Download or read book Managing the Continuum Certainty Uncertainty Unpredictability in Large Engineering Projects written by Franco Caron and published by Springer Science & Business Media. This book was released on 2013-05-24 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brief will describe how to develop a risk analysis applied to a project , through a sequence of steps: risk management planning, risk identification, risk classification, risk assessment, risk quantification, risk response planning, risk monitoring and control, process close out and lessons learning. The project risk analysis and management process will be applied to large engineering projects, in particular related to the oil and gas industry. The brief will address the overall range of possible events affecting the project moving from certainty (project issues) through uncertainty (project risks) to unpredictability (unforeseeable events), considering both negative and positive events. Some quantitative techniques (simulation, event tree, Bayesian inference, etc.) will be used to develop risk quantification. The brief addresses a typical subject in the area of project management, with reference to large engineering projects concerning the realization of large plants and infrastructures. These projects are characterized by a high level of change, uncertainty, complexity and ambiguity. The brief represents an extension of the material developed for the course Project Risk Analysis and Management of the Master in Strategic Project Management (Erasmus Mundus) developed jointly by Politecnico di Milano, Heriot Watt University (Edimburgh) and Umea (Sweden). The brief may be used both in courses addressing project management subjects and by practitioners as a guide for developing an effective project risk management plan.

Download or read book Project Management Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-06-09 with total page 2453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organizations of all types are consistently working on new initiatives, product lines, or implementation of new workflows as a way to remain competitive in the modern business environment. No matter the type of project at hand, employing the best methods for effective execution and timely completion of the task at hand is essential to project success. Project Management: Concepts, Methodologies, Tools, and Applications presents the latest research and practical solutions for managing every stage of the project lifecycle. Emphasizing emerging concepts, real-world examples, and authoritative research on managing project workflows and measuring project success in both private and public sectors, this multi-volume reference work is a critical addition to academic, government, and corporate libraries. It is designed for use by project coordinators and managers, business executives, researchers, and graduate-level students interested in putting research-based solutions into practice for effective project management.

Download or read book Analyzing Risk through Probabilistic Modeling in Operations Research written by Jakóbczak, Dariusz Jacek and published by IGI Global. This book was released on 2015-11-03 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic modeling represents a subject spanning many branches of mathematics, economics, and computer science to connect pure mathematics with applied sciences. Operational research also relies on this connection to enable the improvement of business functions and decision making. Analyzing Risk through Probabilistic Modeling in Operations Research is an authoritative reference publication discussing the various challenges in management and decision science. Featuring exhaustive coverage on a range of topics within operational research including, but not limited to, decision analysis, data mining, process modeling, probabilistic interpolation and extrapolation, and optimization methods, this book is an essential reference source for decision makers, academicians, researchers, advanced-level students, technology developers, and government officials interested in the implementation of probabilistic modeling in various business applications.

Download or read book Analyzing Data Through Probabilistic Modeling in Statistics written by Jakóbczak, Dariusz Jacek and published by IGI Global. This book was released on 2021-02-19 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic modeling represents a subject arising in many branches of mathematics, economics, and computer science. Such modeling connects pure mathematics with applied sciences. Similarly, data analyzing and statistics are situated on the border between pure mathematics and applied sciences. Therefore, when probabilistic modeling meets statistics, it is a very interesting occasion that has gained much research recently. With the increase of these technologies in life and work, it has become somewhat essential in the workplace to have planning, timetabling, scheduling, decision making, optimization, simulation, data analysis, and risk analysis and process modeling. However, there are still many difficulties and challenges that arrive in these sectors during the process of planning or decision making. There continues to be the need for more research on the impact of such probabilistic modeling with other approaches. Analyzing Data Through Probabilistic Modeling in Statistics is an essential reference source that builds on the available literature in the field of probabilistic modeling, statistics, operational research, planning and scheduling, data extrapolation in decision making, probabilistic interpolation and extrapolation in simulation, stochastic processes, and decision analysis. This text will provide the resources necessary for economics and management sciences and for mathematics and computer sciences. This book is ideal for interested technology developers, decision makers, mathematicians, statisticians and practitioners, stakeholders, researchers, academicians, and students looking to further their research exposure to pertinent topics in operations research and probabilistic modeling.

Download or read book Advanced Methodologies and Technologies in Business Operations and Management written by Khosrow-Pour, D.B.A., Mehdi and published by IGI Global. This book was released on 2018-09-14 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Businesses consistently work on new projects, products, and workflows to remain competitive and successful in the modern business environment. To remain zealous, businesses must employ the most effective methods and tools in human resources, project management, and overall business plan execution as competitors work to succeed as well. Advanced Methodologies and Technologies in Business Operations and Management provides emerging research on business tools such as employee engagement, payout policies, and financial investing to promote operational success. While highlighting the challenges facing modern organizations, readers will learn how corporate social responsibility and utilizing artificial intelligence improve a company’s culture and management. This book is an ideal resource for executives and managers, researchers, accountants, and financial investors seeking current research on business operations and management.

Download or read book Sustainability Management in the Oil and Gas Industry written by Joshua Yindenaba Abor and published by Taylor & Francis. This book was released on 2023-06-07 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oil and gas industry is a complex sector with significant reach in terms of providing the energy needs of the global economy and the security, environmental and development consequences thereof. In particular, the sector is extremely important for the economic growth of emerging markets and developing countries. Furthermore, the life span of oil and gas resources is finite, with high health and safety risks and substantial environmental costs that require careful management and sustainability practices to ensure optimal extraction and utilisation of these resources. This book examines the challenges and opportunities in the oil and gas industry, in the context of emerging markets and developing economies. It provides comprehensive coverage of the management and sustainability practices of the sector, the environmental impact and sustainability of resources as well as the businesses that operate in the sector across the entire value chain. It addresses the current discourse on topics such as the Sustainable Development Goals, the Green Economy, the Paris Agreement and Glasgow Climate Pact and concludes with a chapter on the future of the oil and gas industry. The discussions around energy and energy transitions in particular continue to gain momentum and the book provides a wide-reaching and up-to-date overview of the industry. The book introduces readers to the concepts and formal models of analysis in the oil and gas sector and will serve as a useful resource for students, scholars and researchers in operations, marketing, procurement and supply chain management, project management, health and safety management, environmental economics, natural resource economics, development finance, and development studies. Researchers and practitioners working in these areas will also find the book a useful reference material.

Download or read book Systemic and Systematic Risk Management written by Joseph E. Kasser and published by CRC Press. This book was released on 2020-05-14 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses risk management as it applies to problem-solving for simple, complex and wicked problems faced by policy creators and implementors, project managers and systems engineers in the context of policies, large engineering projects (LEPs), projects and systems. When applying systems thinking to risk management, it can be seen that risk management applies to almost every action taken in daily life. This book: Introduces the systems approach of integrating risk management into policy creation and implementation, project management and systems engineering, such as the risk framework and the Firm Fixed Price (FFP) contract with penalties and bonuses. Introduces a number of out-of-the box concepts building on the application of the systems thinking tools in the system thinker’s toolbox. Points out that integrating risk management into policy and project management and systems engineering is just good management and engineering practice. Discusses the flow of risk in a policy from creation through implementation via LEPs and simpler projects, identifying where risks arise and where they should be dealt with. Presents the risks in the relationship between policy creation, implementation, project management and systems engineering. Discusses risks throughout the policy implementation process and shows how the nature of risks changes from political to financial to technological as implementation proceeds. Discusses managing complexity and specifies the minimum number of elements in a system for it to be defined as, and managed as, complex. Points out that in most instances the traditionally ignored major implementation risk is that of poor performance by personnel. Shows how to proactively incorporate prevention into planning in order to prevent risks, as well as how to mitigate them when they occur.

Download or read book Identifying and Managing Project Risk written by Tom Kendrick and published by AMACOM. This book was released on 2009-02-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Project Management Institute’s David I. Cleland Project Management Literature Award 2010 It’s no wonder that project managers spend so much time focusing their attention on risk identification. Important projects tend to be time constrained, pose huge technical challenges, and suffer from a lack of adequate resources. Identifying and Managing Project Risk, now updated and consistent with the very latest Project Management Body of Knowledge (PMBOK)® Guide, takes readers through every phase of a project, showing them how to consider the possible risks involved at every point in the process. Drawing on real-world situations and hundreds of examples, the book outlines proven methods, demonstrating key ideas for project risk planning and showing how to use high-level risk assessment tools. Analyzing aspects such as available resources, project scope, and scheduling, this new edition also explores the growing area of Enterprise Risk Management. Comprehensive and completely up-to-date, this book helps readers determine risk factors thoroughly and decisively...before a project gets derailed.

Download or read book Entrepreneurial Action written by Andrew C. Corbett and published by Emerald Group Publishing. This book was released on 2012-07-17 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 14 addresses the central issue of entrepreneurial action: while many factors are important to the phenomenon of entrepreneurship, entrepreneurship does not happen until someone takes action!

Download or read book Managing Uncertainty written by Michel Syrett and published by The Economist. This book was released on 2014-02-25 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing uncertainty has become a new business imperative. Technological discontinuities, regulatory upheavals, geopolitical shocks, abrupt shifts in consumer tastes or behavior, and many other factors have emerged or intensified in recent years and together conspire to undermine even the most carefully constructed business strategies. Managing Uncertainty: Strategies for Surviving and Thriving in Turbulent Times addresses these new challenges, assessing the sources of business turbulence, how to classify uncertainty, and the different ways in which uncertainty can be embraced to allow greater innovation and growth. Drawing on examples from around the world, the book presents the most recent ideas on what it means to manage uncertainty, from practitioners, academics, and consultants. Addresses the challenges of managing uncertainty in business Presents a step-by-step guide to managing business uncertainty Draws examples from major international companies, including Intel, Procter & Gamble, Siemens, Boeing, Quinetiq, Philips, China Telecom, Ford, Apple, Shell, Glaxo SmithKline and many more Written for business leaders and managers looking for new ways to ensure that their businesses continue to thrive in a world of increasing complexity, Managing Uncertainty presents new and innovative ideas about reducing risk by understanding difficult-to-predict shifts.

Download or read book MITRE Systems Engineering Guide written by and published by . This book was released on 2012-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainability in Project Management written by Mr Adri Köhler and published by Gower Publishing, Ltd.. This book was released on 2012-09-28 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of sustainability has grown in recognition and importance. The pressure on companies to broaden their reporting and accountability from economic performance for shareholders, to sustainability performance for all stakeholders is leading to a change of mindset in consumer behaviour and corporate policies. How can we develop prosperity without compromising the life and needs of future generations? Sustainability in Project Management explores and identifies the questions surrounding the integration of the concepts of sustainability in projects and project management and provides valuable guidance and insights. Sustainability relates to multiple perspectives, economical, environmental and social, but also to responsibility and accountability and values in terms of ethics, fairness and equality. The authors will inspire project managers to be aware of these considerations, and to apply them to the role they play in projects, not just 'doing things right' but 'doing the right things right'.

Download or read book Project Portfolios in Dynamic Environments written by Brian Hobbs and published by Project Management Institute. This book was released on 2012-05-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Portfolios in Dynamic Environments: Organizing for Uncertainty is a comprehensive report of research that addresses this important, rising issue. Authors Yvan Petit and Brian Hobbs present the results of their investigation in a report that significantly advances the theory and also offers tips for practice. Currently, those applying project portfolio management tend to focus on the selection, prioritization, and strategic alignment of projects. Little attention is afforded the potential disturbances to project portfolios such as new projects, terminated projects, delayed projects, incorrect planning due to high uncertainty, and changes in the external environment. Yet, these factors can have highly disruptive, even show-stopping influence. This research seeks to answer: How is uncertainty affecting project portfolios managed in dynamic environments?

Download or read book Project Management in Practice written by Samuel J. Mantel and published by John Wiley & Sons. This book was released on 2011 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Management in Practice, 4th Edition focuses on the technical aspects of project management that are directly related to practice.

Download or read book Project Management written by Jack R. Meredith and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Projects continue to grow larger, increasingly strategic, and more complex, with greater collaboration, instant feedback, specialization, and an ever-expanding list of stakeholders. Now more than ever, effective project management is critical for the success of any deliverable, and the demand for qualified Project Managers has leapt into nearly all sectors. Project Management provides a robust grounding in essentials of the field using a managerial approach to both fundamental concepts and real-world practice. Designed for business students, this text follows the project life cycle from beginning to end to demonstrate what successful project management looks like on the ground. Expert discussion details specific techniques and applications, while guiding students through the diverse skill set required to select, initiate, execute, and evaluate today's projects. Insightful coverage of change management provides clear guidance on handling the organizational, interpersonal, economic, and technical glitches that can derail any project, while in-depth cases and real-world examples illustrate essential concepts in action.

Download or read book Project Management for Engineering Business and Technology written by John M. Nicholas and published by Routledge. This book was released on 2020-08-02 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Management for Engineering, Business and Technology is a highly regarded textbook that addresses project management across all industries. First covering the essential background, from origins and philosophy to methodology, the bulk of the book is dedicated to concepts and techniques for practical application. Coverage includes project initiation and proposals, scope and task definition, scheduling, budgeting, risk analysis, control, project selection and portfolio management, program management, project organization, and all-important "people" aspects—project leadership, team building, conflict resolution, and stress management. The systems development cycle is used as a framework to discuss project management in a variety of situations, making this the go-to book for managing virtually any kind of project, program, or task force. The authors focus on the ultimate purpose of project management—to unify and integrate the interests, resources and work efforts of many stakeholders, as well as the planning, scheduling, and budgeting needed to accomplish overall project goals. This sixth edition features: updates throughout to cover the latest developments in project management methodologies; a new chapter on project procurement management and contracts; an expansion of case study coverage throughout, including those on the topic of sustainability and climate change, as well as cases and examples from across the globe, including India, Africa, Asia, and Australia; and extensive instructor support materials, including an instructor’s manual, PowerPoint slides, answers to chapter review questions and a test bank of questions. Taking a technical yet accessible approach, this book is an ideal resource and reference for all advanced undergraduate and graduate students in project management courses, as well as for practicing project managers across all industry sectors.

Download or read book Mastering Uncertainty in Mechanical Engineering written by Peter F. Pelz and published by Springer Nature. This book was released on 2021-10-11 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book reports on innovative methods, technologies and strategies for mastering uncertainty in technical systems. Despite the fact that current research on uncertainty is mainly focusing on uncertainty quantification and analysis, this book gives emphasis to innovative ways to master uncertainty in engineering design, production and product usage alike. It gathers authoritative contributions by more than 30 scientists reporting on years of research in the areas of engineering, applied mathematics and law, thus offering a timely, comprehensive and multidisciplinary account of theories and methods for quantifying data, model and structural uncertainty, and of fundamental strategies for mastering uncertainty. It covers key concepts such as robustness, flexibility and resilience in detail. All the described methods, technologies and strategies have been validated with the help of three technical systems, i.e. the Modular Active Spring-Damper System, the Active Air Spring and the 3D Servo Press, which have been in turn developed and tested during more than ten years of cooperative research. Overall, this book offers a timely, practice-oriented reference guide to graduate students, researchers and professionals dealing with uncertainty in the broad field of mechanical engineering.