Download or read book Direct Write Technologies for Rapid Prototyping Applications written by Alberto Pique and published by Academic Press. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct-Write Technologies covers applications, materials, and the techniques in using direct-write technologies. This book provides an overview of the different direct write techniques currently available, as well as a comparison between the strengths and special attributes for each of the techniques. The techniques described open the door for building prototypes and testing materials. The book also provides an overview of the state-of-the-art technology involved in this field. Basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. Others in this or related fields will want the book to read the introductory material summarizing isuses common to all approaches, in order to compare and contrast different techniques. Everyday applications include electronic components and sensors, especially chemical and biosensors. There is a wide range of research and development problems requiring state-of-the-art direct write tools. This book will appeal to basic researchers and development engineers in university engineering departments and at industrial and national research laboratories. This text should appeal equally well in the United States, Asia, and Europe. Both basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. An overview of the different direct write techniques currently available A comparison between the strengths and special attributes for each of the techniques An overview of the state-of-the-art technology involved in this field
Download or read book Additive Manufacturing written by Manu Srivastava and published by CRC Press. This book was released on 2019-09-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of AM amongst scholars at graduate level, post graduate level, doctoral level, as well as industry personnel. The objective is to offer a state-of-the-art book which covers all aspects of AM and incorporates all information regarding trends, historical developments, classifications, materials, tooling, software issues, dynamic design, principles, limitations, and communication interfaces in a one-stop resource. Features: Breaks down systematic coverage of various aspects of AM within four distinct sections Contains details of various AM techniques based on ASTM guidelines Discusses many AM applications with suitable illustrations Includes recent trends in the field of AM Covers engineering materials utilized as raw materials in AM Compares AM techniques with different traditional manufacturing methods
Download or read book Materials Development for Direct Write Technologies written by Douglas B. Chrisey and published by Cambridge University Press. This book was released on 2014-06-05 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to identify and develop new materials approaches based on the direct-write technique (transfer method) and to demonstrate the required electronic or other device performances (chem/bio sensors, phosphor display, FET, etc.). Many different CAD/CAM approaches exist to direct write or transfer material patterns and each technique has its own merits and shortcomings. Many approaches are presented including plasma spray, laser particle guidance, MAPLE DW, laser CVD, micropen, inkjet, e-beam, focused ion beam, and several novel liquid or droplet microdispensing approaches. One common theme to all techniques, however, is their dependence on high-quality starting materials. In most cases, individual direct-write techniques make trade-offs between particle bonding chemistries that are amenable with the transfer process and direct-write properties such as resolution or speed. Optimized materials result in deposition of finer features, minimal process variation and lower prototyping and production costs, higher yields, greater manufacturing flexibility and reduced capital investments. Topics include: relevance of direct-write processing; powder-or droplet-based direct-write processing; laser direct-write techniques and processing; printing methods and consideration for direct-write processing.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book Materials Challenges and Testing for Manufacturing Mobility Biomedical Applications and Climate written by Werasak Udomkichdecha and published by Springer. This book was released on 2014-09-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two parts, the book focusses on materials science developments in the area of 1) Materials Data and Informatics: - Materials data quality and infrastructure - Materials databases - Materials data mining, image analysis, data driven materials discovery, data visualization. 2) Materials for Tomorrow’s Energy Infrastructure: - Pipeline, transport and storage materials for future fuels: biofuels, hydrogen, natural gas, ethanol, etc. -Materials for renewable energy technologies This book presents selected contributions of exceptional young postdoctoral scientists to the 4th WMRIF Workshop for Young Scientists, hosted by the National Institute of Standards and Technology, at the NIST site in Boulder, Colorado, USA, September 8 to September 10, 2014.
Download or read book Sensitive Skin written by Vladimir Lumelsky and published by World Scientific. This book was released on 2000-08-28 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the principles, methodology, and prototypes of sensing skin-like devices and related intelligence and software. Sensitive Skins are large-area and flexible arrays of sensors integrated onto the entire surface of machines. Sensitive Skin will endow these machines with the senses of proximity, touch, pressure, temperature, and chemical/biological agents, thus making possible the use of unsupervised machines in unstructured and unpredictable surroundings. Sensitive Skin will make machines “cautious” and thus friendly to their environment. It will revolutionize service industries, make important contributions to human prosthetics, and augment human sensing when fashioned into clothing. Being transducers producing massive data flow, Sensitive Skin devices will constitute yet another advance in the information revolution.
Download or read book 1995 Federal Research and Development Program in Materials Science and Technology written by National Science and Technology Council (U.S.). Materials Technology Subcommittee and published by . This book was released on 1995 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructuring of Glasses written by Dagmar Hülsenberg and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book that explains how to structure glass for micro- and nanophotonic applications. It deals with various glass compositions and their properties, and the interactions between glass and the electromagnetic waves used to modify it. The book also explores methods for influencing the geometrical microstructure of glass as well as methods to produce actual microdevices. It also details methods for influencing the geometrical microstructure of glasses.
Download or read book Additive Manufacturing of Structural Electronics written by Marcin Słoma and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-05-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing, also called rapid prototyping or 3D printing is a disruptive manufacturing technique with a significant impact in electronics. With 3D printing, bulk objects with circuitry are embedded in the volume of an element or conformally coated on the surface of existing parts, allowing design and manufacturing of smaller and lighter products with fast customisation. The book covers both materials selection and techniques. The scope also covers the research areas of additive manufacturing of passive and active components, sensors, energy storage, bioelectronics and more.
Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resilient Hybrid Electronics for Extreme Harsh Environments written by Amanda Schrand and published by CRC Press. This book was released on 2024-06-06 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of future innovative technology relies upon a community with a shared vision. Here, we present an overview of the latest technological progress in the field of printed electronics for use in harsh or extreme environments. Each chapter unlocksscientific and engineering discoveries that will undoubtedly lead to progression from proof of concept to device creation. The main topics covered in this book include some of the most promising materials, methods, and the ability to integrate printed materials with commercial components to provide the basis for the next generation of electronics that are dubbed “survivable” in environments with high g‐orces, corrosion, vibration, and large temperature fluctuations. A wide variety of materials are discussed that contribute to robust hybrid electronics, including printable conductive composite inks, ceramics and ceramic matrix composites, polymer‐erived ceramics, thin metal films, elastomers, solders and epoxies, to name a few. Collectively, these materials and associated components are used to construct conductive traces, interconnects, antennas, pressure sensors, temperature sensors, power inducting devices, strain sensors and gauges, soft actuators, supercapacitors, piezo ionic elements, resistors, waveguides, filters, electrodes, batteries, various detectors, monitoring devices, transducers, and RF systems and graded dielectric, or graded index (GRIN) structures. New designs that incorporate the electronics as embedded materials into channels, slots and other methods to protect the electronics from the extreme elements of the operational environment are also envisioned to increase their survivability while remaining cognizant of the required frequency of replacement, reapplication and integration of power sources. Lastly, the ability of printer manufacturers, software providers and users to work together to build multi‐axis, multi‐material and commercial‐off‐the‐shelf (COTS) integration into user‐friendly systems will be a great advancement for the field of printed electronics. Therefore, the blueprint for manufacturing resilient hybrid electronics consists of novel designs that exploit the benefits of advances in additive manufacturing that are then efficiently paired with commercially available components to produce devices that exceed known constraints. As a primary example, metals can be deposited onto polymers in a variety of ways, including aerosol jetting, microdispensing, electroplating, sintering, vacuum deposition, supersonic beam cluster deposition, and plasma‐based techniques, to name a few. Taking these scientific discoveries and creatively combining them into robotic, multi‐material factories of the future could be one shared aim of the printed electronics community toward survivable device creation.
Download or read book Additive Manufacturing and Strategic Technologies in Advanced Ceramics written by Kiyoshi Shimamura and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Additive Manufacturing Technologies Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications Multifunctional Coatings for Energy and Environmental Applications Novel, Green, and Strategic Processing and Manufacturing Technologies Powder Processing Technology for Advanced Ceramics Computational Design and Modeling Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Download or read book Advances in Solid Oxide Fuel Cells VI written by Prabhakar Singh and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Seventh International Symposium on Solid Oxide Fuel Cells (SOFC): Materials, Science, and Technology was held during the 34th International Conference and Exposition on Advanced Ceramics and Composites in Daytona Beach, FL, January 24 to 29, 2010. This symposium provided an international forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on various aspects of solid oxide fuel cells. A total of 75 papers were presented in the form of oral and poster presentations, including ten invited lectures, indicating strong interest in the scientifically and technologically important field of solid oxide fuel cells. Authors from eleven countries (China, Denmark, Germany India, Italy, Japan, Russia, South Korea, Taiwan, UK and U.S.A.) participated. The speakers represented universities, industries, and government research laboratories. These proceedings contain contributions on various aspects of solid oxide fuel cells that were discussed at the symposium. Fifteen papers describing the current status of solid oxide fuel cells technology are included in this volume.
Download or read book Microchemical Engineering in Practice written by Thomas Dietrich and published by John Wiley & Sons. This book was released on 2011-11-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microchemical Engineering in Practice provides the information chemists and engineers need to evaluate the use of microreactors, covering the technical, operational, and economic considerations for various applications. It explains the systems needed to use microreactors in production and presents examples of microreactor use in different chemistries, including larger scale production processes. There are guidelines on calculating the costs and the risks of production using continuous flow microreactors. Complete with case studies, this is an essential guide for chemists and engineers interested in investigating the advantages of chemical microreactors.
Download or read book Laser and Ion Beam Modification of Materials written by I. Yamada and published by Elsevier. This book was released on 2013-10-22 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Ion Beam Modification of Materials is a compilation of materials from the proceedings of the symposium U: Material Synthesis and Modification by Ion beams and Laser Beams. This collection discusses the founding of the KANSAI Science City in Japan, and the structures, equipment, and research projects of two institutions are discussed pertaining to eV-MeV ion beams. A description of ion beams as used in materials research and in manufacturing processes, along with trends in ion implantation technology in semiconductors, is discussed. Research into ion beams by China and its industrial uses in non-semiconductor area is noted. For industrial applications, developing technology in terms of high speed, large surface modifications and use of high doses is important. Thus, the development of different ion beam approaches is examined. Industrial applications of ion and laser processing are discussed as cluster beams are used in solid state physics and chemistry. Mention is made on a high power discharge pumped solid state physics (ArF) excimer laser as a potential light source for better material processing. Under ion beam material processing is nanofabrication using focused ion beams, important for research work in mesoscopic systems. Progress in the use of ion-beam mixing using kinetic energy of ion-beams to mingle with pre-deposited surface layers of substrate materials has shown promise. Advanced materials researchers and scientists, as well as academicians in the field of nuclear physics, will find this collection helpful.