Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.
Download or read book The Theory of Transformations in Metals and Alloys Equilibrium and general kinetic theory written by John Wyrill Christian and published by Pergamon. This book was released on 1975 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials
Download or read book The Theory of Transformations in Metals and Alloys written by John Wyrill Christian and published by . This book was released on 1965 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drying and Storage of Cereal Grains written by B. K. Bala and published by John Wiley & Sons. This book was released on 2016-12-27 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Analysis and Computational Fluid Dynamics have been introduced in modelling and simulation of drying and storage systems, these techniques are expected to dominate the future research and development of drying and storages, and should reduce losses and improve the quality of agricultural products, enhancing food security globally. Drying and Storage of Cereal Grains, Second Edition, covers the wide spectrum of drying and storage methods applied to economically important cereal produce, providingnumerical examples for better understanding the complexity in drying and storage systems through modelling and simulation, aiding design and management of drying and storage systems. Chapters 1 to 8 look at air and grain moisture equilibria, psychrometry, physical and thermal properties of cereal grains, principles of air flow, and provide detailed analyses of grain drying.Chapters 9 to 13 focus on temperature and moisture in grain storages, and provide comprehensive treatment of modern grain storage systems. The book also includes a number of unsolved problems at the end of each chapter for further practice. This revised second edition includes new sections on - heat of sorption finite element modeling of single kernel CFD modeling of fluidized bed drying exergy analysis and neural network modeling numerical solution of two dimensional temperature and moisture changes in stored grain This book will provide students in agricultural engineering and food engineering with a wide spectrum of drying and storage studies previously unavailable in a single monograph. It will also serve as an excellent reference for practicing agricultural engineers, food engineers and food technologists.
Download or read book American Druggist written by and published by . This book was released on 1885 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin written by Illinois State Geological Survey and published by . This book was released on 1908 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drying and Storage Of Grains and Oilseeds written by Donald B. Brooker and published by Springer Science & Business Media. This book was released on 1992-01-31 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text and reference discusses the drying of grains, in particular the staple cereals, maize, rice, and wheat, and the oilseeds, soybeans and canola. The basic physical and thermodynamic properties of grain and air are examined, and the theory of the drying process is developed. Design of the optimum operating conditions for on-farm and off-farm dryers are presented. The book is written as an engineering text, but should also prove beneficial to all who are interested in the proper drying and storage of grains. Examples and problems are given in both S.I. and Imperial units.
Download or read book Theory and Practice of Additive Manufacturing written by Tuhin Mukherjee and published by John Wiley & Sons. This book was released on 2023-09-26 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Practice of Additive Manufacturing Discover the ins and outs of additive manufacturing in this student-friendly textbook Also known as 3D printing, additive manufacturing is a process by which layers of material are added to create three-dimensional objects guided by a digital model. It has revolutionized the design and manufacture of customized products, facilitating the rapid, flexible production of a huge range of goods. It promises to revolutionize manufacturing engineering, shorten industrial supply chains, and more. Theory and Practice of Additive Manufacturing provides the first introduction to this subject designed specifically for students. Balancing the underlying theories behind additive manufacturing with concrete applications, it guides readers through basic processes, essential tools and materials, and more. The result is ideal for readers looking to bring additive manufacturing to bear on engineering or industry careers of almost any kind. Theory and Practice of Additive Manufacturing features: Over 100 worked-out example problems Detailed discussion of the emerging digital tools including mechanistic modeling, machine learning, and more Commitment to pedagogy and reinforcement geared toward student learning outcomes Theory and Practice of Additive Manufacturing is ideal for undergraduate and graduate students and instructors in introductory additive manufacturing courses, as well as practicing engineers and researchers working in industries that use additive manufacturing technologies, including aerospace, automotive, and consumer goods.
Download or read book Transactions of the Pharmaceutical Meetings written by and published by . This book was released on 1884 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Phase Sintering written by R.M. German and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.
Download or read book Ceramics Science and Technology Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-12 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2003-07-31 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.
Download or read book Grains written by Fuji Jian and published by CRC Press. This book was released on 2021-12-23 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying and storage are two significant unit operations in the food industry and are applied to both raw and processed products including cereal grains, oilseeds, legumes, flour, noodle, coffee, and cornstarch. The common characteristic of these materials is that all of them are hygroscopic and contain water. The hygroscopic properties are influenced by their physical properties, which are influenced by their storage environments such as bins, warehouses, bunkers, and temporary storage structures. This book focuses on the storage and drying of bulk products in these storage structures. On many occasions in our work with the grain storage and drying personnel especially our graduate students and industry contacts, we found a book explaining the fundamental principles of grain storage and drying is needed. Therefore, the primary objective of this book is to help readers understand the fundamental principles of grain storage and drying and develop a well-informed approach to solve grain storage and drying problems. Technologies for grain storage and drying are advanced through research; therefore, literature review and background on each topic has also been included. The book is generally intended for grain storage and drying students, engineers, and scientists. As reflected in the contents which are presented at several levels of depth, this book will serve well readers with different backgrounds and interests. An effort has been made to allow for independent reading of different sections, and to make a large part of this work accessible to a non-mathematical audience. The authors have combined their experience of teaching grain storage and drying to undergraduate and graduate students in the faculties of Agricultural and Food Sciences and Engineering. Material in the book is organized into broad topic areas: physical properties (Chapters 1 and 2), grain temperature and moisture (Chapters 2 and 6), water in biomaterials and relationship with its environment (Chapter 3), fundamental principles of aeration, drying, and rewetting (Chapter 4), and mathematical modelling of isotherm, drying, and re-wetting (Chapter 5). We hope our readers will benefit from the contents of the book for many decades.
Download or read book Welding Metallurgy and Weldability written by John C. Lippold and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the weldability aspects of structural materials used in a wide variety of engineering structures, including steels, stainless steels, Ni-base alloys, and Al-base alloys Welding Metallurgy and Weldability describes weld failure mechanisms associated with either fabrication or service, and failure mechanisms related to microstructure of the weldment. Weldability issues are divided into fabrication and service related failures; early chapters address hot cracking, warm (solid-state) cracking, and cold cracking that occur during initial fabrication, or repair. Guidance on failure analysis is also provided, along with examples of SEM fractography that will aid in determining failure mechanisms. Welding Metallurgy and Weldability examines a number of weldability testing techniques that can be used to quantify susceptibility to various forms of weld cracking. Describes the mechanisms of weldability along with methods to improve weldability Includes an introduction to weldability testing and techniques, including strain-to-fracture and Varestraint tests Chapters are illustrated with practical examples based on 30 plus years of experience in the field Illustrating the weldability aspects of structural materials used in a wide variety of engineering structures, Welding Metallurgy and Weldability provides engineers and students with the information needed to understand the basic concepts of welding metallurgy and to interpret the failures in welded components.
