Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.

Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.

Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites

Download or read book Reliability and Materials Issues of III V and II VI Semiconductor Optical and Electron Devices and Materials II Volume 1432 written by Osamu Ueda and published by Materials Research Society. This book was released on 2012-08-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium G, "Reliability and Materials Issues of III-V and II-VI Semiconductor Optical and Electron Devices and Materials II," was held April 9-13 at the 2012 MRS Spring Meeting in San Francisco, California. Achieving high reliability is a key issue for semiconductor optical and electrical devices and is as important as device performance for commercial application. Degradation of both optical and electrical devices is strongly related to the materials issues. A variety of material defects can occur during the device fabrication processes, i.e., crystal growth, impurity diffusion, ion-implantation, wet/dry etching, metallization, bonding, packaging, etc. This symposium presented state-of-the-art results on reliability and degradation of various semiconductor optical and electrical devices as well as their materials issues in thin-film growth, wafer processing, and device fabrication processes.

Download or read book Reliability of Semiconductor Lasers and Optoelectronic Devices written by Robert Herrick and published by Woodhead Publishing. This book was released on 2021-03-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability of Semiconductor Lasers and Optoelectronic Devices simplifies complex concepts of optoelectronics reliability with approachable introductory chapters and a focus on real-world applications. This book provides a brief look at the fundamentals of laser diodes, introduces reliability qualification, and then presents real-world case studies discussing the principles of reliability and what occurs when these rules are broken. Then this book comprehensively looks at optoelectronics devices and the defects that cause premature failure in them and how to control those defects. Key materials and devices are reviewed including silicon photonics, vertical-cavity surface-emitting lasers (VCSELs), InGaN LEDs and lasers, and AlGaN LEDs, covering the majority of optoelectronic devices that we use in our everyday lives, powering the Internet, telecommunication, solid-state lighting, illuminators, and many other applications. This book features contributions from experts in industry and academia working in these areas and includes numerous practical examples and case studies. This book is suitable for new entrants to the field of optoelectronics working in R&D. • Includes case studies and numerous examples showing best practices and common mistakes affecting optoelectronics reliability written by experts working in the industry • Features the first wide-ranging and comprehensive overview of fiber optics reliability engineering, covering all elements of the practice from building a reliability laboratory, qualifying new products, to improving reliability on mature products. • Provides a look at the reliability issues and failure mechanisms for silicon photonics, VCSELs, InGaN LEDs and lasers, AIGaN LEDs, and more.

Download or read book Semiconductor Reliability Handbook written by Sharp Corporation and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Laser Diode Reliability written by Massimo Vanzi and published by Elsevier. This book was released on 2021-07-24 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Laser Diode Reliability focuses on causes and effects of degradations of state-of-the-art semiconductor laser diodes. It aims to provide a tool for linking practical measurements to physical diagnostics. To this purpose, it reviews the current technologies, addressing their peculiar details that can promote specific failure mechanisms. Two sections will support this kernel: a) Failure Analysis techniques, procedures and examples; b) Device-oriented laser modelling and parameter extraction. Talk about Natural continuity with the most widespread existing textbooks, published by Mitsuo Fukuda Present the extension to new failure mechanisms, new technologies, new application fields, new environments Introduce a specific self-consistent model for the physical description of a laser diode, expressed in terms of practically measurable quantities

Download or read book Single Crystals of Electronic Materials written by Roberto Fornari and published by Woodhead Publishing. This book was released on 2018-09-18 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single Crystals of Electronic Materials: Growth and Properties is a complete overview of the state-of-the-art growth of bulk semiconductors. It is not only a valuable update on the body of information on crystal growth of well-established electronic materials, such as silicon, III-V, II-VI and IV-VI semiconductors, but also includes chapters on novel semiconductors, such as wide bandgap oxides like ZnO, Ga2, O3, In2, O3, Al2, O3, nitrides (AIN and GaN), and diamond. Each chapter focuses on a specific material, providing a comprehensive overview that includes applications and requirements, thermodynamic properties, schematics of growth methods, and more. Presents the latest research and most comprehensive overview of both standard and novel semiconductors Provides a systematic examination of important electronic materials, including their applications, growth methods, properties, technologies and defect and doping issues Takes a close look at emerging materials, including wide bandgap oxides, nitrides and diamond

Download or read book Electron Lattice Interactions in Semiconductors written by Yuzo Shinozuka and published by CRC Press. This book was released on 2021-03-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical treatments on various electronic and atomic processes in non-metallic materials from a unified point of view. It starts with the basic properties of semiconductors, treating the system as a macroscopic association of electrons and ions. In their ground state, fruitful results are derived, such as the band theory for electrons in a periodic lattice and a useful concept of “hole.” The electron–lattice interaction is then introduced as a dynamical response of condensed matter when it is electronically excited. With the aid of proper configuration coordinate diagrams, various phenomena are precisely examined, including carrier scattering, polaron formation, lattice relaxation, Stokes shift and phonon side band in optical spectrum, intrinsic and extrinsic self-trapping, and structural changes. The book provides readers a deep understanding of the physics underlying these phenomena and excellent insight to develop their further research. Graduate students who have finished the basic study on solid-state physics and quantum mechanics and research scientists and engineers in materials science and engineering will benefit immensely from it.

Download or read book Handbook of Emerging Materials for Semiconductor Industry written by Young Suh Song and published by Springer Nature. This book was released on with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heteroepitaxy of Semiconductors written by John E. Ayers and published by CRC Press. This book was released on 2016-10-03 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past ten years, heteroepitaxy has continued to increase in importance with the explosive growth of the electronics industry and the development of a myriad of heteroepitaxial devices for solid state lighting, green energy, displays, communications, and digital computing. Our ever-growing understanding of the basic physics and chemistry underlying heteroepitaxy, especially lattice relaxation and dislocation dynamic, has enabled an ever-increasing emphasis on metamorphic devices. To reflect this focus, two all-new chapters have been included in this new edition. One chapter addresses metamorphic buffer layers, and the other covers metamorphic devices. The remaining seven chapters have been revised extensively with new material on crystal symmetry and relationships, III-nitride materials, lattice relaxation physics and models, in-situ characterization, and reciprocal space maps.

Download or read book Physics of Semiconductor Devices written by V. K. Jain and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this workshop is to spread the vast amount of information available on semiconductor physics to every possible field throughout the scientific community. As a result, the latest findings, research and discoveries can be quickly disseminated. This workshop provides all participating research groups with an excellent platform for interaction and collaboration with other members of their respective scientific community. This workshop’s technical sessions include various current and significant topics for applications and scientific developments, including • Optoelectronics • VLSI & ULSI Technology • Photovoltaics • MEMS & Sensors • Device Modeling and Simulation • High Frequency/ Power Devices • Nanotechnology and Emerging Areas • Organic Electronics • Displays and Lighting Many eminent scientists from various national and international organizations are actively participating with their latest research works and also equally supporting this mega event by joining the various organizing committees.

Download or read book Fiber Bragg Grating Based Sensors and Systems written by Oleg Morozov and published by MDPI. This book was released on 2021-08-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers that originated as a Special Issue, focused on some recent advances related to fiber Bragg grating-based sensors and systems. Conventionally, this book can be divided into three parts: intelligent systems, new types of sensors, and original interrogators. The intelligent systems presented include evaluation of strain transition properties between cast-in FBGs and cast aluminum during uniaxial straining, multi-point strain measurements on a containment vessel, damage detection methods based on long-gauge FBG for highway bridges, evaluation of a coupled sequential approach for rotorcraft landing simulation, wearable hand modules and real-time tracking algorithms for measuring finger joint angles of different hand sizes, and glaze icing detection of 110 kV composite insulators. New types of sensors are reflected in multi-addressed fiber Bragg structures for microwave–photonic sensor systems, its applications in load-sensing wheel hub bearings, and more complex influence in problems of generation of vortex optical beams based on chiral fiber-optic periodic structures. Original interrogators include research in optical designs with curved detectors for FBG interrogation monitors; demonstration of a filterless, multi-point, and temperature-independent FBG dynamical demodulator using pulse-width modulation; and dual wavelength differential detection of FBG sensors with a pulsed DFB laser.

Download or read book Ionizing Radiation Effects and Applications written by Boualem Djezzar and published by BoD – Books on Demand. This book was released on 2018-03-28 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The benefits of ionizing radiations have been largely demonstrated through many achievements of human life. Understanding the fundamental elementary interactions of ionizing radiations with material has allowed the development of various applications needed by different industries. This book draws some facets of their applications, such as hardening process for semiconductor devices, biomedical imaging by radiation luminescent quantum dots, hydrogen gas detection by Raman lidar sensor for explosion risk assessment, water and wastewater purification by radiation treatment for environment, doping by the neutron transmutation doping for the semiconductor industry, and polymerization by irradiation, which is useful for industries requiring resistant and protective coating. I wish the chapters of this book can provide some helpful information on ionizing radiation applications.

Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 3082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Future Directions in Silicon Photonics written by and published by Academic Press. This book was released on 2019-08-16 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future Directions in Silicon Photonics, Volume 101 in the Semiconductors and Semimetals series, highlights new advances in the field, with this updated volume presenting the latest developments as discussed by esteemed leaders in the field silicon photonics. Provides the authority and expertise of leading contributors from an international board of authors Represents the latest release in the Semiconductors and Semimetals series Includes the latest information on Silicon Photonics