Download or read book Low Cost Sensors and Biological Signals written by Frédéric Dierick and published by MDPI. This book was released on 2021-05-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many sensors are currently available at prices lower than USD 100 and cover a wide range of biological signals: motion, muscle activity, heart rate, etc. Such low-cost sensors have metrological features allowing them to be used in everyday life and clinical applications, where gold-standard material is both too expensive and time-consuming to be used. The selected papers present current applications of low-cost sensors in domains such as physiotherapy, rehabilitation, and affective technologies. The results cover various aspects of low-cost sensor technology from hardware design to software optimization.

Download or read book Low Cost Sensors and Biological Signals written by Frédéric Dierick and published by . This book was released on 2021 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many sensors are currently available at prices lower than USD 100 and cover a wide range of biological signals: motion, muscle activity, heart rate, etc. Such low-cost sensors have metrological features allowing them to be used in everyday life and clinical applications, where gold-standard material is both too expensive and time-consuming to be used. The selected papers present current applications of low-cost sensors in domains such as physiotherapy, rehabilitation, and affective technologies. The results cover various aspects of low-cost sensor technology from hardware design to software optimization.

Download or read book Biomedical Signals and Sensors I written by Eugenijus Kaniusas and published by Springer Science & Business Media. This book was released on 2012-04-12 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set focuses on the interface between physiologic mechanisms and diagnostic human engineering. Today numerous biomedical sensors are commonplace in clinical practice. The registered biosignals reflect mostly vital physiologic phenomena. In order to adequately apply biomedical sensors and reasonably interpret the corresponding biosignals, a proper understanding of the involved physiologic phenomena, their influence on the registered biosignals, and the technology behind the sensors is necessary. The first volume is devoted to the interface between physiologic mechanisms and arising biosignals, whereas the second volume is focussed on the interface between biosignals and biomedical sensors. The physiologic mechanisms behind the biosignals are described from the basic cellular level up to their advanced mutual coordination level during sleep. The arising biosignals are discussed within the scope of vital physiologic phenomena to foster their understanding and comprehensive analysis.

Download or read book Biomedical Signals and Sensors II written by Eugenijus Kaniusas and published by Springer. This book was released on 2015-03-03 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book set develops a bridge between physiologic mechanisms and diagnostic human engineering. While the first volume is focused on the interface between physiologic mechanisms and the resultant biosignals, this second volume is devoted to the interface between biosignals and biomedical sensors. That is, in the first volume, the physiologic mechanisms determining biosignals are described from the basic cellular level up to their advanced mutual coordination level. This second volume, considers the genesis of acoustic and optic biosignals and the associated sensing technology from a strategic point of view. As a novelty, this book discusses heterogeneous biosignals within a common frame. This frame comprises both the biosignal formation path from the biosignal source at the physiological level to biosignal propagation in the body, and the biosignal sensing path from the biosignal transmission in the sensor applied on the body up to its conversion to a, usually electric, signal. Some biosignals arise in the course of the body’s vital functions while others map these functions that convey physiological data to an observer. It is highly instructive how sound and light beams interact with biological tissues, yielding acoustic and optic biosignals, respectively. Discussed phenomena teach a lot about the physics of sound and physics of light (as engineering sciences), and, on the other hand, biology and physiology (as live sciences). The highly interdisciplinary nature of biosignals and biomedical sensors is obviously a challenge. However, it is a rewarding challenge after it has been coped with in a strategic way, as offered here. The book is intended to have the presence to answer intriguing “Aha!” questions.

Download or read book Biomedical Signals and Sensors III written by Eugenijus Kaniusas and published by Springer. This book was released on 2019-08-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the third volume in the author’s series on “Biomedical Signals and Sensors,” this book explains in a highly instructive way how electric, magnetic and electromagnetic fields propagate and interact with biological tissues. The series provides a bridge between physiological mechanisms and theranostic human engineering. The first volume focuses on the interface between physiological mechanisms and the resultant biosignals that are commonplace in clinical practice. The physiologic mechanisms determining biosignals are described from the cellular level up to the mutual coordination at the organ level. In turn, the second volume considers the genesis of acoustic and optic biosignals and the associated sensing technology from a strategic point of view. This third volume addresses the interface between electric biosignals and biomedical sensors. Electric biosignals are considered, starting with the biosignal formation path to biosignal propagation in the body and finally to the biosignal sensing path and the recording of the signal. The series also emphasizes the common features of acoustic, optic and electric biosignals, which are ostensibly entirely different in terms of their physical nature. Readers will learn how these electric, magnetic and electromagnetic fields propagate and interact with biological tissues, are influenced by inhomogeneity effects, cause neuromuscular stimulation and thermal effects, and finally pass the electrode/tissue boundary to be recorded. As such, the book helps them manage the challenges posed by the highly interdisciplinary nature of biosignals and biomedical sensors by presenting the basics of electrical engineering, physics, biology and physiology that are needed to understand the relevant phenomena.

Download or read book Biomedical Signals and Sensors II written by Eugenijus Kaniusas and published by Springer. This book was released on 2016-10-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book set develops a bridge between physiologic mechanisms and diagnostic human engineering. While the first volume is focused on the interface between physiologic mechanisms and the resultant biosignals, this second volume is devoted to the interface between biosignals and biomedical sensors. That is, in the first volume, the physiologic mechanisms determining biosignals are described from the basic cellular level up to their advanced mutual coordination level. This second volume, considers the genesis of acoustic and optic biosignals and the associated sensing technology from a strategic point of view. As a novelty, this book discusses heterogeneous biosignals within a common frame. This frame comprises both the biosignal formation path from the biosignal source at the physiological level to biosignal propagation in the body, and the biosignal sensing path from the biosignal transmission in the sensor applied on the body up to its conversion to a, usually electric, signal. Some biosignals arise in the course of the body’s vital functions while others map these functions that convey physiological data to an observer. It is highly instructive how sound and light beams interact with biological tissues, yielding acoustic and optic biosignals, respectively. Discussed phenomena teach a lot about the physics of sound and physics of light (as engineering sciences), and, on the other hand, biology and physiology (as live sciences). The highly interdisciplinary nature of biosignals and biomedical sensors is obviously a challenge. However, it is a rewarding challenge after it has been coped with in a strategic way, as offered here. The book is intended to have the presence to answer intriguing “Aha!” questions.

Download or read book Sensors and Sensing in Biology and Engineering written by Friedrich G. Barth and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological sensors are usually remarkably small, sensitive and efficient. It is highly desirable to design corresponding artificial sensors for scientific, industrial and commercial purposes. This book is designed to fill an urgent need for interdisciplinary exchange between biologists studying sensors in the natural world and engineers and physical scientists developing artificial sensors. The main topics cover mechanical sensors, e.g. waves and sounds, visual sensors and vision and chemosensors. Readers will obtain a fuller understanding of the nature and performance of natural sensors as well as enhanced appreciation for the current status and the potential applicability of artificial microsensors.

Download or read book Acoustic Sensors for Biomedical Applications written by Nilanjan Dey and published by Springer. This book was released on 2018-07-20 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, application-related studies for acoustic biomedical sensors are covered in depth. The book features an array of different biomedical signals, including acoustic biomedical signals as well as the thermal biomedical signals, magnetic biomedical signals, and optical biomedical signals to support healthcare. It employs signal processing approaches, such as filtering, Fourier transform, spectral estimation, and wavelet transform. The book presents applications of acoustic biomedical sensors and bio-signal processing for prediction, detection, and monitoring of some diseases from the phonocardiogram (PCG) signal analysis. Several challenges and future perspectives related to the acoustic sensors applications are highlighted. This book supports the engineers, researchers, designers, and physicians in several interdisciplinary domains that support healthcare.

Download or read book Sensor Systems for Biological Agent Attacks written by National Research Council and published by National Academies Press. This book was released on 2005-12-11 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last ten years, there has been growing concern about potential biological attacks on the nation's population and its military facilities. It is now possible to detect such attacks quickly enough to permit treatment of potential victims prior to the onset of symptoms. The capability to "detect to warn", that is in time to take action to minimize human exposure, however, is still lacking. To help achieve such a capability, the Defense Threat Reduction Agency (DTRA) asked the National Research Council (NRC) to assess the development path for "detect to warn" sensors systems. This report presents the results of this assessment including analysis of scenarios for protecting facilities, sensor requirements, and detection technologies and systems. Findings and recommendations are provided for the most probable path to achieve a detect-to-warn capability and potential technological breakthroughs that could accelerate its attainment.

Download or read book Sensors for Chemical and Biological Applications written by Manoj Kumar Ram and published by CRC Press. This book was released on 2018-10-03 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, sensor research has undergone a quiet revolution that will have a significant impact on a broad range of applications in areas such as health care, the environment, energy, food safety, national security, and manufacturing. Sensors for Chemical and Biological Applications discusses in detail the potential of chemical and biological sensors and examines how they are meeting the challenges of chem-bio terrorism by monitoring through enhanced specificity, fast response times, and the ability to determine multiple hazardous substances. Exploring the nanotechnology approach, and carrying this theme throughout the book, the chapters cover the sensing principles for, chemical, electrical, chromatographic, magnetic, biological, fluidic, optical, and ultrasonic and mass sensing systems. They address issues associated with cost, synthesis, and testing of new low cost materials with high sensitivity, selectivity, robustness, and speed for defined sensor applications. The book extensively discusses the detailed analysis of future impact of chemical and biological sensors in day-to-day life. Successful development of improved chemical sensor and biosensor systems and manufacturing procedures will not only increase the breadth and depth of the sensor industry, but will spill over into the design and manufacture of other types of sensors and devices that use nanofabrication and microfabrication techniques. This reference not only supplies versatile, hands-on tools useful in a broad array of disciplines, but also lays the interdisciplinary groundwork required for the achievement of sentient processing.

Download or read book Multifaceted Bio sensing Technology written by Lakhveer Singh and published by Academic Press. This book was released on 2022-11-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multifaceted Bio-sensing Technology introduces the different types of biosensors, their construction materials, configurations, production methods, and their uses in bioelectrochemical fuel cells (BEFC). It focuses on recent progress in the production of biosensing platforms/interfaces, their integration, design and fabrication, and their multifaceted applications in bioelectrochemical systems. The chapters explore the integration of genetic elements such as DNA, enzymes, and whole cells within these systems, and address environmental applications including wastewater contaminant detection, toxicity, and bioremediation. Throughout, the book shows how rapid, minuscule, and affordable biocomponents can be produced for a variety of energy and environmental applications. This book provides a practical introduction to the production of biocomponents for bioelectrochemical devices and environmental monitoring, and will be a useful reference for graduates and researchers involved in the application of bioelectrochemical systems, as well as those working more broadly in bioenergy, electrochemistry, biology, environmental engineering, and multidisciplinary research across those areas. Examines the applications of biosensors in bioelectrochemical fuel cells and other fields and their integration and assembly for future uses Explores on the application of carbon nanomaterials in biosensors Presents detailed schematics and calculations that outline integrations in bioelectrochemical systems

Download or read book Biological and Medical Sensor Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological and Medical Sensor Technologies presents contributions from top experts who explore the development and implementation of sensors for various applications used in medicine and biology. Edited by a pioneer in the area of advanced semiconductor materials, the book is divided into two sections. The first part covers sensors for biological applications. Topics include: Advanced sensing and communication in the biological world DNA-derivative architectures for long-wavelength bio-sensing Label-free silicon photonics Quartz crystal microbalance-based biosensors Lab-on-chip technologies for cell-sensing applications Enzyme biosensors Future directions for breath sensors Solid-state gas sensors for clinical diagnosis The second part of the book deals with sensors for medical applications. This section addresses: Bio-sensing and human behavior measurements Sweat rate wearable sensors Various aspects of medical imaging The future of medical imaging Spatial and spectral resolution aspects of semiconductor detectors in medical imaging CMOS SSPM detectors CdTe detectors and their applications to gamma-ray imaging Positron emission tomography (PET) Composed of contributions from some of the world’s foremost experts in their respective fields, this book covers a wide range of subjects. It explores everything from sensors and communication systems found in nature to the latest advances in manmade sensors. The end result is a useful collection of stimulating insights into the many exciting applications of sensor technologies in everyday life.

Download or read book Semiconducting Polymer Materials for Biosensing Applications written by Kuan Yew Cheong and published by Elsevier. This book was released on 2024-01-26 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconducting Polymer Materials for Biosensing Applications provides a comprehensive look at semiconducting polymer materials and their deposition, characterization and use in biosensors. The book begins with an introduction to the key materials and background of essential technologies. Major types of monomer chemistries and fabrication of polymer materials are discussed, with a focus on semiconducting films suitable for use in (bio)sensors. A survey of the state-of-the-art for organic thin-film polymer semiconductor sensor-based fabrication methods for materials and devices covers a wide range of chemical, material, physical and advanced fabrication techniques. The book concludes with a chapter on theoretical insights for designing sensors, (bio)sensors for medical, food and environmental applications and the future of sensors. This book is suitable for materials scientists and engineers and biomedical engineers in academia or industry. Reviews the most promising semiconductor polymer materials, such as conjugated polymers most frequently used in biosensing applications Provides an overview of the electrochemical techniques to process semiconductor polymer materials Discusses the use of semiconductor polymer-based biosensors in biomedical, environmental, chemical and aerospace applications

Download or read book Graphene for Flexible Lighting and Displays written by Tae Woo Lee and published by Woodhead Publishing. This book was released on 2019-11-16 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene for Next Generation Lighting and Displays provides readers with a comprehensive overview of graphene, flexible graphene electrodes, and graphene-based next-generation display and lighting. The book covers a wide range of information, including the basic physics of graphene and recent trends in technical developments for graphene-based flexible and stretchable light-emitting devices. In addition, it discusses future prospects and suggests further directions for research on graphene-based next-generation displays and lightings. In addition, the book includes sections on the fundamental properties of graphene, synthetic methods of graphene, preparation of graphene electrodes and composite electrodes, and doping methods for graphene electrodes. Potential applications are also addressed including graphene-based flexible electrodes, buffer layer, emitters, and graphene-based stretchable electrodes. Reviews the most promising applications, including OLEDs, graphene-based buffer layers for LEDs, quantum dot emitters, and stretchable graphene electrodes Describes practical approaches in modifying the properties of graphene for the purpose of optoelectronic applications

Download or read book Sensors written by Bruno Andò and published by Springer. This book was released on 2017-09-07 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best papers presented at the Third Italian National Conference on Sensors, held in Rome, Italy, from 23 to 25 February 2016. The book represents an invaluable and up-to-the-minute tool, providing an essential overview of recent findings, strategies and new directions in the area of sensor research. Further, it addresses various aspects based on the development of new chemical, physical or biological sensors, assembling and characterization, signal treatment and data handling. Lastly, the book applies electrochemical, optical and other detection strategies to relevant issues in the food and clinical environmental areas, as well as industry-oriented applications.

Download or read book Artificial Intelligence for Sustainable Energy written by Jimson Mathew and published by Springer Nature. This book was released on with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanomaterials Based Sensors written by Jamballi G. Manjunatha and published by Elsevier. This book was released on 2022-04-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials-Based Sensors: Emerging Research Trends in Devices and Applications covers the most recent research and design trends for carbon nanomaterials-based sensors for a variety of applications, including clinical and environmental uses, and more. Carbon nanomaterials-based sensors can be used with high sensitivity, stability and accuracy compared to other techniques. Written by experts in their given fields from around the world, this book helps researchers solve the particular challenges they face when developing new types of sensors. It instructs how to make sensitive, selective, robust, fast-response and stable carbon nanomaterial-based sensors, as well as how to utilize them in real life. Covers the environmental monitoring and analytical implications of electro-analytical methods, one of the most dynamically developing branches of carbon nanomaterials Includes a complete discussion of functionalized nanostructure materials reformulated with noble materials and advanced characteristics for improved applications when compared to standard materials Covers sustainability and challenges in the commercialization of carbon nanomaterials-based sensors