Download or read book Literature Review on the Design of Composite Mechanically Fastened Joints written by C. Poon and published by National Research Council Canada. This book was released on 1986 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a literature review of the state-of-the-art analyticaland experimental methodologies adopted in the aerospace indestry for thedesign of mechanically fastened joints in composite structures. Results andconclusions obtained from the published literature relating to the effectsof critical parameters, which include composite material system, fastenerconfiguration and joint geometry, on the mechanical behaviour and failuremodes of composite mechanically fastened joints are discussed. Furtherresearch required to improve the design of composite mechanically fastenedjoints is identified as a result of this review.
Download or read book Aeronautical Note written by and published by . This book was released on 1985 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimental Investigation of Skin Friction on Smooth Surfaces Supporting Air Bearing Channels written by B. H. K. Lee and published by . This book was released on 1986 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1986-10 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Daniel Gay and published by CRC Press. This book was released on 2007-04-25 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for a single reference source on the design and applications of composites, Composite Materials: Design and Applications, Second Edition provides an authoritative examination of the composite materials used in current industrial applications and delivers much needed practical guidance to those working in this rapidly d
Download or read book Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Grigore Gogu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the integration and the optimization of product design and manufacturing systems. The book is divided into 3 chapters corresponding to the following three main topics : - optimization of product design process (mechanical design process, mass customization, modeling the product representation, computer support for engineering design, support systems for tolerancing, simulation and optimization tools for structures and for mechanisms and robots), -optimization of manufacturing systems (multi-criteria optimization and fuzzy volumes, tooth path generation, machine-tools behavior, surface integrity and precision, process simulation), - methodological aspects of integrated design and manufacturing (solid modeling, collaborative tools and knowledge formalization, integrating product and process design and innovation, robust and reliable design, multi-agent approach in VR environment). The present book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.
Download or read book Terra 2008 written by Leslie Rainer and published by Getty Publications. This book was released on 2011-06-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.
Download or read book Integrated Design and Manufacturing in Mechanical Engineering written by Patrick Chedmail and published by Springer. This book was released on 2012-11-05 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the selected papers of the first I.D.M.M.E. conference on 'Integrated Design and Manufacturing in Mechanical Engineering', held in Nantes from 15-17 April 1996. Its objective was to discuss the questions related to the definition of the optimal design and manufacturing processes and to their integration through coherent methodologies in adapted environments. The initiative of the Conference and the organization thereof, is mainly due to the efforts of the french PRIMECA group (Pool of Computer Resources for Mechanics) started eight years ago. We were able to attract the internationru community with the support of the International Institution for Production Engineering Research (C.I.R.P.). The conference brought together two hundred and fifty specialists from around the world. About ninety papers and twenty posters were presented covering three main topics : optimization and evaluation of the product design process, optimization and evaluation of the manufacturing systems and methodological aspects.
Download or read book Railway Management and Engineering written by V Profillidis and published by Routledge. This book was released on 2017-11-30 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a rapidly changing world, with increasing competition in all sectors of transportation, railways are in a period of restructuring their management and technology. New methods of organization are introduced, commercial and tariff policies change radically, a more entrepreneurial spirit is required. At the same time, new high-speed tracks are being constructed and old tracks are renewed, high-comfort rolling stock vehicles are being introduced, logistics and combined transport are being developed. Awareness of environmental issues and search for greater safety give to the railways a new role within the transportation system. Meanwhile, methods of analysis have significantly evolved, principally due to computer applications and new ways of thinking and approaching old problems. Therefore it becomes necessary to come up with a new scientific approach to tackle management and engineering aspects of railways, to understand in-depth the origins and inter-relationships of the various situations and phenomena and to suggest the appropriate methods and solutions to solve the various emerging problems. This book aims to cover the need for a new scientific approach for railways. It is written for railway managers, economists and engineers, consulting economists and engineers, students of schools of engineering, transportation and management. The book is divided into three distinct parts: Part A deals with the management of railways, Part B deals with the track and, Part C deals with rolling stock and environmental topics. Each chapter of the book contains the necessary theoretical analysis of the phenomena studied, the recommended solutions, applications, charts and design of the specific railway component. In this way, both the requirement for a theoretical analysis is met, and the need of the railway manager and engineer for tables, nomographs, regulations, etc. is satisfied. Railways in Europe have separated activities of infrastructure from those of operation. In other parts of the world, however, railways remain unified. The book addresses both situation. Railways present great differences in their technologies. Something may be valid for one such technology, but not for another. To overcome this problem, regulations of the International Union of Railways (UIC) as well as European Standardization (CEN) have been used to the greatest extent possible. Whenever a specific technology or method is presented, the limits of its application are clearly emphasized.
Download or read book The Supporting Roots of Trees and Woody Plants Form Function and Physiology written by A. Stokes and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication comprises the proceedings of the first International Conference devoted to the structural roots of trees and woody plants. 'The Supporting Roots - Structure and Function,' 20-24 July 1998, Bordeaux, France. The meeting was held under the auspices ofIUFRO WPS 2. 01. 13 'Root Physiology and Symbiosis,' and its aim was to bring together scientific researchers, foresters and arboriculturalists, to discuss current problems in structural root research and disseminate knowledge to an audience from a wide disciplinary background. For the first time in an international conference, emphasis was placed on presenting recent reseach in the field of tree anchorage mechanics and root biomechanics. The way in which tree stability can be affected by root system symmetry and architecture was addressed, as well as how movement during wind sway can influence the development and shape of woody roots. The role of different nursery and planting techniques was discussed, in relation to effects on root system form and development. Root response to different environmental stresses, including water, temperature, nutrient and mechanical stress was addressed in detail. The structure and function of woody roots was also considered at different levels, from coarse to fine roots, with several papers discussing the interaction between roots and the rhizosphere. One of the conference highlights was the presentation of new methods in root research, by a series of workshops held at LRBB-INRA, Pierroton, on the northern border of the Gascony forest.
Download or read book The Soviet Oil Offensive written by United States. Office of Armed Forces Information and Education and published by . This book was released on 1962 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AGARD Conference Proceedings written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Music in Antiquity written by Joan Goodnick Westenholz and published by Walter de Gruyter. This book was released on 2014-04-02 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Universal Joints and Driveshafts written by Hans-Christoph Seherr-Thoss and published by Springer Science & Business Media. This book was released on 2006-03-28 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major progress has been made in the field of driveshafts since the authors presented their first edition of this unique reference work. Correspondingly, major revisions have been done for second edition of the German Textbook (Springer 2003), which is present here in the English translation. The presentation was adjusted, novel improvements of manufacturing and design are described, and modern aspects of production are incorporated. The design and application of Hooke’s joint driveshafts is discussed as well as constant velocity joints for the construction of agricultural engines, road and rail vehicles. This work can be used as a textbook as well as a reference for practitioners, scientists, and students dealing with drive technology.
Download or read book Structural Conservation of Stone Masonry written by and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterisation of Areal Surface Texture written by Richard Leach and published by Springer Science & Business Media. This book was released on 2013-04-03 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The function of a component part can be profoundly affected by its surface topography. There are many examples in nature of surfaces that have a well-controlled topography to affect their function. Examples include the hydrophobic effect of the lotus leaf, the reduction of fluid drag due to the riblet structure of shark skin, the directional adhesion of the gecko foot and the angular sensitivity of the multi-faceted fly eye. Surface structuring is also being used extensively in modern manufacturing. In this way many properties can be altered, for example optical, tribological, biological and fluidic. Previously, single line (profile) measurements were adequate to control manufacture of surfaces, but as the need to control the functionality of surfaces increases, there is a growing need for three-dimensional (areal) measurement and characterisation techniques. For this reason there has been considerable research, development and standardisation of areal techniques. This book will present the areal framework that is being adopted by the international community. Whereas previous books have concentrated on the measurement aspects, this book concentrates on the characterisation techniques, i.e. how to interpret the measurement data to give the appropriate (functional) information for a given task. The first part of the book presents the characterisation methods and the second part case studies that highlight the use of areal methods in a broad range of subject areas - from automobile manufacture to archaeology. Contents Introduction to Surface Topography The Areal Field Parameters The Areal Feature Parameters Areal Filtering Methods Areal Form Removal Areal Fractal Methods Choosing the Appropriate Parameter Characterisation of Individual Areal Features Multi-Scale Signature of Surface Topography Correlation of Areal Surface Texture Parameters to Solar Cell Efficiency Characterisation of Cylinder Liner Honing Textures for Production Control Characterisation of the Mechanical Bond Strength for Copper on Glass Plating Applications Inspection of Laser Structured Cams and Conrods Road Surfaces
