Download or read book Local Approach to Fracture written by Jacques Besson and published by Presses des MINES. This book was released on 2006 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the structural integrity together with the performance (weight, time to failure,...) of structures requires a persisting effort in the field of mechanics of materials and structures. This can be achieved by a better understanding of the relationships between microscopic mechanisms and the macroscopic material behavior and structural response with respect to damage and fracture. This improvement strategy of materials, structures and assement methods can be described as local approach to fracture. The local approach to fracture is an active research field. Initially developped in the context of steel structures (pressure vessels), its application domain has become wider and now deals with various kinds of materials (metallic alloys, metal matrix composites, polymers, elastomers, concrete) as well as various physical deformation and damage mechanisms (plasticity, creep, fatigue, ductile fracture, brittle fracture, ...). This volume contains the proceedings on an international conference dedicated to these issues.
Download or read book Mechanical Behavior of Concrete written by Jean-Michel Torrenti and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of all aspects of the mechanical behavior of concrete, including such features as its elastoplasticity, its compressive and tensile strength, its behavior over time (including creep and shrinkage, cracking and fatigue) as well as modeling techniques and its response to various stimuli. As such, it will be required reading for anyone wishing to increase their knowledge in this area.
Download or read book Proceedings of the ASME Pressure Vessels and Piping Conference 2006 Materials and fabrication written by and published by . This book was released on 2007 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Concrete Structures written by Gunther Meschke and published by CRC Press. This book was released on 2020-11-25 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings brings together the work of researchers and practising engineers concerned with computational modelling of complex concrete, reinforced concrete and prestressed concrete structures in engineering practice. The subjects considered include computational mechanics of concrete and other cementitious materials, including masonry. Advanced discretisation methods and microstructural aspects within multi-field and multi-scale settings are discussed, as well as modelling formulations and constitutive modelling frameworks and novel experimental programmes. The conference also considered the need for reliable, high-quality analysis and design of concrete structures in regard to safety-critical structures, with a view to adopting these in codes of practice or recommendations. The book is of special interest to researchers in computational mechanics, and industry experts in complex nonlinear simulations of concrete structures.
Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites With an Introduction to Fabric Tensors written by George Voyiadjis and published by Elsevier. This book was released on 2010-07-07 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the principles of Damage Mechanics along with the latest research findings. Both isotropic and anisotropic damage mechanisms are presented. Various damage models are presented coupled with elastic and elasto-plastic behavior. The book includes two chapters that are solely dedicated to experimental investigations conducted by the authors. In its last chapter, the book presents experimental data for damage in composite materials that appear in the literature for the first time. · Systematic treatment of damage mechanics in composite materials · Includes special and advanced topics · Includes basic principles of damage mechanics · Includes new experimental data that appears in print for the first time · Covers both metals and metal matrix composite materials · Includes new chapters on fabric tensors · Second edition includes four new chapters
Download or read book Advanced Materials and Structures for Extreme Operating Conditions written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2008-01-23 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the pages of this present monograph readers will find virtually everything they need to know about the latest advanced materials. The authors have covered almost every angle, including composites, functionally graded materials, and materials for high temperature service. They also examine advanced approaches to local and non-local analysis of localized damage, and provide a new description of crack deactivation. This highly informative volume also tackles the material properties for high temperature applications.
Download or read book Micromechanism of Cleavage Fracture of Metals written by Jianhong Chen and published by Butterworth-Heinemann. This book was released on 2014-09-15 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors focus on the description of the physical nature of cleavage fracture to offer scientists, engineers and students a comprehensive physical model which vividly describes the cleavage microcracking processes operating on the local (microscopic) scale ahead of a defect. The descriptions of the critical event and the criteria for cleavage fracture will instruct readers in how to control the cleavage processes and optimize microstructure to improve fracture toughness of metallic materials. Physical (mechanical) processes of cleavage fracture operating on the local (microscopic) scale, with the focus on the crack nucleation and crack propagation across the particle/grain and grain/grain boundaries Critical event, i.e., the stage of greatest difficulty in forming the microcrack, which controls the cleavage fracture Criteria triggering the cleavage microcracking with incorporation of the actions of macroscopic loading environment into the physical model Effects of microstructure on the cleavage fracture, including the effects of grain size, second phase particles and boundary Comprehensive description of the brittle fracture emerging in TiAl alloys and TiNi memory alloys
Download or read book Recent Advances in Applied Mechanics written by Tezeswi Tadepalli and published by Springer Nature. This book was released on 2022-04-04 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the Virtual Seminar on Applied Mechanics 2021 organized by the Indian Society for Applied Mechanics. The contents of this volume focus on solid mechanics, fluid mechanics, biomechanics/biomedical engineering, materials science and design engineering. The authors are experienced practitioners and the chapters encompass up-to-date research in the field of applied mechanics. This book will appeal to researchers and scholars across the broad spectrum of engineering involving the application of mechanics in civil, mechanical, aerospace, automobile, bio-medical, material science, and more.
Download or read book Fatigue Assessment of Welded Joints by Local Approaches written by Dieter Radaj and published by Woodhead Publishing. This book was released on 2006-10-30 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Written by a distinguished team of authors
Download or read book Advances in Numerical Modeling of Adhesive Joints written by Lucas Filipe Martins da Silva and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most recent numerical modeling of adhesive joints. Advances in damage mechanics and extended finite element method are described in the context of the Finite Element method with examples of application. The book also introduces the classical continuum mechanics and fracture mechanics approach and discusses the boundary element method and the finite difference method with indication of the cases they are most adapted to. At the moment there a no numerical technique that can solve any problem and the analyst needs to be aware of the limitations involved in each case.
Download or read book Continuum Damage Mechanics written by Sumio Murakami and published by Springer Science & Business Media. This book was released on 2012-02-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry. This, in turn, has caused more interest in continuum damage mechanics and its engineering applications. This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook. The book consists of two parts and an appendix. Part I is concerned with the foundation of continuum damage mechanics. Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2. In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application to the modeling of the constitutive and the evolution equations of damaged materials are descried as a systematic basis for the subsequent development throughout the book. Part II describes the application of the fundamental theories developed in Part I to typical damage and fracture problems encountered in various fields of the current engineering. Important engineering aspects of elastic-plastic or ductile damage, their damage mechanics modeling and their further refinement are first discussed in Chapter 6. Chapters 7 and 8 are concerned with the modeling of fatigue, creep, creep-fatigue and their engineering application. Damage mechanics modeling of complicated crack closure behavior in elastic-brittle and composite materials are discussed in Chapters 9 and 10. In Chapter 11, applicability of the local approach to fracture by means of damage mechanics and finite element method, and the ensuing mathematical and numerical problems are briefly discussed. A proper understanding of the subject matter requires knowledge of tensor algebra and tensor calculus. At the end of this book, therefore, the foundations of tensor analysis are presented in the Appendix, especially for readers with insufficient mathematical background, but with keen interest in this exciting field of mechanics.
Download or read book Thermomechanical Industrial Processes written by Jean-Michel Bergheau and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of manufacturing processes and of their mechanical consequences is of growing interest in industry. However, such simulations need the modeling of couplings between several physical phenomena such as heat transfer, material transformations and solid or fluid mechanics, as well as to be adapted to numerical methodologies. This book gathers a state of the art on how to simulate industrial processes, what data are needed and what numerical simulation can bring. Assembling processes such as welding and friction stir welding, material removal processes, elaboration processes of composite structures, sintering processes, surface-finishing techniques, and thermo-chemical treatments are investigated. This book is the work of a group of researchers who have been working together in this field for more than 12 years. It should prove useful for both those working in industry and those studying the numerical methods applied to multiphysics problems encountered in manufacturing processes.
Download or read book Mechanical Behaviour of Materials written by Dominique François and published by Springer Science & Business Media. This book was released on 2012-12-24 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. This ought to reflect in the training of students. In this respect, the first volume of this work deals with elastic, elastoplastic, elastoviscoplastic and viscoelastic behaviours; this second volume continues with fracture mechanics and damage, and with contact mechanics, friction and wear. As in Volume I, the treatment links the active mechanisms on the microscopic scale and the laws of macroscopic behaviour. Chapter I is an introduction to the various damage phenomena. Chapter II gives the essential of fracture mechanics. Chapter III is devoted to brittle fracture, chapter IV to ductile fracture and chapter V to the brittle-ductile transition. Chapter VI is a survey of fatigue damage. Chapter VII is devoted to hydrogen embrittlement and to environment assisted cracking, chapter VIII to creep damage. Chapter IX gives results of contact mechanics and a description of friction and wear mechanisms. Finally, chapter X treats damage in non metallic materials: ceramics, glass, concrete, polymers, wood and composites. The volume includes many explanatory diagrams and illustrations. A third volume will include exercises allowing deeper understanding of the subjects treated in the first two volumes.
Download or read book Plasticity written by P.M. Dixit and published by CRC Press. This book was released on 2014-10-23 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the Principles of Plasticity Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications effectively addresses this need. This book fills a void by introducing the basic fundamentals of solid mechanics of deformable bodies. It provides a thorough understanding of plasticity theory, introduces the concepts of plasticity, and discusses relevant applications. Studies the Effects of Forces and Motions on Solids The authors make a point of highlighting the importance of plastic deformation, and also discuss the concepts of elasticity (for a clear understanding of plasticity, the elasticity theory must also be understood). In addition, they present information on updated Lagrangian and Eulerian formulations for the modeling of metal forming and machining. Topics covered include: Stress Strain Constitutive relations Fracture Anisotropy Contact problems Plasticity: Fundamentals and Applications enables students to understand the basic fundamentals of plasticity theory, effectively use commercial finite-element (FE) software, and eventually develop their own code. It also provides suitable reference material for mechanical/civil/aerospace engineers, material processing engineers, applied mechanics researchers, mathematicians, and other industry professionals.
Download or read book Continuum Scale Simulation of Engineering Materials written by Dierk Raabe and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume provides an excellent overview on the different methods, comparing the different methods in terms of their respective particular weaknesses and advantages. This trains readers to identify appropriate approaches to the new challenges that emerge every day in this exciting domain. Divided into three main parts, the first is a basic overview covering fundamental key methods in the field of continuum scale materials simulation. The second one then goes on to look at applications of these methods to the prediction of microstructures, dealing with explicit simulation examples, while the third part discusses example applications in the field of process simulation. By presenting a spectrum of different computational approaches to materials, the book aims to initiate the development of corresponding virtual laboratories in the industry in which these methods are exploited. As such, it addresses graduates and undergraduates, lecturers, materials scientists and engineers, physicists, biologists, chemists, mathematicians, and mechanical engineers.
Download or read book Recent Trends in Fracture and Damage Mechanics written by Geralf Hütter and published by Springer. This book was released on 2015-09-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics in fracture and damage mechanics. It presents historical perspectives as well as recent innovative developments, presented by peer reviewed contributions from internationally acknowledged authors. The volume deals with the modeling of fracture and damage in smart materials, current industrial applications of fracture mechanics, and it explores advances in fracture testing methods. In addition, readers will discover trends in the field of local approach to fracture and approaches using analytical mechanics. Scholars in the fields of materials science, engineering and computational science will value this volume which is dedicated to Meinhard Kuna on the occasion of his 65th birthday in 2015. This book incorporates the proceedings of an international symposium that was organized to honor Meinhard Kuna’s contributions to the field of theoretical and applied fracture and damage mechanics.
Download or read book Continuous and Discontinuous Modelling of Fracture in Concrete Using FEM written by Jacek Tejchman and published by Springer Science & Business Media. This book was released on 2012-07-28 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book analyzes a quasi-static fracture process in concrete and reinforced concrete by means of constitutive models formulated within continuum mechanics. A continuous and discontinuous modelling approach was used. Using a continuous approach, numerical analyses were performed using a finite element method and four different enhanced continuum models: isotropic elasto-plastic, isotropic damage and anisotropic smeared crack one. The models were equipped with a characteristic length of micro-structure by means of a non-local and a second-gradient theory. So they could properly describe the formation of localized zones with a certain thickness and spacing and a related deterministic size effect. Using a discontinuous FE approach, numerical results of cracks using a cohesive crack model and XFEM were presented which were also properly regularized. Finite element analyses were performed with concrete elements under monotonic uniaxial compression, uniaxial tension, bending and shear-extension. Concrete beams under cyclic loading were also simulated using a coupled elasto-plastic-damage approach. Numerical simulations were performed at macro- and meso-level of concrete. A stochastic and deterministic size effect was carefully investigated. In the case of reinforced concrete specimens, FE calculations were carried out with bars, slender and short beams, columns, corbels and tanks. Tensile and shear failure mechanisms were studied. Numerical results were compared with results from corresponding own and known in the scientific literature laboratory and full-scale tests.
