Download or read book Mass Production and Cost written by 佘其英 and published by . This book was released on 1957 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Build to order Mass Customization written by David M. Anderson and published by . This book was released on 2004 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Mass Production written by Yijiang Wang and published by . This book was released on 1992 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Cost Trends of Mass Production as Applied to 5 10 Psi Shelters written by Charles Curione and published by . This book was released on 1967 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the study was to determine the cost reduction potential of mass production techniques applied to 5-10 PSI shelter construction programs. Various industries employing mass production methods in the manufacture of structures or structural components were invited to provide comments pertinent to this research. Reports and studies covering shelter costs were reviewed, and applicable cost data were integrated into the report. The findings of this research indicate that some cost reduction can be achieved by use of mass production techniques where such techniques are applied to shelter construction. However, mass production does not always achieve the magnitude of cost reduction that one might expect from this technique. (Author).
Download or read book Mass Production Processes written by Anil Akdogan and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mass Production of Beneficial Organisms written by Juan A. Morales-Ramos and published by Academic Press. This book was released on 2022-09-20 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass Production of Beneficial Organisms: Invertebrates and Entomopathogens, Second Edition explores the latest advancements and technologies for large-scale rearing and manipulation of natural enemies while presenting ways of improving success rate, predictability of biological control procedures, and demonstrating their safe and effective use. Organized into three sections, Parasitoids and Predators, Pathogens, and Invertebrates for Other Applications, this second edition contains important new information on production technology of predatory mites and hymenopteran parasitoids for biological control, application of insects in the food industry and production methods of insects for feed and food, and production of bumble bees for pollination.Beneficial organisms include not only insect predators and parasitoids, but also mite predators, nematodes, fungi, bacteria and viruses. In the past two decades, tremendous advances have been achieved in developing technology for producing these organisms. Despite that and the globally growing research and interest in biological control and biotechnology applications, commercialization of these technologies is still in progress. This is an essential reference and teaching tool for researchers in developed and developing countries working to produce “natural enemies in biological control and integrated pest management programs. Highlights the most advanced and current techniques for mass production of beneficial organisms and methods of evaluation and quality assessment Presents methods for developing artificial diets and reviews the evaluation and assurance of the quality of mass-produced arthropods Provides an outlook of the growing industry of insects as food and feed and describes methods for mass producing the most important insect species used as animal food and food ingredients
Download or read book From the American System to Mass Production 1800 1932 written by David Hounshell and published by JHU Press. This book was released on 1984 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Houndshell's widely acclaimed history explores the American "genius for mass production" and races its origins in the nineteenth-century "American system" of manufacture. Previous writers on the American system have argued that the technical problems of mass production had been solved by armsmakers before the Civil War. Drawing upon the extensive business and manufacturing records if leading American firms, Hounshell demonstrates that the diffusion of arms production technology was neither as fast now as smooth as had been assumed. Exploring the manufacture of sewing machines and furniture, bicycles and reapers, he shows that both the expression "mass production" and the technology that lay behind it were developments of the twentieth century, attributable in large part to the Ford Motor Company. Hounshell examines the importance of individuals in the diffusion and development of production technology and the central place of marketing strategy in the success of selected American manufacturers. Whereaas Ford was the seedbed of the assembly line revolution, it was General motors that initiated a new era with its introduction of the annual model change. With the new marketing strategy, the technology of "the changeover" became of paramount importance. Hounshell chronicles how painfully Ford learned this lesson and recounts how the successful mass production of automobiles led to the establishment of an "ethos of mass production," to an era in which propoments of "Fordism" argued that mass production would solve all of America's social problems.
Download or read book Summary of Cost Trends of Mass Production as Applied to 5 10 PSI Shelters written by Charles Curione and published by . This book was released on 1967 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this study was to determine the cost reduction potential of mass production techniques applied to 5-10 PSI shelter construction programs. Various industries employing mass production methods in the manufacture of structures or structural components were invited to provide comments pertinent to this research. Reports and studies covering shelter costs were reviewed, and applicable cost data were integrated into this report. The findings of this research indicate that some cost reduction can be achieved by use of mass production techniques where such techniques are applied to shelter construction. However, mass production does not always achieve the magnitude of cost reduction that one might expect from this technique.
Download or read book Mass Production and the Tariff written by Edward Albert Filene and published by . This book was released on 1929 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mass Customization Versus Mass Production written by Aydin Alptekinoglu and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study competition between two multi-product firms with distinct production technologies in a market where customers have heterogeneous preferences on a single taste attribute. The mass customizer (MC) has a perfectly flexible production technology, thus can offer any variety within a product space, represented by Hotelling's (1929) linear city. The mass producer (MP) has a more focused production technology, and therefore, it offers a finite set of products in the same space. MP can invest in more flexible technology, which reduces its cost of variety and hence allows it to offer a larger set of products; in the extreme,MP can emulate MC's technology and offer infinite variety. The firms simultaneously decide whether to enter the market, and MP chooses its degree of product-mix flexibility upon entry. Next, MP designs its product line, i.e., the number and position of its products; MC's perfectly flexible technology makes this unnecessary. Finally, both firms simultaneously set prices. We analyze the sub-game perfect Nash equilibrium in this three-stage game, allowing firm-specific fixed and variable costs that together characterize their production technology. We find that an MP facing competition from an MC offers lower product variety compared to an MP monopolist, in order to reduce the intensity of price competition. We also find that MP can survive this competition even if it has higher fixed cost of production technology or higher marginal cost of production or both.
Download or read book Introduction to Business written by Lawrence J. Gitman and published by . This book was released on 2018 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Business covers the scope and sequence of most introductory business courses. The book provides detailed explanations in the context of core themes such as customer satisfaction, ethics, entrepreneurship, global business, and managing change. Introduction to Business includes hundreds of current business examples from a range of industries and geographic locations, which feature a variety of individuals. The outcome is a balanced approach to the theory and application of business concepts, with attention to the knowledge and skills necessary for student success in this course and beyond.
Download or read book Design for Manufacturability Concurrent Engineering written by David M. Anderson and published by . This book was released on 2003 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Economics of Made to Order Production written by Thomas R. Gulledge and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: The airframe industry is usually recognized as being different from most manufacturing industries. These differences, which are characterized by the number of units produced and the frequency of design changes, have been evident for many years. This uniqueness and the corresponding implications for cost estimation became particularly evident during World War II. The aircraft industry generally has been considered unique in that it differs from other manufacturing in the quantity of units manufactured and with the frequency with which changes are made during the course of manufacturing operations. In mass-production industries, manufacturing thousands or hundreds of thousands of identical units, methods and cost of production tend to remain fairly constant after production has been stabilized, whereas in the aircraft industry, method improvements are constantly being made and cost is a variable depending on the number of airplanes being manufactured (Berghell, 1944). These differences, coupled with political considerations, place unusual demands on cost modelers. This has been particularly true in recent years where large cost overruns have generated Congressional demands for better cost estimates. Traditionally, cost estimators in the airframe industry have used one or more of the following estimating techniques: 1. industrial engineering time standards, 2. parametric cost estimating models, 3. learning curves. All of the methods have been used with mixed results in specific situations. The general emphasis of all three approaches is cost estimation for planning purposes prior to beginning production, although some of the techniques may be used during the production phase of a program.
Download or read book Design Secrets for Mass Production written by 陳正倫(John Chen) and published by 陳正倫 John Chen. This book was released on 2020-10-14 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: By reading this book thoroughly: 1. You can rectify incorrect concepts as early as possible; after all, if you do it right in the first place, you will always get it right. 2. You will significantly reduce the number of times of modification, the time for repeated design modifications, as well as production and tooling modification costs. 3. You, as an inexperienced designer, can enhance your own skills without solely relying on experienced ones’ guidance. 4. You, as an experienced designer, will be enlightened at the right time to integrate your own design experience without wasting time on repetitive trials and errors. 5. You, as a design supervisor, can adopt this book as a reference for the development of internal education and training as well as design guidelines to increase design efficiency in your department. 6. You, as a project manager, can anticipate design defects and remind designers to respond in time to improve the overall product development efficiency.
Download or read book Mass production Management written by Ray Wild and published by . This book was released on 1972 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Make or buy Decisions in Tooling for Mass Production written by William Andrew Paton and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
