Download or read book Macro and Micro Mechanics of High Velocity Deformation and Fracture written by Kozo Kawata and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Macro- and Micro-Mechanics of High Velocity Deformation and Fracture (MMMHVDF) (August 12 - 15, 1985) was held at Science Council of Japan, under the sponsor ship of IUTAM, Science Council of Japan, Japan Society for the Promotion of Science, The Commemorative Association for the Japan World Exposition (1970), and The Japan Society for Aeronautical and Space Sciences. The proposal of the symposium was accepted by the General Assembly of IUTAM, and the scientists mentioned below were appointed by the Bureau of IUTAM to serve as member of the Scientific Committee. The main object of the Symposium was to make a general survey of recent developments in the re search of high velocity solid mechanics and to explore further new ideas for dealing with unsettled problems, of fundamental nature as well as of practical importance. The subjects covered theoretical, experimental, and numerical fields in macro- and micro-mechanics associated with high velocity de formatio~ and fracture in soldis, covering metals, ceramics, polymers, and composites.
Download or read book High Velocity Deformation of Solids written by K. Kawata and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials written by André Pineau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the revised and updated version of the first detailed study of the mechanics and modes of adiabatic shear localization in solids. Building on the success of the first edition, the book provides a systematic description of a number of aspects of adiabatic shear banding. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. Specific chapters focus on energetic materials, polymers, bulk metal glasses, and the mathematics of shear banding as well as the numerical modeling of them. With its detailed coverage of the subject, this book is of great interest to academics and researchers into materials performance as well as professionals. Up-to-date coverage of the subject and research that has occurred over the past 20 years Each chapter is written on a different sub-field of adiabatic shear by an acknowledged expert in the field Detailed and clear discussions of each aspect
Download or read book Constitutive Relation in High Very High Strain Rates written by Kozo Kawata and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Constitutive Relation in High/Very High Strain Rates (CRHVHSR) was held October 16 - 19, 1995, at Seminar House, Science University of Tokyo, under the sponsorship of IUTAM, Japan Society for the Promotion of Science, The Commemorative Association for the Japan World Exposition (1970), Inoue Foundation for Science, The Japan Society for Aeronautical and Space Sciences, and Science University of Tokyo. The proposal to hold the symposium was accepted by the General Assembly of IUT AM held in Haifa, Israel, in August 1992, and the scientists mentioned below were appointed by the Bureau of IUTAM to serve as members of the Scientific Committee. The main object of the symposium was to make a general survey of recent developments in the research of constitutive relations in high and very high strain rates and related problems in high velocity solid mechanics, and to explore further new ideas for dealing with unresolved problems of a fundamental nature as well as of practical importance. The subjects covered theoretical, experimental, and numerical fields in the above-mentioned problems in solids, covering metals, polymers, ceramics, and composites. Emphasis was given to the following fields: 1. Material characterization of solids in high velocity deformation, experimental techniques, typical data obtained by these techniques, modeling, and constitutive relations 2. Strain rate dependent elasto-visco-plastic stress waves 3. Crack initiation, propagation, and dynamic fracture toughness 4. Dynamic stress concentration 5. Structural dynamics in impact and constitutive relations of solids 6.
Download or read book Mechanical Behaviour of Materials VI written by M. Jono and published by Elsevier. This book was released on 2013-10-22 with total page 3510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.
Download or read book Structural Failure written by H.P. Rossmanith and published by CRC Press. This book was released on 2002-11-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing interest in the overlap between technical, legal and insurance aspects of technology and engineering is reflected in the formation of the new International Society for Technology, Law and Insurance (ISTLI). This book forms the proceedings of the founding symposium and contains wide ranging papers from engineers, lawyers, and other specialists in insurance, technical approvals and product liability.
Download or read book Shock Wave and High Strain Rate Phenomena in Materials written by 0 Meyers, and published by CRC Press. This book was released on 2023-07-21 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of EXPLOMET 90, the International Conference on the Materials Effects of Shock-Wave and High-Strain-Rate Phenomena, held August 1990, in La Jolla, California, represent a global and up-to-date appraisal of this field. Contributions (more than 100) deal with high-strain-rate deforma
Download or read book Elastic Wave Propagation written by F. McCarthy and published by Elsevier. This book was released on 2018-06-20 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a timely collection of research papers on the latest developments in the ever-increasing use of elastic waves in a variety of contexts. There are reports on wave-propagation in various types of media: in both isotropic and anisotropic bodies; in homogeneous and inhomogeneous media; in media with cracks or inclusions in random media; and in layered composites.The bulk of the papers are concerned with propagation in elastic media, but also included are viscoelastic, thermoelastic and magneto-electroelastic wave propagation, as well as waves in porous and piezo-electric bodies. Consideration is given to propagation in bodies as diverse as stretched elastic strings to surfaces such as thin walled cylinders, and thin films under stress. Applications considered include the determination of the depth of cracks; analysis of ground motions generated by a finite fault in seismology; surface wave spreading on piezo-electric solids; and dynamical stress intensity factors. Most of the papers are theoretical in nature, and many are complemented by numerical studies. Also included are a general survey on experimental techniques, and reports on experimental work.The volume will be of interest to those who do theoretical studies of elastic wave propagation and to those who apply elastic waves whether in seismology, non-destructive testing, the fabrication of devices or underwater acoustics, etc.
Download or read book Fracture of Engineering Materials and Structures written by S.H. Teoh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the field of fracture of engineering materials and structures have increasingly indicated its multidisciplinary nature. This area of research now involves scientists and engineers who work in materials science, applied mathematics and mechanics, and also computer scientists. The present volume, which contains the Proceedings of the Joint FEFG/lCF International Conference on Fracture of Engineering Materials and Structures held in Singapore from the 6th to 8th of August 1991, is a testimony of this multidisciplinary nature. This International Conference was the Second Symposium of the Far East Fracture Group (FEFG) and thus provided a unique opportunity for researchers and engineers in the Far East region to exchange and acquire knowledge of new advances and applications in fracture. The Conference was also the Inter-Quadrennial International Conference on Fracture (ICF) for 1991 and thus appealed to researchers in the international arena who wished to take advantage of this meeting to present their findings. The Conference has brought together over 130 participants from more than 24 countries, and they represented government and industrial research laboratories as well as academic institutions. It has thus achieved its objective of bringing together scientists and engineers with different backgrounds and perspectives but with . a common interest in new developments in the fracture of engineering materials and structures. This volume contains 4 keynote papers, 4 invited papers and 130 contributed papers.
Download or read book Materials at High Strain Rates written by T.Z. Blazynski and published by Springer Science & Business Media. This book was released on 1987-07-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Meso Mechanics of Damage and Failure How Microdamage Induces Disaster written by Yilong Bai and published by Springer Nature. This book was released on 2019-09-03 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a trans-scale framework necessary for the physical understanding of breakdown behaviors and presents some new paradigm to clarify the mechanisms underlying the trans-scale processes. The book, which is based on the interaction of mechanics and statistical physics, will help to deepen the understanding of how microdamage induces disaster and benefit the forecasting of the occurrence of catastrophic rupture. It offers notes and problems in each part as interesting background and illustrative exercises. Readers of the book would be graduate students, researchers, engineers working on civil, mechanical and geo-engineering, etc. However, people with various background but interested in disaster reduction and forecasting, like applied physics, geophysics, seismology, etc., may also be interested in the book.
Download or read book Field Theory of Multiscale Plasticity written by Tadashi Hasebe and published by Cambridge University Press. This book was released on 2023-05-31 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides a concise and systematic treatment of foundational material on dislocations and metallurgy and an up-to-date discussion of multiscale modeling of materials, which ultimately leads to the field theory of multiscale plasticity (FTMP). Unlike conventional continuum models, this approach addresses the evolving inhomogeneities induced by deformation, typically as dislocation substructures like dislocation cells, as well as their interplay at more than one scale. This is an impressively visual text with many and varied examples and viewgraphs. In particular, the book presents a feasible constitutive model applicable to crystal plasticity-based finite element method (FEM) simulations. It will be an invaluable resource, accessible to undergraduate and graduate students as well as researchers in mechanical engineering, solid mechanics, applied physics, mathematics, materials science, and technology.
Download or read book Theoretical Experimental and Numerical Contributions to the Mechanics of Fluids and Solids written by James Casey and published by Birkhäuser. This book was released on 2012-12-06 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue of ZAMP is published to honor Paul M. Naghdi for his contributions to mechanics over the last forty years and more. It is offered in celebration of his long, productive career in continuum mechan ics; a career which has been marked by a passion for the intrinsic beauty of the subject, an uncompromising adherence to academic standards, and an untiring devotion to our profession. Originally, this issue was planned in celebration of Naghdi's 70th birthday, which occurred on 29 March 1994. But, as the papers were being prepared for the press, it became evident that the illness from which Professor Naghdi had been suffering during recent months was extremely serious. On 26 May 1994, a reception took place in the Department of Mechanical Engineering at Berkeley, at which Naghdi received The Berkeley Citation (which is given in lieu of an honorary degree) and where he was also presented with the Table of Contents of the present collection. Subse quently, he had the opportunity to read the papers in manuscript form. He was very touched that his colleagues had chosen to honor him with their fine contributions. The knowledge that he was held in such high esteem by his fellow scientists brought a special pleasure and consolation to him in his last weeks. On Saturday evening, 9 July 1994, Paul Naghdi succumbed to the lung cancer which he had so courageously endured.
Download or read book Crystal Plasticity written by Wojciech Polkowski and published by MDPI. This book was released on 2021-04-27 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 25 original papers (including one review paper) on state-of-the art achievements in the theory and practice of crystals plasticity. The articles cover a wide scope of research on materials behavior subjected to external loadings, starting from atomic-scale simulations, and a new methodological aspect, to experiments on a structure and mechanical response upon a large-scale processing. Thus, a presented contribution of researchers from 18 different countries can be virtually divided into three groups, namely (i) “modelling and simulation”; (ii) “methodological aspects”; and (iii) “experiments on process/structure/properties relationship”. Furthermore, a large variety of materials are investigated including more conventional (steels, copper, titanium, nickel, aluminum, and magnesium alloys) and advanced ones (composites or high entropy alloys). The book should be interested for senior students, researchers and engineers working within discipline of materials science and solid state physics of crystalline materials.
Download or read book Mechanical Identification of Composites written by A. Vautrin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Stress Waves written by Lili Wang and published by Elsevier. This book was released on 2011-08-26 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of Foundations of Stress Waves is to give the reader an understanding of stress wave behaviour while taking into account the dynamic constitutive equations of elastic-plastic solids. The author has combined a 'materials characteristics' approach with a 'singularity surface' approach in this work, which readers will find to be a novel and unique route to solving their problems. Helps engineers understand the effects and behavior of stress waves in various materials Aids in the process of engineering design, testing, and evaluation
