Download or read book MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT written by Thomas E. Vollmann and published by McGraw Hill Professional. This book was released on 2004-08-20 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Planning and Control Systems for Supply Chain Management is both the classic field handbook for manufacturing professionals in virtually any industry and the standard preparatory text for APICS certification courses. This essential reference has been totally revised and updated to give professionals the knowledge they need.
Download or read book MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT written by Thomas E. Vollmann and published by McGraw-Hill Companies. This book was released on 2005 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic field handbook for the manufacturing professional has been revised to reflect many important changes in the manufacturing field including the pervasiveness of ERP systems and the continuing decentralization of decision making to the factory floor.
Download or read book Manufacturing Planning and Control Systems written by Thomas E. Vollmann and published by McGraw-Hill/Irwin. This book was released on 1997 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you're studying for the APICS certification examination or looking for ways to improve your existing manufacturing process, Manufacturing Planning and Control Systems, Fourth Edition, is the resource to turn to.
Download or read book Operations Logistics and Supply Chain Management written by Henk Zijm and published by Springer. This book was released on 2018-08-29 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of important trends and developments in logistics and supply chain research, making them available to practitioners, while also serving as a point of reference for academicians. Operations and logistics are cornerstones of modern supply chains that in turn are essential for global business and economics. The composition, character and importance of supply chains and networks are rapidly changing, due to technological innovations such as Information and Communication Technologies, Sensors and Robotics, Internet of Things, and Additive Manufacturing, to name a few (often referred to as Industry 4.0). Societal developments such as environmental consciousness, urbanization or the optimal use of scarce resources are also impacting how supply chain networks are configured and operated. As a result, future supply chains will not just be assessed in terms of cost-effectiveness and speed, but also the need to satisfy agility, resilience and sustainability requirements. To face these challenges, an understanding of the basic as well as more advanced concepts and recent innovations is essential in building competitive and sustainable supply chains and, as part of that, logistics and operations. These span multiple disciplines and geographies, making them interdisciplinary and international. Therefore, this book contains contributions and views from a variety of experts from multiple countries, and combines management, engineering as well as basic information technology and social concepts. In particular, it aims to: provide a comprehensive guide for all relevant and major logistics, operations, and supply chain management topics in teaching and business practice address three levels of expertise, i.e., concepts and principles at a basic (undergraduate, BS) level, more advanced topics at a graduate level (MS), and finally recent (state-of-the-art) developments at a research level. In particular the latter serve to present a window on current and future (potential) logistics innovations in the different thematic fields for both researchers and top business practitioners integrate a textbook approach with matching case studies for effective teaching and learning discuss multiple international perspectives in order to represent adequately the true global nature of operations, logistics and supply chains.
Download or read book Production Planning and Control for Semiconductor Wafer Fabrication Facilities written by Lars Mönch and published by Springer Science & Business Media. This book was released on 2012-09-12 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last fifty-plus years, the increased complexity and speed of integrated circuits have radically changed our world. Today, semiconductor manufacturing is perhaps the most important segment of the global manufacturing sector. As the semiconductor industry has become more competitive, improving planning and control has become a key factor for business success. This book is devoted to production planning and control problems in semiconductor wafer fabrication facilities. It is the first book that takes a comprehensive look at the role of modeling, analysis, and related information systems for such manufacturing systems. The book provides an operations research- and computer science-based introduction into this important field of semiconductor manufacturing-related research.
Download or read book Production Planning and Control written by D.R. Kiran and published by Butterworth-Heinemann. This book was released on 2019-06-18 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study. - Uses practical examples from the industry to clearly illustrate the concepts presented - Provides a basic overview of statistics to accompany the introduction to forecasting - Covers the relevance of PP&C to key emerging themes in manufacturing technology, including the Industrial Internet of Things and Industry 4
Download or read book Manufacturing Planning and Control for Supply Chain Management written by Thomas E. Vollmann and published by Irwin/McGraw-Hill. This book was released on 2005 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vollman, Berry, Whybark and Jacobs', Manufacturing Planning & Control Systems, 5/e provides comprehensive real world based coverage of the concepts, tools, and methods used to manage and control manufacturing systems. This major revision contains four entirely new chapters and four thoroughly upgraded to nearly original content. ERP system coverage and the impact of them in the field is covered now in a new introductory chapter (4) as well as being integrated heavily into many other chapters from Sales and Operations Planning (3) to Advanced Scheduling Systems (16).
Download or read book Manufacturing Planning and Control Systems written by Thomas E. Vollmann and published by Irwin Professional Publishing. This book was released on 1992 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effective Resource Management in Manufacturing Systems written by Massimiliano Caramia and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems, regardless of their size, have to work with scarce resources in dynamic environments. Effective Resource Management in Manufacturing Systems aims to provide methods for achieving effective resource allocation and to solve related problems that occur daily and often generate cost overruns. This book will be bought by postgraduate students of business, engineering and computer science as well as researchers in these fields. It will also be of interest to practitioners in manufacturing systems and operations managers in industry.
Download or read book Manufacturing Planning and Control for Supply Chain Management written by F. Robert Jacobs and published by McGraw Hill Professional. This book was released on 2011-05-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to manufacturing planning and control--FULLY REVISED AND UPDATED FOR THE CPIM EXAM Improve supply chain effectiveness, productivity, customer satisfaction, and profitability with help from this authoritative resource. Completely up-to-date, Manufacturing Planning and Control for Supply Chain Management: APICS/CPIM Certification Edition offers comprehensive preparation for the challenging CPIM exam with hundreds of practice exam questions and detailed case studies. In-depth coverage of manufacturing planning and control (MPC) best practices and the latest research gives you the competitive advantage in today's global manufacturing environment, and helps you to obtain the coveted CPIM designation. Covers the state of the art in manufacturing, including: Manufacturing planning and control Enterprise resource planning Demand management Forecasting Sales and operations planning Master production scheduling Material requirements planning Capacity planning and management Production activity control Advanced scheduling Just-in-time Distribution requirements planning Management of supply chain logistics Order point inventory control methods Strategy and MPC system design
Download or read book Handbook of Manufacturing Control written by Hermann Lödding and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unternehmen mit kurzen Lieferzeiten, hoher Liefertreue und niedrigen Beständen wachsen schnell und erzielen hohe Gewinne. Wie Unternehmen diese logistische Herausforderung meistern können, zeigt das Buch anhand von aktuellen Forschungsergebnissen der Leibniz Universität Hannover. Der Band gibt einen umfassenden Überblick über die Aufgaben und Verfahren der Fertigungssteuerung und befähigt Leser dazu, Schwächen in diesem Bereich zu erkennen und zu korrigieren. Ein fundiertes Nachschlagewerk für Studierende, Dozenten, Ingenieure und Wissenschaftler.
Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.
Download or read book Manufacturing Planning and Control written by P. Higgins and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many companies have adopted the approach of Material Requirements Planning (MRP) and Manufacturing Resource Planning (MRP II). Despite the improvements and broadening of the MRP framework, MRP II systems still perform poorly in certain manufacturing environments. Help is at hand. This book proposes new ideas to improve the planning activities at the strategic, tactical and execution layers in manufacturing organisations. It takes into account the diverse nature of manufacturing environments. The book presents an almost unique combination of theory tested in practice, enhancing traditional manufacturing planning approaches. It is essential reading for managers and practitioners in the field, and is also suitable as an advanced text for students in industrial engineering, manufacturing and management.
Download or read book Advances in Production Management Systems written by Jan Olhager and published by Springer. This book was released on 2007-12-24 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together some of the latest thinking by leading experts from around the world on integrating systems and strategies in production management and related issues that are relevant for making production into a competitive resource for the firm. This book is composed of five parts, each focused on a specific theme: Linking systems and strategies; Strategic operations management; IS/IT applications in the value chain; Modelling and simulation; Improving operations.
Download or read book Optimal Flow Control in Manufacturing Systems written by O. Maimon and published by Springer Science & Business Media. This book was released on 1998-08-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified optimal control approach to a large class of problems arising in the field of production planning and scheduling. It introduces a leading optimal flow control paradigm which results in efficient solutions for planning and scheduling problems. This book also introduces the reader to analytical and numerical methods of the maximum principle, used here as a mathematical instrument in modeling and solving production planning and scheduling problems. The book examines control of production flows rather than sequencing of distinct jobs. Methodologically, this paradigm allows us to progress from initial assumptions about a manufacturing environment, through mathematical models and construction of numerical methods, up to practical applications which prove the relevance of the theory developed here to the real world. Given a manufacturing system, the goal is to control the production, subject to given constraints, in such a way that the demands are tracked as closely as possible. The book considers a wide variety of problems encountered in actual production planning and scheduling. Among the problems are production flow sequencing and timing, capacity expansion and deterioration, subcontracting and overtime. The last chapter is entirely devoted to applications of the theory to scheduling production flows in real-life manufacturing systems. The enclosed disk provides software implementations of the developed methods with easy, convenient user interface. We aimed this book at a student audience - final year undergraduates as weIl as master and Ph. D.
Download or read book Agent Based Manufacturing and Control Systems written by Massimo Paolucci and published by CRC Press. This book was released on 2004-10-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional manufacturing systems rely upon centralized, hierarchical systems that are not responsive enough to the increasing demand for mass customization. Decentralized, or heterarchical, management systems using autonomous agents promise to nullify the limitations of previous solutions. Agent-Based Manufacturing and Control Systems: New
Download or read book Cellular Manufacturing Systems written by N. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch manufactcring is a dominant manufacturing activity in the world, generating a great deal of industrial output. In the coming years, we are going to witness an era of mass customization of products. The major problems in batch manufacturing are a high level of product variety and small manufacturing lot sizes. The product variations present design engineers with the problem of designing many different parts. The decisions made in the design stage significantly affect manufacturing cost, quality and delivery lead times. The impacts of these product variations in manufacturing are high investment in equipment, high tooling costs, complex scheduling and loading, lengthy setup time and costs, excessive scrap and high quality control costs. However, to compete in a global market, it is essential to improve the productivity in small batch manufacturing industries. For this purpose, some innovative methods are needed to reduce product cost, lead time and enhance product quality to help increase market share and profitability. What is also needed is a higher level of integration of the design and manufacturing activities in a company. Group technology provides such a link between design and manufacturing. The adoption of group technology concepts, which allow for small batch production to gain economic advantages similar to mass production while retaining the flexibility of job shop methods, will help address some of the problems.
