Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reflection High Energy Electron Diffraction and Reflection Electron Imaging of Surfaces written by P.K. Larsen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the NATO Advanced Research Workshop in "Reflection High Energy Electron Diffraction and Reflection Electron Imaging of Surfaces" held at the Koningshof conference center, Veldhoven, the Netherlands, June 15-19, 1987. The main topics of the workshop, Reflection High Energy Electron Diffraction (RHEED) and Reflection Electron Microscopy (REM), have a common basis in the diffraction processes which high energy electrons undergo when they interact with solid surfaces at grazing angles. However, while REM is a new technique developed on the basis of recent advances in transmission electron microscopy, RHEED is an old method in surface crystallography going back to the discovery of electron diffraction in 1927 by Davisson and Germer. Until the development of ultra high vacuum techniques in the 1960's made instruments using slow electrons more accessable, RHEED was the dominating electron diffraction technique. Since then and until recently the method of Low Energy Electron Diffraction (LEED) largely surpassed RHEED in popularity in surface studies. The two methods are closely related of course, each with its own specific advantages. The grazing angle geometry of RHEED has now become a very useful feature because this makes it ideally suited for combination with the thin growth technique of Molecular Beam Epitaxy (MBE). This combination allows in-situ studies of freshly grown and even growing surfaces, opening up new areas of research of both fundamental and technological importance.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1967 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solvay Conference on Surface Science written by Frederick W. de Wette and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles collected in this volume give a broad overview of the current state of surface science. Pioneers in the field and researchers met together at this Solvay Conference to discuss important new developments in surface science, with an emphasis on the common area between solid state physics and physical chemistry. The contributions deal with the following subjects: structure of surfaces, surface science and catalysis, two-dimensional physics and phase transitions, scanning tunneling microscopy, surface scattering and surface dynamics, chemical reactions at surfaces, solid-solid interfaces and superlattices, and surface studies with synchrotron radiation. On each of these subjects an introductory review talk and a number of short research contributions are followed by extensive discussions, which appear in full in the text. This nineteenth Solvay Conference commemorates the 75th anniversary of the Solvay Institutes.
Download or read book Electrochemistry in Mineral and Metal Processing 8 EMMP 8 written by Fiona M. Doyle and published by The Electrochemical Society. This book was released on 2010-04 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions contains papers on electrochemical aspects of concentrating and extracting base, precious and light metals from their ores and secondary materials, and associated energy and environmental considerations. Both fundamental and applied work is covered with emphasis on recent progress in: (1) mineral flotation, (2) hydrometallurgy, (3) electrowinning and refining, (4) environmental technologies associated with mineral and metal processing, (5) electrochemical methods for secondary metal production, and (6) recovery of metals from wastes.
Download or read book Air Force Research Resum s written by and published by . This book was released on with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Semiconductors written by and published by Academic Press. This book was released on 2013-05-18 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. Originally widely known as the "Willardson and Beer" Series, it has succeeded in publishing numerous landmark volumes and chapters. The series publishes timely, highly relevant volumes intended for long-term impact and reflecting the truly interdisciplinary nature of the field. The volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry. - Written and edited by internationally renowned experts - Relevant to a wide readership: physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry
Download or read book CVD of Compound Semiconductors written by Anthony C. Jones and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical growth methods of electronic materials are the keystone of microelectronic device processing. This book discusses the applications of metalorganic chemistry for the vapor phase deposition of compound semiconductors. Vapor phase methods used for semiconductor deposition and the materials properties that make the organometallic precursors useful in the electronics industry are discussed for a variety of materials. Topics included: * techniques for compound semiconductor growth * metalorganic precursors for III-V MOVPE * metalorganic precursors for II-VI MOVPE * single-source precursors * chemical beam epitaxy * atomic layer epitaxy Several useful appendixes and a critically selected, up-to-date list of references round off this practical handbook for materials scientists, solid-state and organometallic chemists, and engineers.
Download or read book Research in Progress written by and published by . This book was released on 1978 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Science Reports written by and published by . This book was released on 1988 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Properties of Solids written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1963 the Research Materials Information Center has been answering inquiries on the availability, preparation, and properties of ultrapure inorganic research specimens. It has been possible to do this with reasonable efficiency by searching an automated coded microfilm collection of the report and open literature and of data sheets and question naires provided by commercial and research producers of pure materials. With the growth of the collection to over 70,000 documents and the increase in the demand for more general background information, it has been necessary to compile bibliographies on an increasing variety of subjects. These have been used as indexes to the microfilmed documents for more efficient searching, and in the past distributed in response to individual requests. However, their size and number no longer permit so casual and uneconomic a method of distribution. The "ORNL Solid State Physics Literature Guides" is a practical alternative. Organization The subject organization of the bibliography is given by the Table of Contents. Each section is preceded by a collection of reviews, bibliographies, and "general" papers (i.e., those dealing with methods or equipment rather than single materials, or with such a wide variety of materials that no subsection was appropriate). Coverage is generally from 1960 to mid-1970. Emphasis is on inorganic materials.
Download or read book The Chemical Physics of Solid Surfaces and Heterogeneous Catalysis written by D.A. King and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Properties of Electronic Materials is the fifth volume of the series, The Chemical Physics of Solid Surfaces and Heterogeneous Catalysis. This volume indicates the present state of some basic properties of semiconductor surfaces. Chapter one summarizes the general problems in electronic materials and the areas affected by the surface science methods. The next two chapters illustrate the existing perception of the electronic and structural properties of elemental and compound semiconductor surfaces. This volume also deals with the properties of adsorption of semiconductors relating to both relevant gas phase species and metals. Chapters four to six of this volume explore compound semiconductors and elemental semiconductors. The remaining chapters of this volume explore the adsorption of metals on elemental semiconductors; aspects of growth kinetics and dynamics involved in molecular beam epitaxy; molecular beam epitaxy of silicon; insulators; and metastable phases. The last chapter covers the surface chemistry of dry etching processes.
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book Materials for Optoelectronic Devices OEICs and Photonics written by H. Schlötterer and published by Elsevier. This book was released on 1991-10-08 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the contributions in this volume is to give a current overview on the basic properties and applications of semiconductor and nonlinear optical materials for optoelectronics and integrated optics. They provide a cross-linkage between different materials (III-V, II-VI, Si-Ge, glasses, etc.), various sample dimensions (from bulk crystals to quantum dots), and a range of techniques for growth (LPE to MOMBE) and for processing (from surface passivation to ion beams). Major growth techniques and materials are discussed, including the sophisticated technologies required to exploit the exciting properties of low dimensional semiconductors. These proceedings will prove an invaluable guide to the current state of optoelectronic and nonlinear optical materials development, as well as indicating trends and also future markets for optoelectronic devices.
Download or read book Semiconductor Research written by Amalia Patane and published by Springer Science & Business Media. This book was released on 2012-04-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the fundamentals, latest developments and use of key experimental techniques for semiconductor research. It explains the application potential of various analytical methods and discusses the opportunities to apply particular analytical techniques to study novel semiconductor compounds, such as dilute nitride alloys. The emphasis is on the technique rather than on the particular system studied.
Download or read book Materials Science and Technology Strained Layer Superlattices written by and published by Academic Press. This book was released on 1991-02-20 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following blurb to be used for the AP Report and ATI only as both volumes will not appear together there.****Strained-layer superlattices have been developed as an important new form of semiconducting material with applications in integrated electro-optics and electronics. Edited by a pioneer in the field, Thomas Pearsall, this volume offers a comprehensive discussion of strained-layer superlattices and focuses on fabrication technology and applications of the material. This volume combines with Volume 32, Strained-Layer Superlattices: Physics, in this series to cover a broad spectrum of topics, including molecular beam epitaxy, quantum wells and superlattices, strain-effects in semiconductors, optical and electrical properties of semiconductors, and semiconductor devices.****The following previously approved blurb is to be used in all other direct mail and advertising as both volumes will be promoted together.****Strained-layer superlattices have been developed as an important new form of semiconducting material with applications in integrated electro-optics and electronics. Edited by a pioneer in the field, Thomas Pearsall, this two-volume survey offers a comprehensive discussion of the physics of strained-layer superlattices (Volume 32), as well as detailing fabrication technology and applications of the material (Volume 33). Although each volume is edited to stand alone, the two books combine to cover a broad spectrum of topics, including molecular beam epitaxy, quantum wells and superlattices, strain-effects in semiconductors, optical and electrical properties of semiconductors, and semiconductor devices.
