Download or read book Luminescence Lifetime Mapping of Optical Centres in Natural and Synthetic Diamond written by Gediminas Liaugaudas and published by . This book was released on 2011 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lifetimes of luminescence from nitrogen-related optical centres in diamond have been used as probes to study the optical properties of natural and synthetic diamond. Fluorescence lifetime imaging microscopy has been used to map the luminescence lifetime across the diamond samples with micro-metre spatial resolution. These data were supported by UV-VIS and FTIR absorption, and photo- and cathodoluminescence measurements of the samples. -- A study has been performed on the effects of the common forms of nitrogen in natural and synthetic diamond samples on visible luminescence from nitrogen-related optical centres. New data are reported on luminescence quenching via non-radiative energy transfer to the B-iiitrogen aggregates and to the single-atom form of nitrogen. The first quantitative determinations of the kinetics of energy transfer to these nitrogen-related defects from the visible luminescence centres (H4 and NV) arc made. These data are shown to allow the transformation of the luminescence lifetime maps into maps of the quenching defects, with micro-metre spatial resolution. -- A systematic study has been performed on growth-enhanced, brown CVD synthetic diamonds as-grown and after they had been annealed at 1200°C to 1800°C. The results show that optical centres grown into the bulk of the samples are affected by the annealing as could be predicted. However, unexpected, major changes in the distributions of the optical centres take place following annealing above 1600°C, when the brown colour is removed and the quality of the bulk of each sample is improved. These findings have implications for the opto¬electronic uses of the growth-enhanced CVD diamond. -- The lifetimes of the 467 nm centre characteristic of CVD diamond and the well known '3H' radiation-damage product are reported for the first time, allowing estimates of the concentration of the centres to be made from the strength of absorption in these centres.

Download or read book Luminescence Decay Times of Optical Centres in Natural and Synthetic Diamond written by Michael David Crossfield and published by . This book was released on 1981 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optical Properties of Diamond written by A.M. Zaitsev and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the most comprehensive compilation of data on the optical properties of diamond ever written. It presents a multitude of data previously for the first time in English. The author provides quick access to the most comprehensive information on all aspects of the field.

Download or read book Chemical State and Luminescence Imaging of Natural and Synthetic Diamond written by Geraint Owen Jones and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents work undertaken using Synchrotron and Laboratory basedtechniques in parallel on the Chemical State and Luminescence Imaging of Naturaland Synthetic Diamond. X-ray absorption spectroscopy (XAS) techniques haverevealed information on the chemical structure and bonding within brown andvariegated type Ia, IIa, CVD and high-pressure, high-temperature (HPHT) treateddiamonds. XAS, Raman, X-ray Excited Optical Luminescence (XEOL) and Photoluminescence(PL) are some of the techniques that have been applied to characterise and investigatethe cause of the brown colouration. The XAS measurements have been undertaken in imaging mode with the capabilitiesof correlating the luminescence image with the brown regions in partial luminescenceyield (PLY) and total luminescence yield (TLY). OD-XAS spectrums have beenobtained at non-brown and brown regions and have revealed a higher concentration ofsp2-bonded carbon present at the brown sites. Raman spectroscopy utilized in imagingmode also supports this discovery.

Download or read book The bh TCSPC Handbook written by Dr. Wolfgang Becker and published by Becker & Hickl GmbH. This book was released on 2021-09-01 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-Correlated Single Photon Counting Modules SPC-130EMN, SPC-130EMNX, SPC-130IN, SPC-130INX, SPC-150N, SPC-150NX, SPC-150NXX, SPC-160, SPC-160PCIE, SPC-180N, SPC-180NX, SPC-180NXX Detectors, Lasers and Peripheral Devices Simple-Tau Systems Technical Principles TCSPC Applications FLIM Systems Applications in Life Sciences Clinical FLIM Applications SPCM Software SPCImage NG Data Analysis Software Time-correlated single photon counting (TCSPC) is an amazingly sensitive technique for recording low-level light signals with picosecond resolution and extremely high precision.TCSPC originates from the measurement of excited nuclear states and has been used since the late 60s [775, 1250]. For many years TCSPC was used primarily to record fluorescence decay curves of organic dyes in solution. Due to the low intensity and low repetition rate of the light sources and the limited speed of the electronics of the 70s and 80s the acquisition times were extremely long. More important, classic TCSPC was intrinsically one-dimensional, i.e. limited to the recording of the waveform of a periodic light signal. Light sources ceased to be a limitation when the first mode-locked Argon lasers and synchronously pumped dye lasers were introduced. For the recording electronics, the situation changed with the introduction of the SPC-300 modules of Becker & Hickl in 1993. Due to a new analog-to-digital conversion principle these modules could be used at photon count rates almost 100 times higher than the classic TCSPC devices. Moreover, the modules were able to record the photons of a large number of detectors simultaneously. They were thus able to record a photon distribution not only versus the time in a fluorescence decay but also versus aspatial coordinate or the wavelength of the photons. Multi-dimensional TCSPC was born. Within a few years, more dimensions were added to multidimensional TCSPC. Fast sequential recording was introduced with the SPC-430 in 1995, fast scanning with the SPC-535 in 1997. Time-tag recording was introduced with the SPC-431 in 1996; multi-module TCSPC systems followed in 1999. Since then, the Becker & Hickl TCSPC systems became bigger, faster and more flexible. Recent TCSPC modules, like the SPC-150NX or the SPC-180, can be configured for sequential recording, imaging, or time-tag recording by a simple software command. Multi-module systems, like the SPC-134EM and SPC-154, can be used for scanning at unprecedented count rates and acquisition speeds. Nevertheless, TCSPC still has the reputation to be an extremely sluggish technique unable to record any fast changes in the fluorescence or scattering behaviour of a sample. The multidimensional features of modern TCSPC are not commonly understood. Thus, many users do not make efficient use of their SPC modules. However, if appropriately used, multidimensional TCSPC techniques not only deliver superior results but also solve highly sophisticated measurement problems. This handbook is an attempt to help existing and potential users understand and make use of the advanced features of modern TCSPC. After an introduction into the bh TCSPC devices and associated detector, laser, and experiment control modules the principles of advanced TCSPC techniques are described. These include multidetector TCSPC, multiplexed TCSPC, sequential recording techniques, scanning techniques, parameter-tag recording, and multi-module TCSPC techniques. The next chapter describes the architecture of the bh SPC modules. A chapter about detectors gives a review of detector principles and of the parameters used to characterise detectors. It describes a number of detectors commonly used for TCSPC and gives advice about obtaining best performance from them. The implementation of bh SPC devices is described in the next part of the handbook. It includes principles and wiring diagrams for typical experiments, guidelines for first system setup, and advice for system optimisation. It describes dead-time, counting loss, and pile-up effects, detector effects, and effects related to the optical system. The next chapter of the handbook is dedicated to TCSPC applications. The first part of this chapter describes the measurement of fluorescence and anisotropy decay curves, multispectral lifetime experiments, recording of transient fluorescence lifetime phenomena, and measurements of phosphorescence decay curves. The second part of the chapter is dedicated to time-resolved laser scanning microscopy. It contains sections on a wide variety of fluorescence-lifetime imaging (FLIM) experiments and procedures, such as FLIM with various excitation principles, excitation sources, and detection principles, high-speed and time-series FLIM, Z-stack FLIM, simultaneous fluorescence and phosphorescence lifetime imaging (FLIM/PLIM), fluorescence lifetime-transient scanning (FLITS), and FLIM with special microscope configurations. A third part contains FLIM background knowledge: Signal-to-noise ratio, acquisition time, the effect of counting loss and pile-up, photobleaching, and fluorescence depolarisation on the recorded data. The book contains a large chapter on TCSPC applications, most of them in Biology. It contains sections on FLIM of molecular environment parameters in tissue, FLIM-based FRET measurements in cells, autofluorescence FLIM of biological tissue, plant physiology, and clinical FLIM applications. A section about diffuse optical tomography (DOT) by NIRS techniques includes breast imaging, static and functional brain imaging, perfusion measurement in the human brain, diffuse tissue spectroscopy, and small-animal imaging. Picosecond photon correlation, fluorescence correlation spectroscopy, burst-integrated fluorescence lifetime techniques, and photon counting histogram techniques are reviewed in the next sections. The last part of the application chapter gives an review of non-biological TCSPC applications like positron lifetime measurement, measurement of barrier discharges, remote sensing, metrological applications, and characterisation of detectors. The application chapter also includes practical hints about optical systems, detectors, and other technical aspects of the applications described. Another large chapter describes the SPCM operating software of the bh SPC modules. It describes the various user interface configurations, operation modes, the system and control parameters, the handling and display of the multidimensional data recorded by the modules, and the associated data file structure. The TCSPC Handbook also contains a chapter on the SPCImage NG fluorescence decay and FLIM data analysis software. It describes the general principles of fluorescence decay analysis, the calculation of fluorescence decay parameters and lifetime images by various decay models, pseudo-global analysis, multi-wavelength FLIM analysis, batch-processing of FLIM series, and analysis of PLIM data. The handbook ends with a list of more than 1200 references related to TCSPC, most of them being applications of the bh SPC devices.

Download or read book Spectroscopic Studies of Interstitial related Optical Centres in Synthetic Diamond written by Amad Dahwich and published by . This book was released on 2005 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plasmon Coupling Physics written by Martin Hÿtch and published by Academic Press. This book was released on 2022-06-16 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasmon Coupling Physics, Wave Effects and their Study by Electron Spectroscopies, Volume 222 in the Advances in Imaging and Electron Physics serial, merges two long-running serials, Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. The series features articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science, digital image processing, electromagnetic wave propagation, electron microscopy and the computing methods used in all these domains. Specific chapters in this release cover Phase retrieval methods applied to coherent imaging, X-ray phase-contrast imaging: a broad overview of some fundamentals, Graphene and borophene as nanoscopic materials for electronics – with review of the physics, and more. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Imaging and Electron Physics series - Updated release includes the latest information on the Plasmon Coupling Physics, Wave Effects and their Study by Electron Spectroscopies

Download or read book Optical Characterisation of Natural and Synthetic Diamonds written by Alexander Michael Connor and published by . This book was released on 2007 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluorescent Nanodiamonds written by Huan-Cheng Chang and published by John Wiley & Sons. This book was released on 2018-11-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive reference on fluorescent nanodiamond physical and chemical properties and contemporary applications Fluorescent nanodiamonds (FNDs) have drawn a great deal of attention over the past several years, and their applications and development potential are proving to be manifold and vast. The first and only book of its kind, Fluorescent Nanodiamonds is a comprehensive guide to the basic science and technical information needed to fully understand the fundamentals of FNDs and their potential applications across an array of domains. In demonstrating the importance of FNDs in biological applications, the authors bring together all relevant chemistry, physics, materials science and biology. Nanodiamonds are produced by powerful cataclysmic events such as explosions, volcanic eruptions and meteorite impacts. They also can be created in the lab by high-pressure high-temperature treatment of graphite or detonating an explosive in a reactor vessel. A single imperfection can give a nanodiamond a specific, isolated color center which allows it to function as a single, trapped atom. Much smaller than the thickness of a human hair, a nanodiamond can have a huge surface area that allows it to bond with a variety of other materials. Because of their non-toxicity, nanodiamonds may be useful in biomedical applications, such as drug delivery and gene therapy. The most comprehensive reference on a topic of rapidly increasing interest among academic and industrial researchers across an array of fields Includes numerous case studies and practical examples from many areas of research and industrial applications, as well as fascinating and instructive historical perspectives Each chapter addresses, in-depth, a single integral topic including the fundamental properties, synthesis, mechanisms and functionalisation of FNDs The first book published by the key patent holder with his research group in the field of FNDs Fluorescent Nanodiamonds is an important working resource for a broad range of scientists and engineers in industry and academia. It will also be a welcome reference for instructors in chemistry, physics, materials science, biology and related fields.

Download or read book Handbook of Photonics for Biomedical Engineering written by Aaron H.-P. Ho and published by Springer. This book was released on 2016-09-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics has emerged rapidly into technological mainstream with the advent and maturity of nanotechnology available in photonics and enabled many new exciting applications in the area of biomedical science and engineering that were unimagined even a few years ago with conventional photonic engineering techniques. Handbook of Nanophotonics in Biomedical Engineering is intended to be a reliable resource to a wealth of information on nanophotonics that can inspire readers by detailing emerging and established possibilities of nanophotonics in biomedical science and engineering applications. This comprehensive reference presents not only the basics of nanophotonics but also explores recent experimental and clinical methods used in biomedical and bioengineering research. Each peer-reviewed chapter of this book discusses fundamental aspects and materials/fabrication issues of nanophotonics, as well as applications in interfaces, cell, tissue, animal studies, and clinical engineering. The organization provides quick access to current issues and trends of nanophotonic applications in biomedical engineering. All students and professionals in applied sciences, materials, biomedical engineering, and medical and healthcare industry will find this essential reference book highly useful.

Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Newnes. This book was released on 2014-02-01 with total page 1809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.

Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.

Download or read book Luminescence written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2016-11-10 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to give readers a broad review of topical worldwide advancements in theoretical and experimental facts, instrumentation and practical applications erudite by luminescent materials and their prospects in dealing with different types of luminescence like photoluminescence, electroluminescence, thermo-luminescence, triboluminescence, bioluminescence design and applications. The additional part of this book deals with the dynamics, rare-earth ions, photon down-/up-converting materials, luminescence dating, lifetime, bioluminescence microscopical perspectives and prospects towards the basic research or for more advanced applications. This book is divided into four main sections: luminescent materials and their associated phenomena; photo-physical properties and their emerging applications; thermoluminescence dating: from theory to applications, and bioluminescence perspectives and prospects. Individual chapters should serve the broad spectrum of common readers of diverse expertise, layman, students and researchers, who may in this book find easily elucidated fundamentals as well as progressive principles of specific subjects associated with these phenomena. This book was created by 14 contributions from experts in different fields of luminescence and technology from over 20 research institutes worldwide.

Download or read book High Sensitivity Magnetometers written by Asaf Grosz and published by Springer. This book was released on 2016-09-20 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers, for the first time, an overview of nearly all of the magnetic sensors that exist today. The book is offering the readers a thorough and comprehensive knowledge from basics to state-of-the-art and is therefore suitable for both beginners and experts. From the more common and popular AMR magnetometers and up to the recently developed NV center magnetometers, each chapter is describing a specific type of sensor and providing all the information that is necessary to understand the magnetometer behavior including theoretical background, noise model, materials, electronics, design and fabrication techniques, etc.

Download or read book Optical Chemical Sensors written by F. Baldini and published by Springer Science & Business Media. This book was released on 2006-05-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers optical chemical sensing by means of optical waveguides, from the fundamentals to the most recent applications. The book includes a historical review of the development of these sensors, from the earliest laboratory prototypes to the first commercial instrumentations. The book reprints a lecture by the Nobel Laureate Charles Townes on the birth of maser and laser, which lucidly illustrates the development of new science and new technology.

Download or read book Sophie s World written by Jostein Gaarder and published by Farrar, Straus and Giroux. This book was released on 2007-03-20 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: A page-turning novel that is also an exploration of the great philosophical concepts of Western thought, Jostein Gaarder's Sophie's World has fired the imagination of readers all over the world, with more than twenty million copies in print. One day fourteen-year-old Sophie Amundsen comes home from school to find in her mailbox two notes, with one question on each: "Who are you?" and "Where does the world come from?" From that irresistible beginning, Sophie becomes obsessed with questions that take her far beyond what she knows of her Norwegian village. Through those letters, she enrolls in a kind of correspondence course, covering Socrates to Sartre, with a mysterious philosopher, while receiving letters addressed to another girl. Who is Hilde? And why does her mail keep turning up? To unravel this riddle, Sophie must use the philosophy she is learning—but the truth turns out to be far more complicated than she could have imagined.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.