Download or read book Silicon Based RF Front Ends for Ultra Wideband Radios written by Aminghasem Safarian and published by Springer Science & Business Media. This book was released on 2007-12-28 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive study of silicon-based distributed architectures in wideband circuits are presented in this book. Novel circuit architectures for ultra-wideband (UWB) wireless technologies are described. The book begins with an introduction of several transceiver architectures for UWB. The discussion then focuses on RF front-end of the UWB radio. Therefore, the book will be of interest to RF circuit designers and students.

Download or read book Wireless Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.

Download or read book Circuits and Systems for Future Generations of Wireless Communications written by Aleksandar Tasic and published by Springer Science & Business Media. This book was released on 2009-05-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.

Download or read book Radio Frequency Integrated Circuit Design for Cognitive Radio Systems written by Amr Fahim and published by Springer. This book was released on 2015-03-03 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills an information gap on cognitive radios, since the discussion focuses on the implementation issues that are unique to cognitive radios and how to solve them at both the architecture and circuit levels. This is the first book to describe in detail cognitive radio systems, as well as the circuit implementation and architectures required to implement such systems. Throughout the book, requirements and constraints imposed by cognitive radio systems are emphasized when discussing the circuit implementation details. This is a valuable reference for anybody with background in analog and radio frequency (RF) integrated circuit design, needing to learn more about integrated circuits requirements and implementation for cognitive radio systems.

Download or read book Ultra Wideband written by Boris Lembrikov and published by BoD – Books on Demand. This book was released on 2010-09-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra wideband technology is one of the most promising directions in the rapidly developing modern communications. Ultra wideband communication system applications include radars, wireless personal area networks, sensor networks, imaging systems and high precision positioning systems. Ultra wideband transmission is characterized by high data rate, availability of low-cost transceivers, low transmit power and low interference. The proposed book consisting of 19 chapters presents both the state-of-the-art and the latest achievements in ultra wideband communication system performance, design and components. The book is addressed to engineers and researchers who are interested in the wide range of topics related to ultra wideband communications.

Download or read book Design of CMOS RFIC Ultra Wideband Impulse Transmitters and Receivers written by Cam Nguyen and published by Springer. This book was released on 2017-03-21 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of ultra-wideband (UWB) impulse-based transmitter and receiver frontends, operating within the 3.1-10.6 GHz frequency band, using CMOS radio-frequency integrated-circuits (RFICs). CMOS RFICs are small, cheap, low power devices, better suited for direct integration with digital ICs as compared to those using III-V compound semiconductor devices. CMOS RFICs are thus very attractive for RF systems and, in fact, the principal choice for commercial wireless markets. The book comprises seven chapters. The first chapter gives an introduction to UWB technology and outlines its suitability for high resolution sensing and high-rate, short-range ad-hoc networking and communications. The second chapter provides the basics of CMOS RFICs needed for the design of the UWB RFIC transmitter and receiver presented in this book. It includes the design fundamentals, lumped and distributed elements for RFIC, layout, post-layout simulation, and measurement. The third chapter discusses the basics of UWB systems including UWB advantages and applications, signals, basic modulations, transmitter and receiver frontends, and antennas. The fourth chapter addresses the design of UWB transmitters including an overview of basic components, design of pulse generator, BPSK modulator design, and design of a UWB tunable transmitter. Chapter 5 presents the design of UWB receivers including the design of UWB low-noise amplifiers, correlators, and a UWB 1 receiver. Chapter 6 covers the design of a UWB uniplanar antenna. Finally, a summary and conclusion is given in Chapter 7.

Download or read book Low Power RF Circuit Design in Standard CMOS Technology written by Unai Alvarado and published by Springer Science & Business Media. This book was released on 2011-10-18 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

Download or read book RF Circuits for 5G Applications written by Sangeeta Singh and published by John Wiley & Sons. This book was released on 2023-04-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF CIRCUITS FOR 5G APPLICATIONS This book addresses FinFET-based analog IC designing for fifth generation (5G) communication networks and highlights the latest advances, problems, and challenges while presenting the latest research results in the field of mmwave integrated circuits designing. The wireless communication sector is experiencing exponential expansion, particularly in the areas of mobile data and the 5G mobile network, creating fresh market possibilities for designing the integrated circuits (ICs) needed in the industry. Drawing from scientific literature and practical realization, this book explores FinFET-based analog IC designing for 5G communication networks and considers the latest breakthroughs and obstacles. It also presents the recent research trends and future roadmaps for the 5G communication circuits. RF Circuits for 5G Applications includes design guidelines to be considered when designing these circuits and detrimental scaling effects of the same. In addition, to enhance the usability of this book, the editors have included real-time problems in RFIC designing and case studies from experimental results, as well as clearly demarcated design guidelines for the 5G communication ICs designing. Audience The primary target audience includes researchers, postgraduate students, and industry professionals pursuing specializations in RF engineering, electronics engineering, electrical engineering, information, and communication technology.

Download or read book Radio Design in Nanometer Technologies written by Mohammed Ismail and published by Springer Science & Business Media. This book was released on 2007-06-16 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Design in Nanometer Technologies is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle", namely the entire chipset or single chip that builds an entire wireless system. This is the only way to successfully design radios to meet the stringent demands of today’s increasingly complex wireless systems.

Download or read book Parametric Analog Signal Amplification Applied to Nanoscale CMOS Technologies written by João P. Oliveira and published by Springer Science & Business Media. This book was released on 2012-01-07 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the analysis of parametric amplification with special emphasis on the MOS discrete-time implementation. This implementation is demonstrated by the presentation of several circuits where the MOS parametric amplifier cell is used: small gain amplifier, comparator with embedded pre-amplification, discrete-time mixer/IIR-Filter, and analog-to-digital converter (ADC). Experimental results are shown to validate the overall design technique.

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. - Emerging research topics in RF IC design and its potential application - Case studies and practical implementation examples - Covers fundamental building blocks of a cellular base station system and satellite infrastructure - Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face - References to specialist papers for further reading

Download or read book Ultra Wideband Radio Technologies for Communications Localization and Sensor Applications written by Reiner Thomä and published by BoD – Books on Demand. This book was released on 2013-03-13 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-Wideband Radio (UWB) earmarks a new radio access philosophy and exploits several GHz of bandwidth. It promises high data rate communication over short distances as well as innovative radar sensing and localization applications with unprecedented resolution. Fields of application may be found, among others, in industry, civil engineering, surveillance and exploration, for security and safety measures, and even for medicine. The book considers the basics and algorithms as well as hardware and application issues in the field of UWB radio technology for communications, localization and sensing based on the outcome of DFG's priority-funding program "Ultra-Wideband Radio Technologies for Communications, Localization and Sensor Applications (UKoLoS)".

Download or read book UWB Communication Systems written by Maria-Gabriella Di Benedetto and published by Hindawi Publishing Corporation. This book was released on 2006 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrawideband (UWB) communication systems offer an unprecedented opportunityto impact the future communication world. The enormous available bandwidth, the wide scope of the data rate / rangetrade-off, as well as the potential for very low-cost operation leading topervasive usage, all present a unique opportunity for UWB systems to impactthe way people and intelligent machines communicate and interact with theirenvironment. The aim of this book is to provide an overview of the state of the art of UWBsystems from theory to applications. Due to the rapid progress of multidisciplinary UWB research, such an overviewcan only be achieved by combining the areas of expertise of severalscientists in the field. More than 30 leading UWB researchers and practitioners have contributed tothis book covering the major topics relevant to UWB. These topics includeUWB signal processing, UWB channel measurement and modeling, higher-layerprotocol issues, spatial aspects of UWB signaling, UWB regulation andstandardization, implementation issues, and UWB applications as well aspositioning. The book is targeted at advanced academic researchers, wireless designers, and graduate students wishing to greatly enhance their knowledge of allaspects of UWB systems

Download or read book Microwave Circuits for 24 GHz Automotive Radar in Silicon based Technologies written by Vadim Issakov and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are continuous efforts focussed on improving road traffic safety worldwide. Numerous vehicle safety features have been invented and standardized over the past decades. Particularly interesting are the driver assistance systems, since these can considerably reduce the number of accidents by supporting drivers’ perception of their surroundings. Many driver assistance features rely on radar-based sensors. Nowadays the commercially available automotive front-end sensors are comprised of discrete components, thus making the radar modules highly-priced and suitable for integration only in premium class vehicles. Realization of low-cost radar fro- end circuits would enable their implementation in inexpensive economy cars, c- siderably contributing to traffic safety. Cost reduction requires high-level integration of the microwave front-end c- cuitry, specifically analog and digital circuit blocks co-located on a single chip. - cent developments of silicon-based technologies, e.g. CMOS and SiGe:C bipolar, make them suitable for realization of microwave sensors. Additionally, these te- nologies offer the necessary integration capability. However, the required output power and temperature stability, necessary for automotive radar sensor products, have not yet been achieved in standard digital CMOS technologies. On the other hand, SiGe bipolar technology offers excellent high-frequency characteristics and necessary output power for automotive applications, but has lower potential for - alization of digital blocks than CMOS.

Download or read book Design of Low Power Integrated Radios for Emerging Standards written by Mustafijur Rahman and published by Springer. This book was released on 2019-07-01 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes novel and disruptive architecture and circuit design techniques, toward the realization of low-power, standard-compliant radio architectures and silicon implementation of the circuits required for a variety of leading-edge applications. Readers will gain an understanding of the circuit level challenges that exist for low power radios, compatible with the IEEE 802.15.6 standard. The authors discuss current techniques to address some of these challenges, helping readers to understand the state-of-the-art, and to address the various, open research problems that exist with respect to realizing low power radios. Enables readers to face challenging bottleneck in low power radio design, with state-of-the-art, circuit-level design techniques; Provides readers with basic knowledge of circuits suitable for low power radio circuits compatible with the IEEE 802.15.6 standard; Discusses new and emerging architectures and circuit techniques, enabling applications such as body area networks and internet of things.

Download or read book Ultra Wideband Pulse based Radio written by Wim Vereecken and published by Springer Science & Business Media. This book was released on 2009-04-22 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s booming expanse of personal wireless radio communications is a rich source of new challenges for the designer of the underlying enabling te- nologies. Personal communication networks are designed from a fundam- tally different perspective than broadcast service networks, such as radio and television. While the focus of the latter is on reliability and user comfort, the emphasis of personal communication devices is on throughput and mobility. However, because the wireless channel is a shared transmission medium with only very limited resources, a trade-off has to be made between mobility and the number of simultaneous users in a con?ned geographical area. Accord- 1 ing to Shannon’s theorem on channel capacity, the overall data throughput of a communication channel bene?ts from either a linear increase of the tra- mission bandwidth, or an (equivalent) exponential increase in signal quality. Consequently, it is more bene?cial to think in terms of channel bandwidth than it is to pursue a high transmission power. All the above elements are embodied in the concept of spatial ef?ciency. By describing the throughput of a system 2 in terms of bits/s/Hz/m , spatial ef?ciency takes into account that the use of a low transmission power reduces the operational range of a radio transmission, and as such enables a higher reuse rate of the same frequency spectrum.

Download or read book CMOS Analog and Mixed Signal Circuit Design written by Arjuna Marzuki and published by CRC Press. This book was released on 2020-05-12 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide a complete working knowledge of the Complementary Metal-Oxide Semiconductor (CMOS) analog and mixed-signal circuit design, which can be applied for System on Chip (SOC) or Application-Specific Standard Product (ASSP) development. It begins with an introduction to the CMOS analog and mixed-signal circuit design with further coverage of basic devices, such as the Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET) with both long- and short-channel operations, photo devices, fitting ratio, etc. Seven chapters focus on the CMOS analog and mixed-signal circuit design of amplifiers, low power amplifiers, voltage regulator-reference, data converters, dynamic analog circuits, color and image sensors, and peripheral (oscillators and Input/Output [I/O]) circuits, and Integrated Circuit (IC) layout and packaging. Features: Provides practical knowledge of CMOS analog and mixed-signal circuit design Includes recent research in CMOS color and image sensor technology Discusses sub-blocks of typical analog and mixed-signal IC products Illustrates several design examples of analog circuits together with layout Describes integrating based CMOS color circuit