Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.
Download or read book Tribology Data Handbook written by E. Richard Booser and published by CRC Press. This book was released on 1997-09-26 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a useful aid for anyone working to achieve more effective lubrication, better control of friction and wear, and a better understanding of the complex field of tribology. Developed in cooperation with the Society of Tribologists and Lubrication Engineers and containing contributions from 74 experts in the field, the Tribology Data Handbook covers properties of materials, lubricant viscosities, and design, friction and wear formulae. The broad scope of this handbook includes military, industrial and automotive lubricant specifications; evolving areas of friction and wear; performance and design considerations for machine elements, computer storage units, and metal working; and more. Important guidelines for the monitoring, maintenance, and failure assessment of lubrication in automotive, industrial, and aircraft equipment are also included. Current environmental and toxicological concerns complete this one-stop reference. With hundreds of figures, tables, and equations, as well as essential background information explaining the information presented, this is the only source you need to find virtually any tribology information.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Lubricants and Testing written by George E. Totten and published by . This book was released on 2012 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology and Characterization of Surface Coatings written by Sarfraj Ahmed and published by John Wiley & Sons. This book was released on 2022-01-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.
Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-09-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.
Download or read book Automotive Lubricants Reference Book written by Arthur J. Caines and published by John Wiley & Sons. This book was released on 2004 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive lubricants arena has undergone significant changes since the first edition of this book was published in 1996. Environmental concerns, particularly reagarding improvement of ar quality have been important in recent years, Reduced emmissions are directly related to changes in lubricant specifications and quality, and the second edition of the Automotive Lubricants Reference Book reflects the urgency of such matters by including updated and expanded detail. This second edition also considers the recent phenomenon of increased consolidation within the oil and petroleum additive arenas, which has resulted in fewer poeple for research, devlopment, and implementation, along with fewer competing companies. After reviewing the first edition the authors have fully reviewed and updated the information to fit in with the changes in technology and markets. Chapters include, Introduction and Fundamentals Constituents of Modern Lubricants Crankcase Oil Testing Crankcase Oil Quality Levels and Formulations Practical Experiences with Lubricant Problems Performance Levels, Classification, Specification, and Approval of Engine Lubricants. Other Lubricants for Road Vehicles Other Specialized Oils of Interest Blending, Storage, Purchase, and Use Safety Health, and the Environment The Future.
Download or read book Emerging Trends in Science Engineering and Technology written by S Sathiyamoorthy and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.
Download or read book Lubrication Corrosion and Wear written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1965 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Lubrication and Tribology Volume II written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental pr
Download or read book CRC Handbook of Lubrication and Tribology Volume III written by E. Richard Booser and published by CRC Press. This book was released on 1993-12-21 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume III extends this handbook series to cover new developments and topics in tribology that have occurred during the past decade. It includes in-depth discussions on revolutionary magnetic bearings used in demanding applications in compressors, high-speed spindles, and aerospace equipment. Extensive coverage is given to tribology developments in office machines and in magnetic storage systems for computers. Monitoring sensors are addressed in the first chapter, followed by chapters on specific monitoring techniques for automobiles, diesels, and rotating machines. One chapter is devoted to procedures used for tracking the remaining life of lubricants. Synthetic lubricants are discussed by outstanding specialists in this rapidly developing field. Synthetics are increasingly important in widely diverse areas, including compressors using the new ozone-layer-friendly refrigerants and a variety of extreme-temperature and environmentally-sensitive applications. Water- and gas-lubricated bearings are given similar attention. The contributors also develop a new, unified coverage for fatigue life of ball and roller bearings; for design and application of porous metal bearings; for self-contained lubrication, involving oil rings, disks, and wicks; and for plastic bearings. Each of these classes of bearings are used by the millions daily throughout industry. The three-volume handbook is an essential reference to tribologists and lubrication, mechanical, and automotive engineers. It is invaluable to lubricant suppliers; bearing companies; those working in the aerospace industry; and anyone concerned with machine design, machinery wear, and maintenance.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has preceded an understanding ofthe scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding oflubricants.
Download or read book 2nd International Symposium on Fuels and Lubricants Vol I written by S. P. Srivastava and published by Allied Publishers. This book was released on 2000 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Comprehensive Review of Lubricant Chemistry Technology Selection and Design written by Syed Q. A. Rizvi and published by . This book was released on 2009 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuels and Lubricants Handbook written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
