Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-07 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor

Download or read book LLDPE Production via Slurry Process Cost Analysis LLDPE E21A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-hexene using a slurry process. The process examined is similar to Chevron Phillips process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 20120282144, issued to Chevron in 2012; (2) US Patent 7629421, issued to Chevron in 2009 Keywords: Ethene, PE, Isobutane, Slurry Reactor, Loop Reactor

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals Advanced SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): US Patent 6319996, issued to Nova Chemical in 2001 Keywords: Ethene, PE, Methylpentane, Stirred-Reactor, Dual-Reactor

Download or read book LLDPE Production via Gas Phase Process Cost Analysis LLDPE E31A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL and INEOS Innovene G processes. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015; (2) US Patent 20030171512, issued to Univation in 2003 Keywords: Ethene, PE, Gas Reactor, Copolymer

Download or read book LLDPE Production via Gas Phase Process Cost Analysis LLDPE E22A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-hexene using a gas phase process. The process examined is similar to Univation UNIPOL and INEOS Innovene G processes. This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015 (2) US Patent 20030171512, issued to Univation in 2003 Keywords: Ethene, PE, Gas Reactor, Copolymer

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E13A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to Dow DOWLEX process. This report was developed based essentially on the following reference(s): US Patent 6420516, issued to Dow in 2002 Keywords: Ethene, PE, Copolymer

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E33A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-butene using a solution process. The process examined is similar to NOVA Sclairtech process. This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, PE, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor, Copolymer

Download or read book Linear Alpha Olefins from Ethylene Cost Analysis LAO E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Alpha Olefins (LAO) production from ethylene. The process examined is similar to Shell Higher Olefins Process (SHOP). In this process, ethylene is oligomerized to produce Linear Alpha Olefins ranging from C4 to C20. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Olefins, Higher", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Ethene, Ethylene Oligomerization, Internal Olefins

Download or read book HDPE Production via Slurry Process Cost Analysis HDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry process. The process examined is similar to LyondellBasell Hostalen process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): LyondellBasell, "Licensed Polyolefin Technologies and Services - Hostalen" Keywords: Ethene, Bimodal, Multimodal, CSTR, Advanced Cascade Process, ACP, Butylene

Download or read book LLDPE Production via Gas Phase Process Cost Analysis LLDPE E32A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to LyondellBasell Spherilene S process. This report was developed based essentially on the following reference(s): (1) US Patent 9458259, issued to Basell in 2016 (2) WO Patent 2006082007, issued to Basell in 2006 Keywords: Ethene, PE, Gas Reactor, Copolymer

Download or read book LDPE via High Pressure Tubular Process Cost Analysis LDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Low Density Polyethylene (LDPE) production from polymer grade (PG) ethylene. The process examined is a typical high-pressure tubular polymerization process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 6899852, issued to ExxonMobil in 2005; (2) US Patent 20130333832, issued to LyondellBasell in 2013 Keywords: Ethene, PE, BASF, Tubular Reactor, ExxonMobil, LyondellBasell, Lupotech

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA) The process examined is a typical melt-phase polymerization followed by solid-state polymerization. In this process, initially an oligomer intermediate is produced by the esterification of PTA with ethylene glycol. The oligomer then undergoes a melt-polymerization and a solid-state polymerization, leading to a bottle grade PET. This report was developed based essentially on the following reference(s): (1) "Polyesters, Thermoplastic", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) "Polyesters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015; (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG

Download or read book Polylactic Acid Production Cost Analysis PLA E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polylactic Acid (PLA) production from lactic acid using a melt-phase polymerization process. The process examined is similar to a process developed by Natureworks, in which poly(lactic acid) is produced from a 88 wt% lactic acid solution in water via the ring opening polymerization chemical pathway. In this process lactic acid is first oligomerized and then depolymerized into lactide, a cyclic dimer of lactic acid, which is then polymerized to yield Poly(lactic acid). This report was developed based essentially on the following reference(s): (1) US Patent 8674056, issued to NatureWorks in 2014 (2) EP Patent 1247808, issued to Cargill in 2003 Keywords: Lactide, 2-Hydroxypropanoic Acid, Dow, Biodegradable Polymer

Download or read book Ethylene Vinyl Acetate Production Process Cost Analysis EVA E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Vinyl Acetate (EVA) production from ethylene and vinyl acetate. The process examined is a typical high-pressure tubular polymerization processes. The final product obtained is Ethylene Vinyl Acetate (EVA) copolymer with a vinyl acetate content of 20 wt%. This report was developed based essentially on the following reference(s): (1) US Patent 6899852, issued to ExxonMobil in 2005 (2) US Patent 20130333832, issued to LyondellBasell in 2013 Keywords: Ethene, EVA, BASF, Tubular Reactor, ExxonMobil, LyondellBasell, Lupotech

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.