Download or read book Magnetic Ferroelectric and Multiferroic Metal Oxides written by Biljana Stojanovic and published by Elsevier. This book was released on 2018-01-02 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic, Ferroelectric, and Multiferroic Metal Oxides covers the fundamental and theoretical aspects of ferroics and magnetoelectrics, their properties, and important technological applications, serving as the most comprehensive, up-to-date reference on the subject. Organized in four parts, Dr. Biljana Stojanovic leads expert contributors in providing the context to understand the material (Part I: Introduction), the theoretical and practical aspects of ferroelectrics (Part II: Ferroelectrics: From Theory, Structure and Preparation to Application), magnetic metal oxides (Part III: Magnetic Oxides: Ferromagnetics, Antiferromagnetics and Ferrimagnetics), multiferroics (Part IV: Multiferroic Metal Oxides) and future directions in research and application (Part V: Future of Metal Oxide Ferroics and Multiferroics). As ferroelectric materials are used to make capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects, this book will provide an ideal source for the most updated information. - Addresses ferroelectrics, ferromagnetics and multiferroelectrics, providing a one-stop reference for researchers - Provides fundamental theory and relevant, important technological applications - Highlights their use in capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects

Download or read book Magnetic Oxides written by Gerald F. Dionne and published by Springer Science & Business Media. This book was released on 2010-03-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Oxides offers a cohesive up-to-date introduction to magnetism in oxides. Emphasizing the physics and chemistry of local molecular interactions essential to the magnetic design of small structures and thin films, this volume provides a detailed view of the building blocks for new magnetic oxide materials already advancing research and development of nano-scale technologies. Clearly written in a well-organized structure, readers will find a detailed description of the properties of magnetic oxides through the prism of local interactions as an alternative to collective electron concepts that are more applicable to metals and semiconductors. Researchers will find Magnetic Oxides a valuable reference.

Download or read book Functional Metal Oxides written by Satishchandra Balkrishna Ogale and published by John Wiley & Sons. This book was released on 2013-11-08 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional oxides are used both as insulators and metallic conductors in key applications across all industrial sectors. This makes them attractive candidates in modern technology ? they make solar cells cheaper, computers more efficient and medical instrumentation more sensitive. Based on recent research, experts in the field describe novel materials, their properties and applications for energy systems, semiconductors, electronics, catalysts and thin films. This monograph is divided into 6 parts which allows the reader to find their topic of interest quickly and efficiently. * Magnetic Oxides * Dopants, Defects and Ferromagnetism in Metal Oxides * Ferroelectrics * Multiferroics * Interfaces and Magnetism * Devices and Applications This book is a valuable asset to materials scientists, solid state chemists, solid state physicists, as well as engineers in the electric and automotive industries.

Download or read book Ferroic Materials Based Technologies written by Inamuddin and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: FERROIC MATERIALS-BASED TECHNOLOGIES The book addresses the prospective, relevant, and original research developments in the ferroelectric, magnetic, and multiferroic fields. Ferroic materials have sparked widespread attention because they represent a broad spectrum of elementary physics and are employed in a plethora of fields, including flexible memory, enormous energy harvesting/storage, spintronic functionalities, spin caloritronics, and a large range of other multi-functional devices. With the application of new ferroic materials, strong room-temperature ferroelectricity with high saturation polarization may be established in ferroelectric materials, and magnetism with significant magnetization can be accomplished in magnetic materials. Furthermore, magnetoelectric interaction between ferroelectric and magnetic orderings is high in multiferroic materials, which could enable a wide range of innovative devices. Magnetic, ferroelectric, and multiferroic 2D materials with ultrathin characteristics above ambient temperature are often expected to enable future miniaturization of electronics beyond Moore’s law for energy-efficient nanodevices. This book addresses the prospective, relevant, and original research developments in the ferroelectric, magnetic, and multiferroic fields. Audience The book will interest materials scientists, physicists, and engineers working in ferroic and multiferroic materials.

Download or read book Advancement of Metal Oxide Materials for Photocatalytic Application written by Vitaly Gurylev and published by Springer Nature. This book was released on 2022-12-07 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates applicability of various emerging strategies to improve important properties and features of metal oxide materials that can be used further to advance their photocatalytic and photoelectrochemical performances. The range of discussed strategies includes introduction of intrinsic and extrinsic deficiencies, fabrication of heterojunction and utilizing of metal nanoparticles in the form of deposited or embedded formations. Each of them is addressed as separate case in order to reach full and comprehensive assessment of their most fundamental principles and basics as well as accessing pivotal advantages and disadvantages. Furthermore, additional discussion is dedicated to achieving thorough awareness over methods and experimental protocols that are used to realize them and also probing changes which they induce in electronic and geometrical configurations of metal oxide materials. It is believed that this book might become a valuable addition to extend further current knowledge about photocatalysis and material processing.

Download or read book Metal Oxide Powder Technologies written by Yarub Al-Douri and published by Elsevier. This book was released on 2020-06-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. - Provides a comprehensive overview of key topics both on the theoretical side and the experimental - Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications - Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications

Download or read book Perovskite Metal Oxides written by Srikanta Moharana and published by Elsevier. This book was released on 2023-05-30 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Metal Oxides: Synthesis, Properties and Applications provides an overview on the topic, including the synthesis of various types of perovskites, their properties, characterization and application. The book reviews the applications of this category of materials for photovoltaics, electronics, biomedical, fuel cell, photocatalyst, sensor, energy storage and catalysis, along with processing techniques of perovskite metal oxides with a focus on low-cost and high-efficiency methods, including various properties and probable applications in academia and industry. Other sections discuss strategies to improve the functionality of perovskite metal oxide materials, including chemical methods and controlling the size, shape and structure of the materials. Finally, applications of perovskite metal oxides in energy conversion and storage, sensing and electronics are covered. - Provides an overview of perovskite metal oxides, with an emphasis on synthesis, fabrication and characterization methods - Discusses strategies to improve the functionality of perovskite metal oxide materials, including chemical methods and controlling the size, shape and structure of the materials - Reviews applications of perovskite metal oxides in energy conversion and storage, sensing and electronics

Download or read book Metal Oxide Carbon Hybrid Materials written by Muhammad Akram Chaudhry and published by Elsevier. This book was released on 2022-03-20 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials' properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. - Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites - Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors - Includes current and emerging applications in environmental remediation and sensing

Download or read book Metal Oxides for Non volatile Memory written by Panagiotis Dimitrakis and published by Elsevier. This book was released on 2022-03-01 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Non-volatile Memory: Materials, Technology and Applications covers the technology and applications of metal oxides (MOx) in non-volatile memory (NVM) technology. The book addresses all types of NVMs, including floating-gate memories, 3-D memories, charge-trapping memories, quantum-dot memories, resistance switching memories and memristors, Mott memories and transparent memories. Applications of MOx in DRAM technology where they play a crucial role to the DRAM evolution are also addressed. The book offers a broad scope, encompassing discussions of materials properties, deposition methods, design and fabrication, and circuit and system level applications of metal oxides to non-volatile memory. Finally, the book addresses one of the most promising materials that may lead to a solution to the challenges in chip size and capacity for memory technologies, particular for mobile applications and embedded systems. - Systematically covers metal oxides materials and their properties with memory technology applications, including floating-gate memory, 3-D memory, memristors, and much more - Provides an overview on the most relevant deposition methods, including sputtering, CVD, ALD and MBE - Discusses the design and fabrication of metal oxides for wide breadth of non-volatile memory applications from 3-D flash technology, transparent memory and DRAM technology

Download or read book Metal Oxides for Biomedical and Biosensor Applications written by Kunal Mondal and published by Elsevier. This book was released on 2021-12-04 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Biomedical and Biosensor Applications gives an in-depth overview of the emerging research in the biomedical and biosensing applications of metal oxides, including optimization of their surface and bulk properties. Sections cover biomedical applications of metal oxides for use in cell cultures, antibacterial and antimicrobial treatments, dental applications, drug delivery, cancer therapy, immunotherapy, photothermal therapy, tissue engineering, and metal oxide-based biosensor development. As advanced and biofunctionalized nano/micro structured metal oxides are finding applications in microfluidics, optical sensors, electrochemical sensors, DNA-based biosensing, imaging, diagnosis and analysis, this book provides a comprehensive update on the topic. Additional sections cover research challenges, technology limitations, and future trends in metal oxides and their composites regarding their usage in biomedical applications. - Includes an overview of the important applications of metal oxides for biomedical and biosensing technologies - Addresses the relationship between material properties, such as structure, morphology, composition and performance - Reviews the design and fabrication strategies of metal oxides for use in medical and biosensing applications

Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. - Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies - Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering - Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection

Download or read book Metal Oxide Defects written by Vijay Kumar and published by Elsevier. This book was released on 2022-11-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. - Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials - Introduces defect engineering applied to the design of metal oxide materials with desirable properties - Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics

Download or read book Advances in Metal Oxides and Their Composites for Emerging Applications written by Sagar D. Delekar and published by Elsevier. This book was released on 2022-08-26 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Metal Oxides and their Composites for Emerging Applications reviews key properties of metal-oxide based composites, including their structural, physicochemical, optical, electrical components and resulting performance in a wide range of diverse applications. Synthetic protocols used to create metal oxides with desirable morphologies, properties and performance for applications in solar energy harvesting, energy storage and environmental remediation are emphasized. Emerging technologies that address important global challenges such as energy shortage, the hazardous effects of non-renewable energy sources, unaffordable energy technologies, and the contaminants present in air and water are also covered. This book is an ideal resource for materials scientists and engineers working in academia and R&D. In addition, it's appropriate for those who either need an introduction to potential research directions or for experienced researchers and practitioners looking for a key reference on the latest advances. - Introduces the fundamental properties of metal oxide-based composites, paying special attention to physicochemical, optical, electrical and structural characteristics - Provides an overview of the synthetic protocols used to design and tune the properties of metal oxide-based composites for key emerging applications - Discusses metal oxide-based composites and their use in energy applications such as energy storage, energy harvesting and environmental remediation

Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides' physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. - Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications - Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices - Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more

Download or read book Metal Oxide Based Nanofibers and Their Applications written by Vincenzo Esposito and published by Elsevier. This book was released on 2021-10-25 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-based Nanofibers and their Applications provides an in-depth overview on developments surrounding the synthesis, characterization properties, and applications achieved by scientific leaders in the area. Sections deal with the theoretical and experimental aspects of the synthesis and methodologies to control microstructure, composition and shape of the nanofibrous metal oxides, review the applications of metal oxide nanofibers in diverse technologies, with special focus on the relation between the structural, morphological and compositional features of the nanofibers, cover applications of metal oxide nanofibers in the fields of sensing (biosensing, gas sensing), and consider biomedical and cleaning technologies. Lastly, a final section covers their application in energy generation and storage technologies (e. g. piezoelectric, solar cells, solid oxide fuel cells, lithium-ion batteries, supercapacitors, and hydrogen storage are reviewed. - Reviews electrospinning methods for the synthesis and design of nanocomposites and hybrid metal oxide nanofibers - Discusses applications of metal oxide nanofibers in sensing, biomedical fields, cleaning technologies, and energy - Emphasizes the structural, morphological and compositional properties of nanofibers and their effect on device performance

Download or read book Renewable Polymers and Polymer Metal Oxide Composites written by Sajjad Haider and published by Elsevier. This book was released on 2022-03-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Polymers and Polymer-Metal Oxide Composites: Synthesis, Properties, and Applications serves as a reference on the key concepts of the advances of polymer-oxide composites. The book reviews knowledge on polymer-composite theory, properties, structure, synthesis, and their characterization and applications. There is an emphasis on coupling metal oxides with polymers from renewable sources. Also, the latest advances in the relationship between the microstructure of the composites and the resulting improvement of the material's properties and performance are covered. The applications addressed include desalination, tissue engineering, energy storage, hybrid energy systems, food, and agriculture. This book is suitable for early-career researchers in academia and R&D in industry who are working in the disciplines of materials science, engineering, chemistry and physics. - Provides basic principles, theory and synthetic methods of composite materials, polymer composites and metal oxides - Reviews the latest advances in polymer-oxide-based applications in medicine, water treatment, energy and sensing - Discusses materials from renewable resources, including lifecycle assessment, economic aspects and potential application in tissue engineering, photovoltaics and food packaging

Download or read book Integrated Multiferroic Heterostructures and Applications written by Ming Liu and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by well-known experts in the field, this first systematic overview of multiferroic heterostructures summarizes the latest developments, first presenting the fundamental mechanisms, including multiferroic materials synthesis, structures and mechanisms, before going on to look at device applications. The resulting text offers insight and understanding for scientists and students new to this area.