Download or read book Low Noise Clocking for High Speed Serial Links written by Merrick Brownlee and published by . This book was released on 2006 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are important as bit periods continue to shrink. Furthermore, in order for these circuits to have a true impact on the performance of the system, they must use unique architectures to achieve timing accuracy rather than simply trading power consumption for performance. This thesis discusses issues related to the timing circuits on both the transmit and receive side of the link. On the transmit side, a phase-locked loop (PLL) is used to generate the clock that tells the driver when to start and stop driving the current bit onto the channel. On the receive side, a clock and data recovery (CDR) circuit is responsible for properly centering the sampling clock in the middle of the bit period. Design techniques to achieve good timing performance in both the PLL and CDR are proposed. Specifically, the PLL incorporates a supply regulated tuning scheme to combat the high levels of supply noise present in large digital chips and a resistor-based charge pump to reduce the charge pump flicker noise contribution. The CDR uses oversampling to decouple the tradeoff between two important performance metrics: jitter generation and jitter tolerance. To validate the proposed ideas, both a PLL test chip and a CDR test chip are presented. The PLL operates from 0.5GHz to 2.5GHz and achieves 2.36ps rms jitter using a ring voltage-controlled oscillator. The power consumption scales favorably with frequency, using much less power at lower frequencies where less power is needed. The CDR operates up to 3.6Gbps with a BER of less than 10[superscript -12]. The measured jitter tolerance corner frequency was improved by a factor of 30 from 1MHz to 30MHz without increasing the recovered clock jitter.

Download or read book Design of High speed Serial Links in CMOS written by Chih-Kong Ken Yang and published by . This book was released on 1998 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demand for bandwidth in serial links has been increasing as the communications industry demand higher quantity and quality of information. Whereas traditional gigabit per second links has been in bipolar or GaAs, this research aims to push the use of CMOS process technology in such links. Intrinsic gate speed limitations are overcome by parallelizing the data. The on-chip frequency is maintained at a fraction (1/16) of the off-chip data rate. Clocks with carefully controlled phases tapped from a local ring oscillator are driven to a bank of input samplers to convert the serial bit stream into parallel data. Similarly, the overlap of multiple-phased clocks are used to synchronize the multiplexing of the parallel data onto the transmission line. To perform clock/data recovery, data is further oversampled with finer phase separation and passed to digital logic. The digital logic operates upon the samples to detect transitions in the bit stream to track the bit boundaries. This tracking can operate at the cycle rate of the digital logic allowing robustness to systematic phase noise. The challenge lies in the capturing of the high frequency data stream and generating low jitter, accurately spaced clock edges. A test chip is built demonstrating the transmission and recovery of a 4.0-Gb/s bit streams with

Download or read book Efficient Test Methodologies for High Speed Serial Links written by Dongwoo Hong and published by Springer Science & Business Media. This book was released on 2009-12-24 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient Test Methodologies for High-Speed Serial Links describes in detail several new and promising techniques for cost-effectively testing high-speed interfaces with a high test coverage. One primary focus of Efficient Test Methodologies for High-Speed Serial Links is on efficient testing methods for jitter and bit-error-rate (BER), which are widely used for quantifying the quality of a communication system. Various analysis as well as experimental results are presented to demonstrate the validity of the presented techniques.

Download or read book CMOS Continuous Time Adaptive Equalizers for High Speed Serial Links written by Cecilia Gimeno Gasca and published by Springer. This book was released on 2014-09-22 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the design of adaptive equalization solutions integrated in standard CMOS technology for high-speed serial links. Since continuous-time equalizers offer various advantages as an alternative to discrete-time equalizers at multi-gigabit rates, this book provides a detailed description of continuous-time adaptive equalizers design - both at transistor and system levels-, their main characteristics and performances. The authors begin with a complete review and analysis of the state of the art of equalizers for wireline applications, describing why they are necessary, their types, and their main applications. Next, theoretical fundamentals of continuous-time adaptive equalizers are explored. Then, new structures are proposed to implement the different building blocks of the adaptive equalizer: line equalizer, loop-filters, power comparator, etc. The authors demonstrate the design of a complete low-power, low-voltage, high-speed, continuous-time adaptive equalizer. Finally, a cost-effective CMOS receiver which includes the proposed continuous-time adaptive equalizer is designed for 1.25 Gb/s optical communications through 50-m length, 1-mm diameter plastic optical fiber (POF).

Download or read book Jitter Noise and Signal Integrity at High Speed written by Mike Peng Li and published by Pearson Education. This book was released on 2007-11-19 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art JNB and SI Problem-Solving: Theory, Analysis, Methods, and Applications Jitter, noise, and bit error (JNB) and signal integrity (SI) have become today‘s greatest challenges in high-speed digital design. Now, there’s a comprehensive and up-to-date guide to overcoming these challenges, direct from Dr. Mike Peng Li, cochair of the PCI Express jitter standard committee. One of the field’s most respected experts, Li has brought together the latest theory, analysis, methods, and practical applications, demonstrating how to solve difficult JNB and SI problems in both link components and complete systems. Li introduces the fundamental terminology, definitions, and concepts associated with JNB and SI, as well as their sources and root causes. He guides readers from basic math, statistics, circuit and system models all the way through final applications. Emphasizing clock and serial data communications applications, he covers JNB and SI simulation, modeling, diagnostics, debugging, compliance testing, and much more.

Download or read book Design Of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.

Download or read book Radiation Hardened CMOS Integrated Circuits for Time Based Signal Processing written by Jeffrey Prinzie and published by Springer. This book was released on 2018-04-26 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art techniques for radiation hardened high-resolution Time-to-Digital converters and low noise frequency synthesizers. Throughout the book, advanced degradation mechanisms and error sources are discussed and several ways to prevent such errors are presented. An overview of the prerequisite physics of nuclear interactions is given that has been compiled in an easy to understand chapter. The book is structured in a way that different hardening techniques and solutions are supported by theory and experimental data with their various tradeoffs. Based on leading-edge research, conducted in collaboration between KU Leuven and CERN, the European Center for Nuclear Research Describes in detail advanced techniques to harden circuits against ionizing radiation Provides a practical way to learn and understand radiation effects in time-based circuits Includes an introduction to the underlying physics, circuit design, and advanced techniques accompanied with experimental data

Download or read book High Speed Serdes Devices and Applications written by David Robert Stauffer and published by Springer Science & Business Media. This book was released on 2008-12-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simplest method of transferring data through the inputs or outputs of a silicon chip is to directly connect each bit of the datapath from one chip to the next chip. Once upon a time this was an acceptable approach. However, one aspect (and perhaps the only aspect) of chip design which has not changed during the career of the authors is Moore’s Law, which has dictated substantial increases in the number of circuits that can be manufactured on a chip. The pin densities of chip packaging technologies have not increased at the same pace as has silicon density, and this has led to a prevalence of High Speed Serdes (HSS) devices as an inherent part of almost any chip design. HSS devices are the dominant form of input/output for many (if not most) high-integration chips, moving serial data between chips at speeds up to 10 Gbps and beyond. Chip designers with a background in digital logic design tend to view HSS devices as simply complex digital input/output cells. This view ignores the complexity associated with serially moving billions of bits of data per second. At these data rates, the assumptions associated with digital signals break down and analog factors demand consideration. The chip designer who oversimplifies the problem does so at his or her own peril.

Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.

Download or read book Phase Locked Loops written by Woogeun Rhee and published by John Wiley & Sons. This book was released on 2024-01-11 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the essential materials for phase-locked loop circuit design, from fundamentals to practical design aspects A phase-locked loop (PLL) is a type of circuit with a range of important applications in telecommunications and computing. It generates an output signal with a controlled relationship to an input signal, such as an oscillator which matches the phases of input and output signals. This is a critical function in coherent communication systems, with the result that the theory and design of these circuits are essential to electronic communications of all kinds. Phase-Locked Loops: System Perspectives and Circuit Design Aspects provides a concise, accessible introduction to PLL design. It introduces readers to the role of PLLs in modern communication systems, the fundamental techniques of phase-lock circuitry, and the possible applications of PLLs in a wide variety of electronic communications contexts. The first book of its kind to incorporate modern architectures and to balance theoretical fundamentals with detailed design insights, this promises to be a must-own text for students and industry professionals. The book also features: Coverage of PLL basics with insightful analysis and examples tailored for circuit designers Applications of PLLs for both wireless and wireline systems Practical circuit design aspects for modern frequency generation, frequency modulation, and clock recovery systems Phase-Locked Loops is essential for graduate students and advanced undergraduates in integrated circuit design, as well researchers and engineers in electrical and computing subjects.

Download or read book High Speed Devices and Circuits with THz Applications written by Jung Han Choi and published by CRC Press. This book was released on 2017-09-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the cutting-edge results of new device developments and circuit implementations, High-Speed Devices and Circuits with THz Applications covers the recent advancements of nano devices for terahertz (THz) applications and the latest high-speed data rate connectivity technologies from system design to integrated circuit (IC) design, providing relevant standard activities and technical specifications. Featuring the contributions of leading experts from industry and academia, this pivotal work: Discusses THz sensing and imaging devices based on nano devices and materials Describes silicon on insulator (SOI) multigate nanowire field-effect transistors (FETs) Explains the theory underpinning nanoscale nanowire metal-oxide-semiconductor field-effect transistors (MOSFETs), simulation methods, and their results Explores the physics of the silicon-germanium (SiGe) heterojunction bipolar transistor (HBT), as well as commercially available SiGe HBT devices and their applications Details aspects of THz IC design using standard silicon (Si) complementary metal-oxide-semiconductor (CMOS) devices, including experimental setups for measurements, detection methods, and more An essential text for the future of high-frequency engineering, High-Speed Devices and Circuits with THz Applications offers valuable insight into emerging technologies and product possibilities that are attractive in terms of mass production and compatibility with current manufacturing facilities.

Download or read book Electromagnetic Compatibility for Space Systems Design written by Nikolopoulos, Christos D. and published by IGI Global. This book was released on 2018-03-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aerospace industry, avoiding operating issues, especially in regard to space missions and satellite structures, is crucial. The vast majority of these issues can be traced to disturbances in the electromagnetic fields used. Electromagnetic Compatibility for Space Systems Design is a critical scholarly resource that examines the applications of electromagnetic compatibility and electromagnetic interference in the space industry. Featuring coverage on a wide range of topics, such as magnetometers, electromagnetic environmental effects, and electromagnetic shielding, this book is geared toward managers, engineers, and researchers seeking current research on the applications of electromagnetic technologies in the aerospace field.

Download or read book Semidigital Clock data Recovery System and Bandwidth Extension for Esd protected High speed Io Circuits written by and published by Ankit Srivastava. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Frequency Communication and Sensing written by Ahmet Tekin and published by CRC Press. This book was released on 2018-09-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Frequency Communication and Sensing: Traveling-Wave Techniques introduces novel traveling wave circuit techniques to boost the performance of high-speed circuits in standard low-cost production technologies, like complementary metal oxide semiconductor (CMOS). A valuable resource for experienced analog/radio frequency (RF) circuit designers as well as undergraduate-level microelectronics researchers, this book: Explains the basics of high-speed signaling, such as transmission lines, distributed signaling, impedance matching, and other common practical RF background material Promotes a dual-loop coupled traveling wave oscillator topology, the trigger mode distributed wave oscillator, as a high-frequency multiphase signal source Introduces a force-based starter mechanism for dual-loop, even-symmetry, multiphase traveling wave oscillators, presenting a single-loop version as a force mode distributed wave antenna (FMDWA) Describes higher-frequency, passive inductive, and quarter-wave-length-based pumped distributed wave oscillators (PDWOs) Examines phased-array transceiver architectures and front-end circuits in detail, along with distributed oscillator topologies Devotes a chapter to THz sensing, illustrating a unique method of traveling wave frequency multiplication and power combining Discusses various data converter topologies, such as digital-to-analog converters (DACs), analog-to-digital converters (ADCs), and GHz-bandwidth sigma-delta modulators Covers critical circuits including phase rotators and interpolators, phase shifters, phase-locked loops (PLLs), delay-locked loops (DLLs), and more It is a significantly challenging task to generate and distribute high-speed clocks. Multiphase low-speed clocks with sharp transition are proposed to be a better option to accommodate the desired timing resolution. High Frequency Communication and Sensing: Traveling-Wave Techniques provides new horizons in the quest for greater speed and performance.

Download or read book High Speed Digital System Design written by Anatoly Belous and published by Springer Nature. This book was released on 2019-11-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers the entire, interconnected complex of theoretical and practical aspects of designing and organizing the production of various electronic devices, the general and main distinguishing feature of which is the high speed of processing and transmitting of digital signals. The authors discuss all the main stages of design - from the upper system level of the hierarchy (telecommunications system, 5G mobile communications) to the lower level of basic semiconductor elements, printed circuit boards. Since the developers of these devices in practice deal with distorted digital signals that are transmitted against a background of interference, the authors not only explain the physical nature of such effects, but also offer specific solutions as to how to avoid such parasitic effects, even at the design stage of high-speed devices.

Download or read book High speed Optical Transceivers Integrated Circuits Designs And Optical Devices Techniques written by Yuyu Liu and published by World Scientific. This book was released on 2006-03-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the unique advantages and large inherent transmission capacity of optical fiber communication systems. The long-term and high-risk research challenges of optical transceivers are analyzed with a view to sustaining the seemingly insatiable demand for bandwidth. A broad coverage of topics relating to the design of high-speed optical devices and integrated circuits, oriented to low power, low cost, and small area, is discussed.Written by specialists with many years of research and engineering experience in the field of optical fiber communication, this book is essential for an audience dedicated to the development of integrated electronic systems for optical communication applications. It can also be used as a supplementary text for graduate courses on optical transceiver IC design.

Download or read book VLSI Circuits and Systems written by and published by . This book was released on 2003 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: