Download or read book Corrosion Failures written by K. Elayaperumal and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides corrosion basics in a lucid manner to students and working professionals and over 80 corrosion-failure analysis case studies Correlates Failure Analysis with Corrosion Science Exclusively provides corrosion-related failure analysis case histories in one place in a convenient format One-stop shop for both science and real time occurrence of the phenomenon of corrosion Full coverage of all MOC, Materials of Construction, used for process equipments Simple but Lucid presentation of Failure Analysis procedure
Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.
Download or read book Materials Selection for Hydrocarbon and Chemical Plants written by Hansen and published by CRC Press. This book was released on 1996-08-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.
Download or read book Practical Guidelines for the Chemical Industry written by Kiran R. Golwalkar and published by Springer Nature. This book was released on 2022-04-27 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical guidelines to chemical engineers, plant managers, maintenance engineers, and senior managements in modern chemical processing facilities. It provides guidelines to the readers for operational competencies such as hazard identification (HAZID), hazard operability studies (HAZOP), avoiding mistakes in plant facilities to ensure safety, compliance with various statutory rules and regulations; and management of human resources through improved working conditions, provision of safety equipment etc. It further presents technical information on pressure vessels, design of piping and selection of pumping systems, materials for construction and lining of process units operating at high temperature and corrosive conditions, and criteria for selection of different methods for heating of process units. In addition to its application to existing operations, the book includes information on expansion, diversification, and modernization of facilities and guidelines for revival of old and idle plants. Finally, the authors discuss various safety issues, controlling cost of production, and sustainability topics such as planning and implementing co-generation of steam and power, environmental pollution control for chemical plants and safe disposal of hazardous wastes.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Handbook for Chemical Process Industries written by Himanshu J Patel and published by CRC Press. This book was released on 2023-10-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical processing industry plays a pivotal role in the economy of a country, as chemicals are required in every sphere of our lives. This book covers chemical processing of dyes, pigments, drugs and pharmaceutical products, fermented products, agrochemicals, explosives, polymers, Period II and III chemicals, chemicals, sugar, coatings, starches, soaps and detergents, paper, pulp, glass, and cement. It includes sources of natural materials, collection process, purification, and extraction of different chemicals from natural materials like petroleum, coal and ores from the Earth. It includes manufacturing details of C1 to C4 and aromatic compounds obtained from natural materials. The book covers both traditional and modern sectors of the chemical processing industry. It provides knowledge on the properties of the chemical and manufacturing process (such as raw materials, chemical reactions, quantitative requirement, flow sheet diagram, procedure) and its uses. The book is based on the author's expertise and has been developed with an awareness of the quantitative requirement for manufacturing chemicals. Data has been collected from industry, thus it will be useful to industry personnel, research groups, academicians and institutional organizations.
Download or read book Shreve s Chemical Process Industries written by Randolph Norris Shreve and published by McGraw Hill Professional. This book was released on 1984 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theory and practice. It provides fundamental information on heterogeneous catalysis and the practicalities of the catalysts and processes used in producing ammonia, hydrogen and methanol via hydrocarbon steam reforming. It also covers the oxidation reactions in making formaldehyde from methanol, nitric acid from ammonia and sulphuric acid from sulphur dioxide. Designed for use in the chemical industry and by those in teaching, research and the study of industrial catalysts and catalytic processes. Students will also find this book extremely useful for obtaining practical information which is not available in more conventional textbooks.
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2011-08-30 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its eleventh edition, DeGarmo's Materials and Processes in Manufacturing has been a market-leading text on manufacturing and manufacturing processes courses for more than fifty years. Authors J T. Black and Ron Kohser have continued this book's long and distinguished tradition of exceedingly clear presentation and highly practical approach to materials and processes, presenting mathematical models and analytical equations only when they enhance the basic understanding of the material. Completely revised and updated to reflect all current practices, standards, and materials, the eleventh edition has new coverage of additive manufacturing, lean engineering, and processes related to ceramics, polymers, and plastics.
Download or read book Materials Selection for Corrosion Control written by Sohan L. Chawla and published by ASM International. This book was released on 1993-01-01 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a methodology for integrating materials selection with the design process, including simultaneous technical and economic evaluation. Save hours of frustrating research time: Get fast answers about the best material for a particular application. In the past, researching the endless sources on corrosion and materials in their countless applications were next to impossible. That's why this book was written: to help simplify your materials selection problems. It's an exhaustive source on the different corrosion-resistant materials, types of corrosion, factors affecting corrosion, passivation, corrosion monitoring, corrosion control measures, methodology of materials selection, and more.
Download or read book Process Industry Economics written by David J. Brennan and published by IChemE. This book was released on 1998 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: A primer for engineers, giving an overview of key facets of international process economics. The text covers market evaluation, shows how to estimate capital and operating costs, tackles project profitability and how to plan capacity.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Refractory Metals and Their Industrial Applications written by Robert E. Smallwood and published by ASTM International. This book was released on 1984 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concise Encyclopedia of Building and Construction Materials written by Fred Moavenzadeh and published by MIT Press. This book was released on 1990 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: The building materials covered by the Concise Encyclopedia of Building and Construction Materials are classified in three groups: structural materials, semistructural materials, and auxiliary materials.
Download or read book The Multinational Construction Industry written by Howard Seymour and published by Routledge. This book was released on 2019-08-13 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 1987, outlines the motives and methods of overseas operations by international contractors. Drawing on an economic analysis of the industry and on elements of international investment and production theory the book discusses the problems of both individual enterprises and the major nationality groups in the industry
Download or read book Industrial Applications of Titanium and Zirconium written by C. S. Young and published by ASTM International. This book was released on 1986 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Industry Economics written by David Brennan and published by Elsevier. This book was released on 2020-05-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Industry Economics: Principles, Concepts and Applications, Second Edition, explores the fundamentals of market evaluation, capital and operating cost estimation, and profitability evaluation, along with their implications for process technology evaluation, project development and investment decisions. Sections cover time dependent technology evolution in process plants, including scale development, performance improvement in new and operating plants, and learning related to environmental, safety and sustainability assessments. Influences on capital investment decisions, including capacity planning and environmental considerations are explored and supported by case studies. Finally, the aspects of overall industry performance and drivers are discussed. - Outlines the basic principles of economic evaluation - Identifies the roles of engineering, scientific, commercial and management personnel in contributing to economic evaluation - Explores the interaction of economics with safety, environmental and sustainability criteria in project evaluation
Download or read book New Materials in Civil Engineering written by Pijush Samui and published by Butterworth-Heinemann. This book was released on 2020-07-07 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials in Civil Engineering provides engineers and scientists with the tools and methods needed to meet the challenge of designing and constructing more resilient and sustainable infrastructures. This book is a valuable guide to the properties, selection criteria, products, applications, lifecycle and recyclability of advanced materials. It presents an A-to-Z approach to all types of materials, highlighting their key performance properties, principal characteristics and applications. Traditional materials covered include concrete, soil, steel, timber, fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber and reinforced polymers. In addition, the book covers nanotechnology and biotechnology in the development of new materials. - Covers a variety of materials, including fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber reinforced polymer and waste materials - Provides a "one-stop resource of information for the latest materials and practical applications - Includes a variety of different use case studies
