Download or read book Magneto electronic Phase Separation in Strontium Doped Perovskite Cobaltites written by Jing Wu and published by . This book was released on 2006 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Perovskites written by Asish K Kundu and published by Springer. This book was released on 2016-02-11 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic perovskite with multi functional properties (magneto-resistive, magneto-dielectric, multiferroics, spintronics, etc.) have attracted increasing attention due to their possible applications towards storage materials and intriguing fundamental Physics. Despite the numerous investigations on multi functional materials in the past few years, a very few magnetic perovskites have been known to realize as ferromagnetic-insulators. In perovskites centred transition metal oxides strong interplay between lattice, charge, spin and/or orbital degrees of freedom provide a fantastic playground to tune their physical properties. The main purpose of this book is to introduce the phenomenon and physics of complex magnetism (phase separation, spin glass, frustrations, etc.) in perovskite manganites and cobaltites via an experimental approach. The book is organized into four chapters; Chap. 1 gives a brief introduction of various interesting phenomena in magnetic perovskites. Chapter 2 describes the results of the investigations on electronic phase separation and glassy ferromagnetism of the hole-doped perovskite manganites and cobaltites. Ordered and disordered effects and related aspects in hole-doped perovskite cobaltites are described in Chap. 3. Finally, in Chap. 4 the bismuth based magnetic perovskite is discussed.
Download or read book Bibliography written by Pierre Villars and published by Walter de Gruyter. This book was released on 2012-12-21 with total page 1827 pages. Available in PDF, EPUB and Kindle. Book excerpt: By browsing about 10 000 000 scientific articles of over 200 major journals mainly in a 'cover to cover approach' some 200 000 publications were selected. The extracted data is part of the following fundamental material research fields: crystal structures (S), phase diagrams (also called constitution) (C) and the comprehensive field of intrinsic physical properties (P). This work has been done systematically starting with the literature going back to 1900. The above mentioned research field codes (S, C, P) as well as the chemical systems investigated in each publication were included in the present work. The aim of the Inorganic Substances Bibliography is to provide researchers with a comprehensive compilation of all up to now published scientific publications on inorganic systems in only three handy volumes.
Download or read book Perovskite Manganates and Cobaltates written by Asish K Kundu and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic phase separation and spin glass behavior were certainly the new areas in perovskite oxides which have recently been established experimentally. The main purpose of this book is to introduce the phenomenon and physics of complex magnetism (phase separation, spin glass, glassy magnetism, frustrations etc) in perovskite manganates and cobaltates via an experimental approach. A variety of magnetic and electronic properties manifest in hole-doped perovskite oxides depending on the various factors such as the A-site cation size and size-disorder effect as well as external factors (pressure, temperature, magnetic field etc). The physical properties of these oxides can be tuned by external factors or by chemical means. Such phenomena are manifested in polycrystals and single crystalline samples as well as in thin film. This book has revealed the presence of complex glassy magnetism in both perovskites, albeit of different varieties.
Download or read book Magnetic Small Angle Neutron Scattering written by Andreas Michels and published by Oxford University Press. This book was released on 2021 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Small-Angle Neutron Scattering provides the first extensive treatment of magnetic small-angle neutron scattering (SANS). The theoretical background required to compute magnetic SANS cross sections and correlation functions related to long-wavelength magnetization structures is laidout. The concepts are scrutinized based on the discussion of experimental neutron data. Regarding prior background knowledge, some familiarity with the basic magnetic interactions and phenomena as well as scattering theory is desired.Besides exposing the different origins of magnetic SANS, and furnishing the basics of the magnetic SANS technique in early chapters, a large part of the book is devoted to a comprehensive treatment of the continuum theory of micromagnetics, as it is relevant for the study of the elastic magneticSANS cross section. Analytical expressions for the magnetization Fourier components allow to highlight the essential features of magnetic SANS and to analyze experimental data both in reciprocal, as well as in real space. Later chapters provide an overview on the magnetic SANS of nanoparticles andso-called complex systems (e.g., ferrofluids, magnetic steels, spin glasses and amorphous magnets). It is this subfield where major progress is expected to be made in the coming years, mainly via the increased usage of numerical micromagnetic simulations (Chapter 7), which is a very promisingapproach for the understanding of the magnetic SANS from systems exhibiting nanoscale spin inhomogeneity.
Download or read book Fundamentals of Perovskite Oxides written by Gibin George and published by CRC Press. This book was released on 2020-10-07 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook entitled Fundamentals of Perovskite Oxides: Synthesis, Structure, Properties and Applications summarizes the structure, synthesis routes, and potential applications of perovskite oxide materials. Since these perovskite-type ceramic materials offer opportunities in a wide range of fields of science and engineering, the chapters are broadly organized into four sections of perovskite-type oxide materials and technology. Covers recent developments in perovskite oxides Serves as a quick reference of perovskite oxides information Describes novel synthesis routes for nanostructured perovskites Discusses comprehensive details for various crystal structures, synthesis methods, properties, and applications Applies to academic education, scientific research, and industrial R&D for materials research in real-world applications like bioengineering, catalysis, energy conversion, energy storage, environmental engineering, and data storage and sensing This book serves as a handy and practical guideline suitable for students, engineers, and researchers working with advanced ceramic materials.
Download or read book Using Similarities to Find Differences in Unusual Clusters Cobaltites and Forms of Science Communication written by Anne Poduska and published by . This book was released on 2007 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology Hybrid Materials written by Cheng Jun Sun and published by Trans Tech Publications Ltd. This book was released on 2006-04-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Advances in the welfare of humans tends to be directly related to advances in the science and technology of advanced materials. Hybrid materials make up just one such class of materials, and they are unique in the sense that they exhibit properties that cannot be achieved by using conventional materials design and - at the same time - cannot be predicted by using conventional extrapolations: such as a simple weighted average of the constituents properties.
Download or read book Physics of Manganites written by T.A. Kaplan and published by Springer Science & Business Media. This book was released on 1999-05-31 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involves chemistry, physics, materials science and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up to date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E mail: thorpe@pa. msu. edu V PREFACE This book records invited lectures given at the workshop on Physics of Manganites, held at Michigan State University, July 26 29, 1998. Doped manganites are an interesting class of compounds that show both metal insulator and ferromagnetic to paramagnetic transitions at the same temperature. This was discovered in the early 1950s by Jonker and van Santen and basic theoretical ideas were developed by Zener (1951), Anderson and Hasegawa (1955), and deGennes (1960) to explain these transitions and related interesting observations.
Download or read book Acta Physica Polonica written by and published by . This book was released on 2004 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: General physics, solid state physics, applied physics.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. Presents case studies in each chapter that provide a focus on the industrial applications Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Organic Inorganic Halide Perovskite Photovoltaics written by Nam-Gyu Park and published by Springer. This book was released on 2016-07-25 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers fundamentals of organometal perovskite materials and their photovoltaics, including materials preparation and device fabrications. Special emphasis is given to halide perovskites. The opto-electronic properties of perovskite materials and recent progress in perovskite solar cells are described. In addition, comments on the issues to current and future challenges are mentioned.
Download or read book Photoelectrocatalysis written by Leonardo Palmisano and published by Elsevier. This book was released on 2022-10-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrocatalysis: Fundamentals and Applications presents an in-depth review of the topic for students and researchersworking on photoelectrocatalysis-related subjects from pure chemistry to materials and environmental chemistry inorder to propose applications and new perspectives. The main advantage of a photoelectrocatalytic process is the mildexperimental conditions under which the reactions are carried out, which are often possible at atmospheric pressure androom temperature using cheap and nontoxic solvents (e.g., water), oxidants (e.g., O2 from the air), catalytic materials (e.g.,TiO2 on Ti layer), and the potential exploitation of solar light. This book presents the fundamentals and the applications of photoelectrocatalysis, such as hydrogen production fromwater splitting, the remediation of harmful compounds, and CO2 reduction. Photoelectrocatalytic reactors and lightsources, in addition to kinetic aspects, are presented along with an exploration of the relationship between photocatalysisand electrocatalysis. In addition, photocorrosion issues and the application of selective photoelectrocatalytic organictransformations, which is now a growing field of research, are also reported. Finally, the advantages/disadvantages andfuture perspectives of photoelectrocatalysis are highlighted through the possibility of working at a pilot/industrial scale inenvironmentally friendly conditions. Presents the fundamentals of photoelectrocatalysis Outlines photoelectrocatalytic green chemistry Reviews photoelectrocatalytic remediation of harmful compounds, hydrogen production, and CO2 reduction Includes photocorrosion, photoelectrocatalytic reactors, and modeling along with kinetic aspects
Download or read book Superconductivity written by Reinhold Kleiner and published by John Wiley & Sons. This book was released on 2016-03-16 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this proven text has been developed further in both scope and scale to reflect the potential for superconductivity in power engineering to increase efficiency in electricity transmission or engines. The landmark reference remains a comprehensive introduction to the field, covering every aspect from fundamentals to applications, and presenting the latest developments in organic superconductors, superconducting interfaces, quantum coherence, and applications in medicine and industry. Due to its precise language and numerous explanatory illustrations, it is suitable as an introductory textbook, with the level rising smoothly from chapter to chapter, such that readers can build on their newly acquired knowledge. The authors cover basic properties of superconductors and discuss stability and different material groups with reference to the latest and most promising applications, devoting the last third of the book to applications in power engineering, medicine, and low temperature physics. An extensive list of more than 350 references provides an overview of the most important publications on the topic. A unique and essential guide for students in physics and engineering, as well as a reference for more advanced researchers and young professionals.
Download or read book Perovskite Oxide for Solid Oxide Fuel Cells written by Tatsumi Ishihara and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cell technology is quite promising for conversion of chemical energy of hydrocarbon fuels into electricity without forming air pollutants. There are several types of fuel cells: polymer electrolyte fuel cell (PEFC), phosphoric acid fuel cell (PAFC), molten carbonate fuel cell (MCFC), solid oxide fuel cell (SOFC), and alkaline fuel cell (AFC). Among these, SOFCs are the most efficient and have various advantages such as flexibility in fuel, high reliability, simple balance of plant (BOP), and a long history. Therefore, SOFC technology is attracting much attention as a power plant and is now close to marketing as a combined heat and power generation system. From the beginning of SOFC development, many perovskite oxides have been used for SOFC components; for example, LaMnO -based oxide for the cathode and 3 LaCrO for the interconnect are the most well known materials for SOFCs. The 3 current SOFCs operate at temperatures higher than 1073 K. However, lowering the operating temperature of SOFCs is an important goal for further SOFC development. Reliability, durability, and stability of the SOFCs could be greatly improved by decreasing their operating temperature. In addition, a lower operating temperature is also beneficial for shortening the startup time and decreasing energy loss from heat radiation. For this purpose, faster oxide ion conductors are required to replace the conventional Y O -stabilized ZrO 2 3 2 electrolyte. A new class of electrolytes such as LaGaO is considered to be 3 highly useful for intermediate-temperature SOFCs.
Download or read book The Magnetocaloric Effect and its Applications written by A.M. Tishin and published by CRC Press. This book was released on 2016-04-19 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetocaloric effect describes the change in temperature of a magnetic material under adiabatic conditions through the application or removal of an external magnetic field. This effect is particularly pronounced at temperatures and fields corresponding to magnetic phase transitions, and it is a powerful and widely used tool for investigating t
Download or read book Raman Scattering in Materials Science written by Willes H. Weber and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Raman scattering is now being applied with increasing success to a wide range of practical problems at the cutting edge of materials science. The purpose of this book is to make Raman spectroscopy understandable to the non-specialist and thus to bring it into the mainstream of routine materials characterization. The book is pedagogical in approach and focuses on technologically important condensed-matter systems in which the specific use of Raman spectroscopy yields new and useful information. Included are chapters on instrumentation, bulk semiconductors and alloys, heterostructures, high-Tc superconductors, catalysts, carbon-based materials, wide-gap and super-hard materials, and polymers.
