modeling and their advantages.
Download or read book High Performance Computing for Advanced Modeling and Simulation of Materials written by Jue Wang and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Scale Modeling and Characterization of Infrastructure Materials written by Niki Kringos and published by Springer Science & Business Media. This book was released on 2013-05-26 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance. The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustainable infrastructure materials. Researchers, practitioners, undergraduates and graduate students engaged in infrastructure materials or multi-scale characterization and modeling efforts can use this book as a comprehensive reference, to learn about the currently ongoing research efforts in this field or as an inspiration for new research ideas to enhance the long-term performance of infrastructure materials from a fundamental perspective. The Symposium was held under the auspices of the RILEM Technical Committee on Nanotechnology-Based Bituminous Materials 231-NBM and the Transport Research Board (TRB) Technical Committee on Characteristics of Asphalt Materials AFK20.
Download or read book Handbook of Materials Modeling written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2007-11-17 with total page 2903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.
Download or read book Analytical Performance Modeling for Computer Systems written by Y.C. Tay and published by Morgan & Claypool Publishers. This book was released on 2018-07-23 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering mechanics is one of the fundamental branches of science that is important in the education of professional engineers of any major. Most of the basic engineering courses, such as mechanics of materials, fluid and gas mechanics, machine design, mechatronics, acoustics, vibrations, etc. are based on engineering mechanics courses. In order to absorb the materials of engineering mechanics, it is not enough to consume just theoretical laws and theorems—a student also must develop an ability to solve practical problems. Therefore, it is necessary to solve many problems independently. This book is a part of a four-book series designed to supplement the engineering mechanics courses. This series instructs and applies the principles required to solve practical engineering problems in the following branches of mechanics: statics, kinematics, dynamics, and advanced kinetics. Each book contains between 6 and 8 topics on its specific branch and each topic features 30 problems to be assigned as homework, tests, and/or midterm/final exams with the consent of the instructor. A solution of one similar sample problem from each topic is provided. This first book contains seven topics of statics, the branch of mechanics concerned with the analysis of forces acting on construction systems without an acceleration (a state of the static equilibrium). The book targets the undergraduate students of the sophomore/junior level majoring in science and engineering.
Download or read book Modeling Materials written by Ellad B. Tadmor and published by Cambridge University Press. This book was released on 2011-11-24 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material properties emerge from phenomena on scales ranging from Angstroms to millimeters, and only a multiscale treatment can provide a complete understanding. Materials researchers must therefore understand fundamental concepts and techniques from different fields, and these are presented in a comprehensive and integrated fashion for the first time in this book. Incorporating continuum mechanics, quantum mechanics, statistical mechanics, atomistic simulations and multiscale techniques, the book explains many of the key theoretical ideas behind multiscale modeling. Classical topics are blended with new techniques to demonstrate the connections between different fields and highlight current research trends. Example applications drawn from modern research on the thermo-mechanical properties of crystalline solids are used as a unifying focus throughout the text. Together with its companion book, Continuum Mechanics and Thermodynamics (Cambridge University Press, 2011), this work presents the complete fundamentals of materials modeling for graduate students and researchers in physics, materials science, chemistry and engineering.
