Download or read book Yield Design written by Jean Salençon and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the middle of the 20th Century yield design approaches have been identified with the lower and upper bound theorem of limit analysis theory – a theory associated with perfect plasticity. This theory is very restrictive regarding the applicability of yield design approaches, which have been used for centuries for the stability of civil engineering structures. This book presents a theory of yield design within the original “equilibrium/resistance” framework rather than referring to the theories of plasticity or limit analysis; expressing the compatibility between the equilibrium of the considered structure and the resistance of its constituent material through simple mathematical arguments of duality and convex analysis results in a general formulation, which encompasses the many aspects of its implementation to various stability analysis problems. After a historic outline and an introductory example, the general theory is developed for the three-dimensional continuum model in a versatile form based upon simple arguments from the mathematical theory of convexity. It is then straightforwardly transposed to the one-dimensional curvilinear continuum, for the yield design analysis of beams, and the two-dimensional continuum model of plates and thin slabs subjected to bending. Field and laboratory observations of the collapse of mechanical systems are presented along with the defining concept of the multi-parameter loading mode. The compatibility of equilibrium and resistance is first expressed in its primal form, on the basis of the equilibrium equations and the strength domain of the material defined by a convex strength criterion along with the dual approach in the field of potentially safe loads, as is the highlighting of the role implicitly played by the theory of yield design as the fundamental basis of the implementation of the ultimate limit state design (ULSD) philosophy with the explicit introduction of resistance parameters. Contents 1. Origins and Topicality of a Concept. 2. An Introductory Example of the Yield Design Approach. 3. The Continuum Mechanics Framework. 4. Primal Approach of the Theory of Yield Design. 5. Dual Approach of the Theory of Yield Design. 6. Kinematic Exterior Approach. 7. Ultimate Limit State Design from the Theory of Yield Design. 8. Optimality and Probability Approaches of Yield Design. 9. Yield Design of Structures. 10. Yield Design of Plates: the Model. 11. Yield Design of Plates Subjected to Pure Bending. About the Authors Jean Salençon is Emeritus Professor at École polytechnique and École des ponts et chaussées, ParisTech, France. Since 2009 he has been a member of the Administrative Board of CNRS (Paris, France). He has received many awards including the Légion d’Honneur (Commander), Ordre National du Mérite (Officer) and Palmes Académiques (Commander). His research interests include structure analysis, soil mechanics and continuum mechanics.

Download or read book Optimization in Mechanics written by P. Brousse and published by Elsevier. This book was released on 2013-10-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization in Mechanics: Problems and Methods investigates various problems and methods of optimization in mechanics. The subjects under study range from minimization of masses and stresses or displacements, to maximization of loads, vibration frequencies, and critical speeds of rotating shafts. Comprised of seven chapters, this book begins by presenting examples of optimization problems in mechanics and considering their application, as well as illustrating the usefulness of some optimizations like those of a reinforced shell, a robot, and a booster. The next chapter outlines some of the mathematical concepts that form the framework for optimization methods and techniques and demonstrates their efficiency in yielding relevant results. Subsequent chapters focus on the Kuhn Tucker theorem and duality, with proofs; associated problems and classical numerical methods of mathematical programming, including gradient and conjugate gradient methods; and techniques for dealing with large-scale problems. The book concludes by describing optimizations of discrete or continuous structures subject to dynamical effects. Mass minimization and fundamental eigenvalue problems as well as problems of minimization of some dynamical responses are studied. This monograph is written for students, engineers, scientists, and even self-taught individuals.

Download or read book Transactions of the International Conference on Structural Mechanics in Reactor Technology written by and published by . This book was released on 1979 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elastoplastic Modeling written by Jean Salencon and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structures hyperstatiques 2 me partie document de travail written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1976-02-01 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials and Building Research written by and published by . This book was released on 1979 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapports des commissions de travail written by International Association for Bridge and Structural Engineering and published by . This book was released on 1982 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dixi me congr s written by International Association for Bridge and Structural Engineering and published by . This book was released on 1976 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book La Mesure la S lection Et L usage de Param tres de Conception Dans la G otechnique written by and published by Thomas Telford Publishing. This book was released on 1980 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book M canique de propagation et de bifurcation des fissures written by RECHONaman and published by Lavoisier. This book was released on 2012-04-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les objectifs de la mécanique de la rupture sont double, d'une part ils concernent la description des champs mécaniques au voisinage de la pointe de la fissure et les énergies qui leur sont associées et d'autre part, ils traitent de l'évaluation de la nocivité d'une fissure en terme de la propagation de celle-ci. Deux champs d'étude constituent la structure de cet ouvrage, l'un relatif à la modélisation de la singularité induite par la pointe d'une fissure qui est relatée dans le premier tome intitulé : Modélisation des champs mécaniques en pointe de fissure et des singularités. Après un premier volume intitulé "Mécanique de la rupture par fissuration", ce deuxième tome traite des critères de propagation et de bifurcation de fissure en milieu élastique et élastoplastique sous des chargements monotones (Rupture fragile) et dynamique (Rupture par Fatigue). Les solutions analytiques obtenues ne peuvent pas être utilisées dans les structures à géométrie et conditions aux limites variées, alors il sera nécessaire de faire appel aux méthodes d'analyse numérique et plus particulièrement à la méthode des éléments finis. Deux chapitres abordent ces applications numériques : l'un, en tome I, relatif à l'introduction au calcul par éléments finis des structures fissurées et l'autre, dans le tome II traitant de la prévision de la rupture par fissuration des éléments de structures métalliques soumises à la fatigue.

Download or read book Revue roumaine des sciences techniques written by and published by . This book was released on 1969 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Erm dungsverhalten Von Stahl und Betonbauten written by and published by . This book was released on 1982 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A CANCAM 81 written by and published by . This book was released on 1981 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IABSE Structures written by and published by . This book was released on 1985 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Abhandlungen written by International Association for Bridge and Structural Engineering and published by . This book was released on 1966 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Berichte written by and published by CRC Press. This book was released on 1991 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Canadian Journal of Civil Engineering written by and published by . This book was released on 1991 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: