Download or read book Localized Corrosion of Type 304 Stainless Steel in Simulated Swimming Pool Water written by Tiangan Lian and published by . This book was released on 1995 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Observations of the Intergranular Corrosion of Irradiated Type 304 Stainless Steel written by E. L. Long (Jr.) and published by . This book was released on 1964 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General and Localized Corrosion of Austenitic And Borated Stainless Steels in Simulated Concentrated Ground Waters written by L. L. Wong and published by . This book was released on 2004 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boron containing stainless steels are used in the nuclear industry for applications such as spent fuel storage, control rods and shielding. It was of interest to compare the corrosion resistance of three borated stainless steels with standard austenitic alloy materials such as type 304 and 316 stainless steels. Tests were conducted in three simulated concentrated ground waters at 90 C. Results show that the borated stainless were less resistant to corrosion than the witness austenitic materials. An acidic concentrated ground water was more aggressive than an alkaline concentrated ground water.
Download or read book The Effect of Exposed Nonmetallic Inclusions on Corrosion Resistance of Type 304 Stainless Steel in a Simulated Pressurized Water Reactor Environment written by F. F LYLE (JR.) and published by . This book was released on with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localized Corrosion written by Fumio Hine and published by . This book was released on 1988 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Stress Corrosion Cracking of Type 304 Stainless Steel and Carbon Steel in Simulated Boiling Water Reactor written by Ho Jin Choi and published by . This book was released on 1981 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The effect of decontamination cycle on stress corrosion cracking of type 304 stainless steel in BWR simulated high temperature water written by and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localized Weld Metal Corrosion in Stainless Steel Water Tanks written by and published by . This book was released on 1995 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly developed leaks within the TFC and TFD tanks (LLNL groundwater treatment facilities) were caused by localized corrosion within the resolidified weld metal. The corrosion was initiated by the severe oxidation of the backsides of the welds which left the exposed surfaces in a condition highly susceptible to aqueous corrosion. The propagation of surface corrosion through the thickness of the welds occurred by localized corrosive attack. This localized attack was promoted by the presence of shielded aqueous environments provided by crevices at the root of the partial penetration welds. In addition to rapid corrosion of oxidized surfaces, calcium carbonate precipitation provided an additional source of physical shielding from the bulk tank environment. Qualification testing of alternate weld procedures showed that corrosion damage can be prevented in 304L stainless steel GTA welds by welding from both sides while preventing oxidation of the tank interior through the use of an inert backing gas such as argon. Corrosion resistance was also satisfactory in GMA welds in which oxidized surfaces were postweld cleaned by wire brushing and chemically passivated in nitric acid. Further improvements in corrosion resistance are expected from a Mo-containing grade of stainless steel such as type 316L, although test results were similar for type 304L sheet welded with type 308L filler metal and type 316L sheet welded with type 316L filler metal.
Download or read book Assessment of Susceptibility of Type 304 Stainless Steel to Intergranular Stress Corrosion Cracking in Simulated Savannah River Reactor Environments written by and published by . This book was released on 1989 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intergranular stress corrosion cracking (IGSCC) of Type 304 stainless steel rate tests (CERT) of specimens machined was evaluated by constant extension from Savannah River Plant (SRP) decontaminated process water piping. Results from 12 preliminary CERT tests verified that IGSCC occurred over a wide range of simulated SRP envirorments. 73 specimens were tested in two statistical experimental designs of the central composite class. In one design, testing was done in environments containing hydrogen peroxide; in the other design, hydrogen peroxide was omitted but oxygen was added to the environment. Prediction equations relating IGSCC to temperature and environmental variables were formulated. Temperature was the most important independent variable. IGSCC was severe at 100 to 120C and a threshold temperature between 40C and 55C was identified below which IGSCC did not occur. In environments containing hydrogen peroxide, as in SRP operation, a reduction in chloride concentration from 30 to 2 ppB also significantly reduced IGSCC. Reduction in sulfate concentration from 50 to 7 ppB was effective in reducing IGSCC provided the chloride concentration was 30 ppB or less and temperature was 95C or higher. Presence of hydrogen peroxide in the environment increased IGSCC except when chloride concentration was 11 ppB or less. Actual concentrations of hydrogen peroxide, oxygen and carbon dioxide did not affect IGSCC. Large positive ECP values (+450 to +750 mV Standard Hydrogen Electrode (SHE)) in simulated SRP environments containing hydrogen peroxide and were good agreement with ECP measurements made in SRP reactors, indicating that the simulated environments are representative of SRP reactor environments. Overall CERT results suggest that the most effective method to reduce IGSCC is to reduce chloride and sulfate concentrations.
Download or read book Stress Corrosion Crack Growth Rates in Type 304 Stainless Steel in Simulated BWR Environments written by J. Y. Park and published by . This book was released on 1984 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1968 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Materials Science for Environmental and Energy Technologies VI written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2018-02-07 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent one-volume resource for understanding the most important current issues in the research and advances in materials science for environmental and energy technologies This proceedings volume contains a collection of 20 papers from the 2016 Materials Science and Technology (MS&T'16) meeting held in Salt Lake City, UT, from October 24-27 of that year. These conference symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites. Topics covered include: the 8th International Symposium on Green and Sustainable Technologies for Materials Manufacturing Processing; Materials Issues in Nuclear Waste Management in the 21st Century; Construction and Building Materials for a Better Environment; Materials for Nuclear Applications and Extreme Environments; Nanotechnology for Energy, Healthcare, and Industry; and Materials for Processes for CO2 Capture, Conversion and Sequestration. Logically organized and carefully selected articles give insight into advances in materials science for environmental and energy technologies. Incorporates the latest developments related to advances in materials science for environmental and energy technologies Advances in Materials Science for Environmental and Energy Technologies VI: Ceramic Transactions Volume 262 is ideal for academics in mechanical and chemical engineering, materials and or ceramics, chemistry departments and for those working in government laboratories.
Download or read book STRESS CORROSION CRACKING AND CORROSION FATIGUE OF SENSITIZED TYPE 304 STAINLESS STEEL IN SIMULATED BWR ENVIRONMENTS written by D. D. Macdonald and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1977 Annual Meeting American Section of the International Solar Energy Society June 6 19 1977 Orlando Florida written by International Solar Energy Society. American Section and published by . This book was released on 1971 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Influence of Non halide Anions in the Localized Corrosion of 304 Stainless Steel written by R. A. Casper and published by . This book was released on 1974 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
