Download or read book Liquides Aux Interfaces written by J. Charvolin and published by North Holland. This book was released on 1990 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This school was concerned with surface properties of liquids at solid/liquid, liquid/liquid, gas/liquid interfaces. Renewal of interest in these domains belonging to classical physicochemistry appeared rather recently. This was motivated by the industrial importance of phenomena such as wetting of solids by liquids, interactions between colloidal particles, anchoring of liquid crystals, stabilization of liquid/liquid interfaces by amphiphilic molecules, and kinetics of foam. These phenomena have been analyzed along new directions taking into account ideas developed in other fields such as statistical mechanics of phase transitions and polymers, molecular interactions and long range forces in liquids. Their studies have stimulated the development of new experimental methods including observations of motion of thin films on surfaces, measurements of forces between surfaces and structures of interfacial films by neutron scattering.

Download or read book Fundamentals of Interface and Colloid Science written by J. Lyklema and published by Elsevier. This book was released on 2000-07-10 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Interface and Colloid Science (FICS) is a standard reference work with an educational nature. The emphasis is on the basic facts and phenomena, which are systematically explained. FICS aims to make interface and colloid science accessible to a wide audience. Interface and colloid science is an important and fascinating field, but one that is often overlooked and undervalued. It has applications as diverse as agriculture, mineral dressing, oil recovery, industrial chemistry, medical science and biotechnology.A deductive approach is followed, with systems of growing complexity being treated as the book progresses. Volume I: Fundamentals (1st ed. 1991, 2nd ed. 1993) reviews the physical chemistry required to understand current literature on interfacial and colloid science. The volume starts from first principles and gradually increases the level. Volume II: Solid-Liquid Interfaces (1995) treats the subject systematically for the first time, including adsorption, double layers and electronkinetics. Volume III: Interface Tension covers interfacial tensions, monolayers and wetting. - Accessible to a wide audience without a detailed knowledge of physics and chemistry - Complex mathematical derivations are kept to a minimum - Treats interfacial and colloidal phenomena from first principles (advanced command of physics and chemistry not required) - Takes the reader from elementary to expert level - Acts as a reference and a textbook - Contains extensive and detailed cumulative subject index

Download or read book Adsorption at the Gas Solid and Liquid Solid Interface written by Kenneth Sing and published by Elsevier. This book was released on 2009-06-04 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption at the Gas-Solid and Liquid-Solid Interface

Download or read book Computational Methods for Complex Liquid Fluid Interfaces written by Mohammad Taeibi Rahni and published by CRC Press. This book was released on 2015-11-11 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Complex Liquid-Fluid Interfaces highlights key computational challenges involved in the two-way coupling of complex liquid-fluid interfaces. The book covers a variety of cutting-edge experimental and computational techniques ranging from macro- to meso- and microscale approaches (including pivotal applications). As example

Download or read book Liquides aux interfaces written by Ecole d'Eté de Physique Théorique (Les Houches). and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Molecular Simulation written by Daan Frenkel and published by Elsevier. This book was released on 2001-10-19 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding Molecular Simulation: From Algorithms to Applications explains the physics behind the "recipes" of molecular simulation for materials science. Computer simulators are continuously confronted with questions concerning the choice of a particular technique for a given application. A wide variety of tools exist, so the choice of technique requires a good understanding of the basic principles. More importantly, such understanding may greatly improve the efficiency of a simulation program. The implementation of simulation methods is illustrated in pseudocodes and their practical use in the case studies used in the text. Since the first edition only five years ago, the simulation world has changed significantly -- current techniques have matured and new ones have appeared. This new edition deals with these new developments; in particular, there are sections on: - Transition path sampling and diffusive barrier crossing to simulaterare events - Dissipative particle dynamic as a course-grained simulation technique - Novel schemes to compute the long-ranged forces - Hamiltonian and non-Hamiltonian dynamics in the context constant-temperature and constant-pressure molecular dynamics simulations - Multiple-time step algorithms as an alternative for constraints - Defects in solids - The pruned-enriched Rosenbluth sampling, recoil-growth, and concerted rotations for complex molecules - Parallel tempering for glassy Hamiltonians Examples are included that highlight current applications and the codes of case studies are available on the World Wide Web. Several new examples have been added since the first edition to illustrate recent applications. Questions are included in this new edition. No prior knowledge of computer simulation is assumed.

Download or read book M canique des interfaces solides written by BRACCINI Muriel and published by Lavoisier. This book was released on 2012-09-06 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cet ouvrage rassemble différentes contributions autour des problèmes de mécanique posés par les interfaces solide/solide. Que ce soit dans les matériaux traditionnels (alliages polyphasés, composites) ou dans les nouvelles technologies (couches minces, nano- et micro-dispositifs) les interfaces sont omniprésentes et conditionnent souvent le fonctionnement optimal de ces structures multi-constituées. Les différents aspects abordés ont pour objectif d'apporter les notions de base nécessaires à l'étude et à la compréhension des états de déformation et de contrainte au voisinage des interfaces dans les matériaux hétérogènes et leurs conséquences pratiques. Cet ouvrage s'adresse aux ingénieurs confrontés à des problèmes spécifiques dus aux effets d'hétérogénéités ainsi qu'aux chercheurs scientifiques abordant les problèmes fondamentaux liés à l'influence d'une interface sur le comportement mécanique d'un élément de matière hétérogène. Il pourra également être utile aux étudiants d'école d'ingénieur, de master et de doctorat en physique de la matière condensée ou en science et génie des matériaux.

Download or read book Nanoscale Liquid Interfaces written by Thierry Ondarçuhu and published by CRC Press. This book was released on 2013-04-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the recent developments in the investigation and manipulation of liquids at the nanoscale. This new field has shown important breakthroughs on the basic understanding of physical mechanisms involving liquid interfaces, which led to applications in nanopatterning. It has also consequences in force microscopy imaging in liquid environment. The book proposes is a timely review of these various aspects. It is co-authored by 25 among the most prominent scientists in the field.

Download or read book Molecular Theory of Capillarity written by J. S. Rowlinson and published by Courier Corporation. This book was released on 2013-04-26 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: History of surface phenomena offers critical and detailed examination and assessment of modern theories, focusing on statistical mechanics and application of results in mean-field approximation to model systems. 1989 edition.

Download or read book Particles at Fluid Interfaces and Membranes written by P. Kralchevsky and published by Elsevier. This book was released on 2001-01-22 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the small world of micrometer to nanometer scale many natural and industrial processes include attachment of colloid particles (solid spheres, liquid droplets, gas bubbles or protein macromolecules) to fluid interfaces and their confinement in liquid films. This may lead to the appearance of lateral interactions between particles at interfaces, or between inclusions in phospholipid membranes, followed eventually by the formation of two-dimensional ordered arrays. The book is devoted to the description of such processes, their consecutive stages, and to the investigation of the underlying physico-chemical mechanisms. The first six chapters give a concise but informative introduction to the basic knowledge in surface and colloid science, which includes both traditional concepts and some recent results. Chapters 1 and 2 are devoted to the basic theory of capillarity, kinetics of surfactant adsorption, shapes of axisymmetric fluid interfaces, contact angles and line tension. Chapters 3 and 4 present a generalization of the theory of capillarity to the case, in which the variation of the interfacial (membrane) curvature contributes to the total energy of the system. The generalized Laplace equation is applied to determine the configurations of free and adherent biological cells. Chapters 5 and 6 are focused on the role of thin liquid films and hydrodynamic factors in the attachment of solid and fluid particles to an interface. Surface forces of various physical nature are presented and their relative importance is discussed. Hydrodynamic interactions of a colloidal particle with an interface (or another particle) are also considered.Chapters 7 to 10 are devoted to the theoretical foundation of various kinds of capillary forces. When two particles are attached to the same interface (membrane), capillary interactions, mediated by the interface or membrane, appear between them. Two major kinds of capillary interactions are described: (i) capillary immersion force related to the surface wettability (Chapter 7), (ii) capillary flotation force originating from interfacial deformations due to particle weight (Chapter 8). Special attention is paid to the theory of capillary immersion forces between particles entrapped in spherical liquid films (Chapter 9). A generalization of the theory of immersion forces allows one to describe membrane-mediated interactions between protein inclusions into a lipid bilayer (Chapter 10).Chapter 11 is devoted to the theory of the capillary bridges and the capillary-bridge forces, whose importance has been recognized in phenomena like consolidation of granules and soils, wetting of powders, capillary condensation, long-range hydrophobic attraction, etc. The nucleation of capillary bridges is also examined.Chapter 12 considers solid particles, which have an irregular wetting perimeter upon attachment to a fluid interface. The undulated contact line induces interfacial deformations, which engender a special lateral capillary force between the particles. The latter contributes to the dilatational and shear elastic moduli of particulate adsorption monolayers.Chapter 13 describes how lateral capillary forces, facilitated by convective flows and some specific and non-specific interactions, can lead to the aggregation and ordering of various particles at fluid interfaces or in thin liquid films. Recent results on fabricating two-dimensional (2D) arrays from micrometer and sub-micrometer latex particles, as well as 2D crystals from proteins and protein complexes, are reviewed. Chapter 14 presents applied aspects of the particle-surface interaction in antifoaming and defoaming. The mechanisms of antifoaming action involve as a necessary step the entering of an antifoam particle at the air-water interface. The considered mechanisms indicate the factors for control of foaminess.

Download or read book Propri t physiques du b ton et de ses constituants written by OLLIVIER Jean-Pierre and published by Lavoisier. This book was released on 2012-06-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: À l'état durci, le béton est un matériau poreux complexe. Ses propriétés d'usage (performances mécaniques ou thermiques, durabilité…) sont liées à sa structure poreuse qui elle-même dépend de l'arrangement des grains à l'état frais. Étudiant les propriétés des matériaux granulaires et celles de leurs mélanges, cet ouvrage propose différents outils permettant au formulateur de concevoir des bétons de façon innovante. Afin de décrire les méthodes de caractérisation des matériaux, il analyse les propriétés physiques sur lesquelles elles reposent et établit ainsi leurs limites. Il développe également les notions de porosité et de surface spécifique et présente les propriétés de transport des bétons (diffusion et perméation). Chaque chapitre se termine par plusieurs exercices permettant d'assimiler les connaissances théoriques présentées et de les appliquer à des problèmes concrets de génie civil.

Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-02-12 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrument

Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.

Download or read book Contact Adhesion and Rupture of Elastic Solids written by D. Maugis and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the analogy between contact mechanics and fracture mechanics proposed by the author twenty years ago, starts with a treatment of the surface energy and tension of solids and surface thermodynamics. The essential concepts of fracture mechanics are presented with emphasis on the thermodynamic aspects. Readers will find complete analytical results and detailed calculations for cracks submitted to pressure distributions and the Dugdale model. Contact mechanics and the contact and adherence of rough solids are also covered.

Download or read book Structure of Liquid Crystal Phases written by P. S. Pershan and published by World Scientific. This book was released on 1988 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current understanding of different phases as well as the phase transitions between them has only been achieved following recent theoretical advances on the effects of dimensionality in statistical physics. P S Pershan explains the connection between these two separate areas and gives some examples of problems where the understanding is still not complete. The most important example is the second order phase transition between the nematic and smectic-A phase. Others include the relation between the several hexatic phases that have been observed and the first order restacking transitions between phases that were all previously identified as smectic-B, but which should more properly be identified as crystalline-B. Some relatively recent experimental developments on the discotic phase, liquid crystal surfaces and lyotropic phases are also included. The book includes 41 major reprints of some of the recent seminal work on the structure of liquid crystals. They are introduced by a brief review of the symmetries and other properties of liquid crystalline phases. In addition, there is a discussion of the differences between true liquid crystalline phases and others that were described as liquid crystalline in the early literature, but which have since been shown to be true three-dimensional crystals. The progression from the isotropic fluid, through the nematic, smectic, and various crystalline phases can be understood in terms of a systematic decrease in symmetry, together with an accompanying variation in structure is explained. A guide to the selected reprints and a sort of ?Rosetta Stone? for these various phases is provided. The goal of this book is to explain the systematics of this progression to students and others that are new to this field, as well as to provide a useful handbook for people already working in the field.

Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by Seymour Lowell and published by Springer Science & Business Media. This book was released on 2006-04-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.

Download or read book Introduction to Zeolite Science and Practice written by P.A. Jacobs and published by Elsevier. This book was released on 2001-06-26 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the substantial progress made in the last decade in the fields of zeolites and related materials it was decided to go for an extended 2nd Edition of "Introduction to Zeolite Science and Practice". Unfortunately - as often is the case - this process took more time than expected by the Editors.In the mean time some new texts on zeolites were issued. Nevertheless, the combination of data, discussion and dedication provided by the present book is a unique coverage of the field, in the opinion of the Editors.In the present Edition the number of chapters rose from 16-22. The contributions can be divided into three categories: updated chapters by the original authors, updated chapters by an expanded or new team of authors and completely new chapters. This 2nd Edition also contains new chapters on "Zeolite-based supramolecular assemblies" (by Dirk De Vos and Pierre Jacobs, experts in this area) and on "The use of bulky probe molecules" (by Paul Kunkeler, Roger Downing and one of the Editors).Finally, the super large pore zeolites and the fast growing area of ordered mesoporous materials are dealt with by Eelco Vogt, Charlie Kresge and and Jim Vartuli. The latter two authors belong to the discoverers of the M41S family of mesoporous materials.