Download or read book Manual of Airborne Topographic Lidar written by Michael S. Renslow and published by . This book was released on 2012 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Elevation Model Technologies and Applications written by David Francis Maune and published by American Society for Photogrammetry & Remote Sensing. This book was released on 2007 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DE Users Manual is designed to help potential users of digital elevation data understand and articulate their requirements in a way that their expectations are satisfied. if you have a dream that DEM's can help you do a better job, or you need to know more about DEM technologies and applications then this manual is for you.
Download or read book Topographic Laser Ranging and Scanning written by Jie Shan and published by CRC Press. This book was released on 2017-12-19 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic, in-depth introduction to theories and principles of Light Detection and Ranging (LiDAR) technology is long overdue, as it is the most important geospatial data acquisition technology to be introduced in recent years. An advanced discussion, this text fills the void. Professionals in fields ranging from geology, geography and geoinformatics to physics, transportation, and law enforcement will benefit from this comprehensive discussion of topographic LiDAR principles, systems, data acquisition, and data processing techniques. The book covers ranging and scanning fundamentals, and broad, contemporary analysis of airborne LiDAR systems, as well as those situated on land and in space. The authors present data collection at the signal level in terms of waveforms and their properties; at the system level with regard to calibration and georeferencing; and at the data level to discuss error budget, quality control, and data organization. They devote the bulk of the book to LiDAR data processing and information extraction and elaborate on recent developments in building extraction and reconstruction, highlighting quality and performance evaluations. There is also extensive discussion of the state-of-the-art technological developments used in: filtering algorithms for digital terrain model generation; strip adjustment of data for registration; co-registration of LiDAR data with imagery; forestry inventory; and surveying. Readers get insight into why LiDAR is the effective tool of choice to collect massive volumes of explicit 3-D data with unprecedented accuracy and simplicity. Compiled by leading experts talking about much of their own pioneering work, this book will give researchers, professionals, and senior students novel ideas to supplement their own experience and practices.
Download or read book Manual of Photogrammetry written by Roy Mullen and published by American Society for Photogrammetry & Remote Sensing. This book was released on 2004 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Geospatial Science and Technology written by John D. Bossler and published by CRC Press. This book was released on 2001-11-22 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals in local and national government and in the private sector frequently need to draw on Geographical Information Systems (GIS), Remote Sensing (RS) and Global Positioning Systems (GPS), often in an integrated manner. This manual shows a hands-on operator how to work across the range of geospatial science and technology, whether as a user or as a contractor of services employing these technologies, and without either specialist education or substantial experience. The manual covers the fundamentals of each of these topical areas, providing the requisite mathematics, computer science and physics necessary to understand how the technologies work, assuming some elementary background in calculus and physics. It also shows how the technologies can be used together and focuses on their commonalities. A number of applications such as mapping and environmental modeling are presented, and a website accompanies the book.
Download or read book Advances in Airborne Lidar Systems and Data Processing written by and published by . This book was released on 2018-05-11 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the papers in the special issue "Airborne Laser Scanning" in Remote Sensing (Nov. 2016) and several other selected papers published in the same journal in the past few years. Our intention is to reflect recent technological developments and innovative techniques in this field. The book consists of 23 papers in six subject areas: 1) Single photon and Geiger-mode Lidar, 2) Multispectral lidar, 3) Waveform lidar, 4) Registration of point clouds, 5) Trees and terrain, and 6) Building extraction. The book is a valuable resource for scientists, engineers, developers, instructors, and graduate students interested in lidar systems and data processing.
Download or read book Springer Handbook of Atmospheric Measurements written by Thomas Foken and published by Springer Nature. This book was released on 2021-11-09 with total page 1761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook provides a clearly structured, concise and comprehensive account of the huge variety of atmospheric and related measurements relevant to meteorologists and for the purpose of weather forecasting and climate research, but also to the practitioner in the wider field of environmental physics and ecology. The Springer Handbook of Atmospheric Measurements is divided into six parts: The first part offers instructive descriptions of the basics of atmospheric measurements and the multitude of their influencing factors, fundamentals of quality control and standardization, as well as equations and tables of atmospheric, water, and soil quantities. The subsequent parts present classical in-situ measurements as well as remote sensing techniques from both ground-based as well as airborn or satellite-based methods. The next part focusses on complex measurements and methods that integrate different techniques to establish more holistic data. Brief discussions of measurements in soils and water, at plants, in urban and rural environments and for renewable energies demonstrate the potential of such applications. The final part provides an overview of atmospheric and ecological networks. Written by distinguished experts from academia and industry, each of the 64 chapters provides in-depth discussions of the available devices with their specifications, aspects of quality control, maintenance as well as their potential for the future. A large number of thoroughly compiled tables of physical quantities, sensors and system characteristics make this handbook a unique, universal and useful reference for the practitioner and absolutely essential for researchers, students, and technicians.
Download or read book Handbook on Advances in Remote Sensing and Geographic Information Systems written by Margarita N. Favorskaya and published by Springer. This book was released on 2017-02-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in remote-sensing and geographic information systems and applications. It is divided into four parts, focusing on Airborne Light Detection and Ranging (LiDAR) and Optical Measurements of Forests; Individual Tree Modelling; Landscape Scene Modelling; and Forest Eco-system Modelling. Given the scope of its coverage, the book offers a valuable resource for students, researchers, practitioners, and educators interested in remote sensing and geographic information systems and applications.
Download or read book LiDAR Remote Sensing and Applications written by Pinliang Dong and published by CRC Press. This book was released on 2017-12-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for both undergraduate and graduate students in the fields of geography, forestry, ecology, geographic information science, remote sensing, and photogrammetric engineering, LiDAR Remote Sensing and Applications expertly joins LiDAR principles, data processing basics, applications, and hands-on practices in one comprehensive source. The LiDAR data within this book is collected from 27 areas in the United States, Brazil, Canada, Ghana, and Haiti and includes 183 figures created to introduce the concepts, methods, and applications in a clear context. It provides 11 step-by-step projects predominately based on Esri’s ArcGIS software to support seamless integration of LiDAR products and other GIS data. The first six projects are for basic LiDAR data visualization and processing and the other five cover more advanced topics: from mapping gaps in mangrove forests in Everglades National Park, Florida to generating trend surfaces for rock layers in Raplee Ridge, Utah. Features Offers a comprehensive overview of LiDAR technology with numerous applications in geography, forestry and earth science Gives necessary theoretical foundations from all pertinent subject matter areas Uses case studies and best practices to point readers to tools and resources Provides a synthesis of ongoing research in the area of LiDAR remote sensing technology Includes carefully selected illustrations and data from the authors' research projects Before every project in the book, a link is provided for users to download data
Download or read book Coral Reef Remote Sensing written by James A. Goodman and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote sensing stands as the defining technology in our ability to monitor coral reefs, as well as their biophysical properties and associated processes, at regional to global scales. With overwhelming evidence that much of Earth’s reefs are in decline, our need for large-scale, repeatable assessments of reefs has never been so great. Fortunately, the last two decades have seen a rapid expansion in the ability for remote sensing to map and monitor the coral reef ecosystem, its overlying water column, and surrounding environment. Remote sensing is now a fundamental tool for the mapping, monitoring and management of coral reef ecosystems. Remote sensing offers repeatable, quantitative assessments of habitat and environmental characteristics over spatially extensive areas. As the multi-disciplinary field of coral reef remote sensing continues to mature, results demonstrate that the techniques and capabilities continue to improve. New developments allow reef assessments and mapping to be performed with higher accuracy, across greater spatial areas, and with greater temporal frequency. The increased level of information that remote sensing now makes available also allows more complex scientific questions to be addressed. As defined for this book, remote sensing includes the vast array of geospatial data collected from land, water, ship, airborne and satellite platforms. The book is organized by technology, including: visible and infrared sensing using photographic, multispectral and hyperspectral instruments; active sensing using light detection and ranging (LiDAR); acoustic sensing using ship, autonomous underwater vehicle (AUV) and in-water platforms; and thermal and radar instruments. Emphasis and Audience This book serves multiple roles. It offers an overview of the current state-of-the-art technologies for reef mapping, provides detailed technical information for coral reef remote sensing specialists, imparts insight on the scientific questions that can be tackled using this technology, and also includes a foundation for those new to reef remote sensing. The individual sections of the book include introductory overviews of four main types of remotely sensed data used to study coral reefs, followed by specific examples demonstrating practical applications of the different technologies being discussed. Guidelines for selecting the most appropriate sensor for particular applications are provided, including an overview of how to utilize remote sensing data as an effective tool in science and management. The text is richly illustrated with examples of each sensing technology applied to a range of scientific, monitoring and management questions in reefs around the world. As such, the book is broadly accessible to a general audience, as well as students, managers, remote sensing specialists and anyone else working with coral reef ecosystems.
Download or read book Airborne and Terrestrial Laser Scanning written by George Vosselman and published by CRC Press. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of international experts, this book provides a comprehensive overview of the major applications of airborne and terrestrial laser scanning. It focuses on principles and methods and presents an integrated treatment of airborne and terrestrial laser scanning technology. After consideration of the technology and processing methods, the book turns to applications, such as engineering, forestry, cultural heritage, extraction of 3D building models, and mobile mapping. This book brings together the various facets of the subject in a coherent text that will be relevant for advanced students, academics and practitioners.
Download or read book Topographic Laser Ranging and Scanning written by Jie Shan and published by CRC Press. This book was released on 2018-02-19 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topographic Laser Ranging and Scanning, Second Edition, provides a comprehensive discussion of topographic LiDAR principles, systems, data acquisition, and data processing techniques. This edition presents an introduction and summary of various LiDAR systems and their principles and addresses the operational principles of the different components and ranging methods of LiDAR systems. It discusses the subsequent geometric processing of LiDAR data, with particular attention to quality, accuracy, and meeting standards and addresses the theories and practices of information extraction from LiDAR data, including terrain surface generation, forest inventory, orthoimage generation, building reconstruction, and road extraction. Written by leaders in the field, this comprehensive compilation is a must-have reference book for senior undergraduate and graduate students majoring or working in diverse disciplines, such as geomatics, geodesy, natural resources, urban planning, computer vision, and computer graphics. It is also vital resource for researchers who are interested in developing new methods and need in-depth knowledge of laser scanning and data processing and other professionals may gain the same from the broad topics addressed in this book. New in the Second Edition: A comprehensive array of new laser ranging and scanning technologies. Developments in LiDAR data format and processing techniques. Regrouping of surface modeling, representations and reconstruction. Enhanced discussions on the principles and fundamentals beyond small-footprint pulsed laser systems and new application examples. Many new examples and illustrations.
Download or read book Remote Sensing Handbook Three Volume Set written by Prasad Thenkabail and published by CRC Press. This book was released on 2018-10-03 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A volume in the three-volume Remote Sensing Handbook series, Remote Sensing of Water Resources, Disasters, and Urban Studies documents the scientific and methodological advances that have taken place during the last 50 years. The other two volumes in the series are Remotely Sensed Data Characterization, Classification, and Accuracies, and Land Reso
Download or read book Digital Terrain Modeling written by Zhilin Li and published by CRC Press. This book was released on 2004-11-29 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts, Digital Terrain Modeling: Principles and Methodology provides comprehensive coverage of recent developments in the field. The topics include terrain analysis, sampling strategy, acquisition methodology, surface modeling principles, triangulation algorithms, interpolation techniques, on-line and off-line quality control in data a
Download or read book Interpreting Archaeological Topography written by David Cowley and published by Oxbow Books Limited. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Airborne Laser Scanning (ALS), or lidar, is an enormously important innovation for data collection and interpretation in archaeology. The application of archaeological 3D data deriving from sources including ALS, close-range photogrammetry and terrestrial and photogrammetric scanners has grown exponentially over the last decade. Such data present numerous possibilities and challenges, from ensuring that applications remain archaeologically relevant, to developing practices that integrate the manipulation and interrogation of complex digital datasets with the skills of archaeological observation and interpretation. This volume addresses the implications of multi-scaled topographic data for contemporary archaeological practice in a rapidly developing field, drawing on examples of ongoing projects and reflections on best practice. Twenty papers from across Europe explore the implications of these digital 3D datasets for the recording and interpretation of archaeological topography, whether at the landscape, site or artifact scale. The papers illustrate the variety of ways in which we engage with archaeological topography through 3D data, from discussions of its role in landscape archaeology, to issues of context and integration, and to the methodological challenges of processing, visualization and manipulation. Critical reflection on developing practice and implications for cultural resource management and research contextualize the case studies and applications, illustrating the diverse and evolving roles played by multi-scalar topographic data in contemporary archaeology.
Download or read book Forest Water Interactions written by Delphis F. Levia and published by Springer Nature. This book was released on 2020-02-05 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United Nations has declared 2018-2028 as the International Decade for Action on Water for Sustainable Development. This is a timely designation. In an increasingly thirsty world, the subject of forest-water interactions is of critical importance to the achievement of sustainability goals. The central underlying tenet of this book is that the hydrologic community can conduct better science and make a more meaningful impact to the world’s water crisis if scientists are: (1) better equipped to utilize new methods and harness big data from either or both high-frequency sensors and long-term research watersheds; and (2) aware of new developments in our process-based understanding of the hydrological cycle in both natural and urban settings. Accordingly, this forward-looking book delves into forest-water interactions from multiple methodological, statistical, and process-based perspectives (with some chapters featuring data sets and open-source R code), concluding with a chapter on future forest hydrology under global change. Thus, this book describes the opportunities of convergence in high-frequency sensing, big data, and open source software to catalyze more comprehensive understanding of forest-water interactions. The book will be of interest to researchers, graduate students, and advanced undergraduates in an array of disciplines, including hydrology, forestry, ecology, botany, and environmental engineering.
Download or read book Selected papers from the 2019 IEEE International Workshop on Metrology for AeroSpace written by Pasquale Daponte and published by MDPI. This book was released on 2021-04-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to recent developments of instrumentation and measurement techniques applied to the aerospace field. It includes 23 selected papers from the 2019 IEEE International Workshop on Metrology for AeroSpace. Measurements are essential for obtaining a deeper knowledge of a phenomenon or an asset, as well as for making proper decisions and proposing new and efficient solutions, and this is especially true in environments as complex as aerospace. The research contributions included in the book can raise the interest of a wide group of researchers, operators and decision-makers from metrology and aerospace fields by presenting the most innovative solutions in this field from the scientific and technological points of view.
