Download or read book Materials for Machine Tool Structures written by L. Lindsay and published by . This book was released on 1969 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tool Structures written by F. Koenigsberger and published by Elsevier. This book was released on 2016-01-21 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration conditions. The following chapters explore the stability of the machine structure against chatter; methods of stability analysis; tests and principles of dampers; chatter during grinding operations; and stresses and deformations of closed box structures subjected to bending and shear. Calculation methods for determining stiffness constants of a structure's individual parts, as well as methods for determining the resulting stiffnesses, modal shapes, and their parameters, are also described. The final chapter presents systematic procedures for the analysis of machine tool structures. This book is intended for university students, research workers, and designers.
Download or read book Machine Tools for High Performance Machining written by Norberto Lopez de Lacalle and published by Springer Science & Business Media. This book was released on 2008-10-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine tools are the main production factor for many industrial applications in many important sectors. Recent developments in new motion devices and numerical control have lead to considerable technological improvements in machine tools. The use of five-axis machining centers has also spread, resulting in reductions in set-up and lead times. As a consequence, feed rates, cutting speed and chip section increased, whilst accuracy and precision have improved as well. Additionally, new cutting tools have been developed, combining tough substrates, optimal geometries and wear resistant coatings. “Machine Tools for High Performance Machining” describes in depth several aspects of machine structures, machine elements and control, and application. The basics, models and functions of each aspect are explained by experts from both academia and industry. Postgraduates, researchers and end users will all find this book an essential reference.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2016-04-06 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Machine Tools Production Systems 2 written by Christian Brecher and published by Springer Nature. This book was released on 2021-11-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Design Principles of Metal Cutting Machine Tools written by F. Koenigsberger and published by Elsevier. This book was released on 2013-09-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Principles of Metal-Cutting Machine Tools discusses the fundamentals aspects of machine tool design. The book covers the design consideration of metal-cutting machine, such as static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The text first details the data calculation and the general requirements of the machine tool. Next, the book discusses the design principles, which include stiffness and rigidity of the separate constructional elements and their combined behavior under load, as well as electrical, mechanical, and hydraulic drives for the operational movements. The next section deals with automatic control, including its principles, constructional elements, and applications. The last section tackles the design of constructional elements, such as machine tool structures, spindles and spindle bearings, and control and operating devices. The book will be of great use to mechanical and manufacturing engineers. Individuals involved in materials manufacturing industry will also benefit from the book.
Download or read book Machining Difficult to Cut Materials written by Hossam A. Kishawy and published by Springer. This book was released on 2018-08-09 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.
Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.
Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.
Download or read book Machine Tools written by Ľubomír Šooš and published by BoD – Books on Demand. This book was released on 2020-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful producers of machine tools today must offer customers highly efficient and accurate machines. This can only be achieved with the help of modern software in research, construction, production and quality control. Trends in development are oriented towards modular construction machines. The application of modern tools and the progressive construction of headstock has increased cutting speeds, thus significantly increasing the machine's productivity. The first section of the book is focused on trends in the development of machines. A second very significant machine parameter is accuracy. The rigidity of the machine is a necessary condition for achieving its required accuracy. The second part of the book is dedicated to the effect of the individual constructional nodes on stability, the optimization of system rigidity, and the measuring of the accuracy of the machining tools. The aim of the third and final section of the book is to point out the widest possibilities for the application of machine tools in industry. An example is presented of the application of machining tools in the orthoses manufacture.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Functional Reverse Engineering of Machine Tools written by Wasim Ahmed Khan and published by CRC Press. This book was released on 2019-09-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to develop capacity building in strategic and non-strategic machine tool technology. The book contains chapters on how to functionally reverse engineer strategic and non-strategic computer numerical control machinery. Numerous engineering areas, such as mechanical engineering, electrical engineering, control engineering, and computer hardware and software engineering, are covered. The book offers guidelines and covers design for machine tools, prototyping, augmented reality for machine tools, modern communication strategies, and enterprises of functional reverse engineering, along with case studies. Features Presents capacity building in machine tool development Discusses engineering design for machine tools Covers prototyping of strategic and non-strategic machine tools Illustrates augmented reality for machine tools Includes Internet of Things (IoT) for machine tools
Download or read book Machine Tools Handbook written by Prakash Hiralal Joshi and published by McGraw Hill Professional. This book was released on 2007-05-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acquire the Skills, Tools, and Techniques Needed to Ensure High Quality and Precision in the Design of Machined Parts! Designed for quick access on the job, Machine Tools Handbook explains in detail how to carry out basic and advanced machine tool operations and functions, providing a wealth of machine tool exercises to test and improve the performance of machinists. The tables, graphs, and formulas packed into this essential reference makes it a must-have for every machine and manufacturing workshop. Machine Tools Handbook features: Expert instructions on performing basic and advanced machine tool operations and functions Comparative tables for machine tool drives Complete guidelines for designing simple circuits for electrical automation Detailed graphs for gear design Solved examples that illustrate and prove formulas Inside This Hands-On Machine Tool Guide • Machine Tool Drives and Mechanisms • Rectilinear Drives • Drive Transmission and Manipulation • Machine Tool Elements • Dynamics of Machine Tools • Machine Tool Operation • Tool Engineering • Exercises
Download or read book Computer Based Design written by Tamir Shahin and published by John Wiley & Sons. This book was released on 2002-08-30 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers from a conference held at Kings College, London. Computer-based Design focuses on all areas of design using computational methods and examines how all these individual tools can be integrated to produce a coherent design process. This volume also covers areas of manual design methods and modelling that are vital to the continuing development and evolution of the computer-aided design process. TOPICS COVERED INCLUDE Product design and modelling Design process Decision-making models Computer-assisted design systems Computer-assisted conceptual design Computer-assisted detailed design Computer assisted design for manufacture Design knowledge manipulation Engineering change Engineering design issues Fuzzy design Computer-aided design Industrial applications of design Advanced design applications Computational fluid dynamics Computer-based Design provides an excellent opportunity for an update on the latest techniques and developments from concept to advanced application in the design arena.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.
