Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Plasticity and Creep of Metals written by Andrew Rusinko and published by Springer Science & Business Media. This book was released on 2011-07-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.

Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. - Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites - Puts a specific focus on viscoelastic and viscoplastic modeling - Features the time-temperature-age superposition principle for predicting long-term response - Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases

Download or read book Creep Mechanics written by Josef Betten and published by Springer Science & Business Media. This book was released on 2008-08-17 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simplest way to formulate the basic equations of continuum mech- ics and the constitutive or evolutional equations of various materials is to restrict ourselves to rectangular cartesian coordinates. However, solving p- ticular problems, for instance in Chapter 5, it may be preferable to work in terms of more suitable coordinate systems and their associated bases. The- fore, Chapter 2 is also concerned with the standard techniques of tensor an- ysis in general coordinate systems. Creep mechanics is a part of continuum mechanics, like elasticity or pl- ticity. Therefore, some basic equations of continuum mechanics are put - gether in Chapter 3. These equations can apply equally to all materials and they are insuf?cient to describe the mechanical behavior of any particular material. Thus, we need additional equations characterizing the individual material and its reaction under creep condition according to Chapter 4, which is subdivided into three parts: the primary, the secondary, and the tertiary creep behavior of isotropic and anisotropic materials. The creep behavior of a thick-walled tube subjected to internal pressure is discussed in Chapter 5. The tube is partly plastic and partly elastic at time zero. The investigation is based upon the usual assumptions of incompre- ibility and zero axial creep. The creep deformations are considered to be of such magnitude that the use of ?nite-strain theory is necessary. The inner and outer radius, the stress distributions as functions of time, and the cre- failure time are calculated.

Download or read book Creep and Fracture of Engineering Materials and Structures written by T. Sakuma and published by Trans Tech Publications Ltd. This book was released on 1999-10-12 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 8th International Conference on Creep and Fracture of Engineering Materials and Structures, held in Tsukuba, Japan, November 1-5, 1999

Download or read book High Temperature Deformation and Fracture of Materials written by Jun-Shan Zhang and published by Elsevier. This book was released on 2010-09-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy, petrochemical, aerospace and other industries all require materials able to withstand high temperatures. High temperature strength is defined as the resistance of a material to high temperature deformation and fracture. This important book provides a valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life. - Analyses creep behaviour of materials, the evolution of dislocation substructures during creep, dislocation motion at elevated temperatures and importantly, recovery-creep theories of pure metals - Examines high temperature fracture, including nucleation of creep cavity, diffusional growth and constrained growth of creep cavities - A valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life

Download or read book Creep of Crystals written by Jean-Paul Poirier and published by Cambridge University Press. This book was released on 1985-02-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the physics of the plastic deformation of solids at high temperatures. It is directed at geologists or geophysicists interested in the high-temperature behaviour of crystals who wish to become acquainted with the methods of materials science in so far as they are useful to earth scientists. It explains the most important models and recent experimental results without losing the reader in the primary literature of materials science. In turn the book deals with the essential solid-state physics; thermodynamics and hydrostatics of creep; creep models and their applications in the geological sciences; diffusion creep; superplastic deformation and deformation enhanced by phase transformations. Five concluding chapters give experimental results for metals, ceramics and minerals. There are extensive bibliographies to aid further study.

Download or read book Creep and Relaxation of Nonlinear Viscoelastic Materials written by William N. Findley and published by Courier Corporation. This book was released on 2013-01-15 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering book presents the basic theory, experimental methods, experimental results and solution of boundary value problems in a readable, useful way to designers as well as research workers and students. The mathematical background required has been kept to a minimum and supplemented by explanations where it has been necessary to introduce specialized mathematics. Also, appendices have been included to provide sufficient background in Laplace transforms and in step functions. Chapters 1 and 2 contain an introduction and historic review of creep. As an aid to the reader a background on stress, strain, and stress analysis is provided in Chapters 3 and 4, an introduction to linear viscoelasticity is found in Chapter 5 and linear viscoelastic stress analysis in Chapter 6. In the next six chapters the multiple integral representation of nonlinear creep and relaxation, and simplifications to single integral forms and incompressibility, are examined at length. After a consideration of other representations, general relations are derived, then expanded to components of stress or strain for special cases. Both constant stress (or strain) and variable states are described, together with methods of determining material constants. Conversion from creep to relaxation, effects of temperature and stress analysis problems in nonlinear materials are also treated here. Finally, Chapter 13 discusses experimental methods for creep and stress relaxation under combined stress. This chapter considers especially those experimental problems which must be solved properly when reliable experimental results of high precision are required. Six appendices present the necessary mathematical background, conversion tables, and more rigorous derivations than employed in the text. An extensive updated bibliography completes the book.

Download or read book The Engineer s Guide to Materials written by K. T. Voisey and published by Springer Nature. This book was released on with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanostructured Materials written by Gerhard Wilde and published by Elsevier. This book was released on 2009-12-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on functional aspects of nanostructured materials that have a high relevance to immediate applications, such as catalysis, energy harvesting, energy storage, optical properties and surface functionalization via self-assembly. Additionally, there are chapters devoted to massive nanostructured materials and composites and covering basic properties and requirements of this new class of engineering materials. Especially the issues concerning stability, reliability and mechanical performance are mandatory aspects that need to be regarded carefully for any nanostructured engineering material.

Download or read book ENGINEERING MATERIALS written by A. K. BHARGAVA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-07-24 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, now in its second edition, continues to provide a balanced practical treatment of polymers, ceramics, and composites, covering all their physical properties as well as applications in industry. The text puts emphasis on developing an understanding of properties, characteristics and specifications of non-metallic engineering materials and focusing on the techniques for controlling their properties during processing. It provides students with the knowledge they need to make optimal selection and use of these materials in a variety of manufacturing applications. The book focuses on structure-properties correlation of materials as it forms the basis for predicting their behaviour during processing and service conditions. The text also discusses the recently developed advanced materials. Each chapter includes the questions of fundamental importance and industrial significance, along with their answers. This book is especially designed for Metallurgical and Materials Science students for a course in non-metallic engineering materials. Besides it should prove useful for the students of other engineering disciplines where materials science/materials engineering is offered as a compulsory course. NEW TO THIS EDITION : Addition of a new chapter on Ceramics—A Material for Biomedical Applications (Chapter 5) Inclusion of a number of questions and their answers in Chapters 2, 3 and 4, modifications of existing figures and the inclusion of new ones. Incorporation of plenty of numerical problem related to polymers, ceramics and composites.

Download or read book Materials and the Designer written by E. H. Cornish and published by Cambridge University Press. This book was released on 1987 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable reference for product designers to use in choosing the optimum material for an engineering design is provided through this comprehensive introduction to the methods of selection methodology.

Download or read book Understanding Materials Science written by Rolf E. Hummel and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction for engineers examines not only the physical properties of materials, but also their history, uses, development, and some of the implications of resource depletion and materials substitutions.

Download or read book Fundamentals of Materials Science for Technologists written by Larry Horath and published by Waveland Press. This book was released on 2019-05-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The properties of materials provide key information regarding their appropriateness for a product and how they will function in service. The Third Edition provides a relevant discussion and vital examples of the fundamentals of materials science so that these details can be applied in real-world situations. Horath effectively combines principles and theory with practical applications used in today's machines, devices, structures, and consumer products. The basic premises of materials science and mechanical behavior are explored as they relate to all types of materials: ferrous and nonferrous metals; polymers and elastomers; wood and wood products; ceramics and glass; cement, concrete, and asphalt; composites; adhesives and coatings; fuels and lubricants; and smart materials. Valuable and insightful coverage of the destructive and nondestructive evaluation of material properties builds the groundwork for inspection processes and testing techniques, such as tensile, creep, compression, shear, bend or flexure, hardness, impact, and fatigue. Laboratory exercises and reference materials are included for hands-on learning in a supervised environment, which promotes a perceptive understanding of why we study and test materials and develop skills in industry-sanctioned testing procedures, data collection, reporting and graphing, and determining additional appropriate tests.

Download or read book Engineering Physics of High Temperature Materials written by Nirmal K. Sinha and published by John Wiley & Sons. This book was released on 2022-02-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: ENGINEERING PHYSICS OF HIGH-TEMPERATURE MATERIALS Discover a comprehensive exploration of high temperature materials written by leading materials scientists In Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics distinguished researchers and authors Nirmal K. Sinha and Shoma Sinha deliver a rigorous and wide-ranging discussion of the behavior of different materials at high temperatures. The book discusses a variety of physical phenomena, from plate tectonics and polar sea ice to ice-age and intraglacial depression and the postglacial rebound of Earth’s crust, stress relaxation at high temperatures, and microstructure and crack-enhanced Elasto Delayed Elastic Viscous (EDEV) models. At a very high level, Engineering Physics of High-Temperature Materials (EPHTM) takes a multidisciplinary view of the behavior of materials at temperatures close to their melting point. The volume particularly focuses on a powerful model called the Elasto-Delayed-Elastic-Viscous (EDEV) model that can be used to study a variety of inorganic materials ranging from snow and ice, metals, including complex gas-turbine engine materials, as well as natural rocks and earth formations (tectonic processes). It demonstrates how knowledge gained in one field of study can have a strong impact on other fields. Engineering Physics of High-Temperature Materials will be of interest to a broad range of specialists, including earth scientists, volcanologists, cryospheric and interdisciplinary climate scientists, and solid-earth geophysicists. The book demonstrates that apparently dissimilar polycrystalline materials, including metals, alloys, ice, rocks, ceramics, and glassy materials, all behave in a surprisingly similar way at high temperatures. This similarity makes the information contained in the book valuable to all manner of physical scientists. Readers will also benefit from the inclusion of: A thorough introduction to the importance of a unified model of high temperature material behavior, including high temperature deformation and the strength of materials An exploration of the nature of crystalline substances for engineering applications, including basic materials classification, solid state materials, and general physical principles Discussions of forensic physical materialogy and test techniques and test systems Examinations of creep fundamentals, including rheology and rheological terminology, and phenomenological creep failure models Perfect for materials scientists, metallurgists, and glaciologists, Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics will also earn a place in the libraries of specialists in the nuclear, chemical, and aerospace industries with an interest in the physics and engineering of high-temperature materials.

Download or read book Light Metals 2017 written by Arne P. Ratvik and published by Springer. This book was released on 2017-02-10 with total page 1385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2017 collection includes papers from the following symposia:Alumina and BauxiteAluminum Alloys, Processing, and CharacterizationAluminum Reduction TechnologyCast Shop TechnologyCast Shop Technology: Recycling and Sustainability Joint SessionElectrode TechnologyThe Science of Melt Refining: An LMD Symposium in Honor of Christian Simensen and Thorvald Abel Engh

Download or read book Reliability of Materials for Solar Energy Summary and recommendations written by and published by . This book was released on 1979 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: