Download or read book Flow Processes in Faults and Shear Zones written by G. Ian Alsop and published by Geological Society of London. This book was released on 2004 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults and their deeper level equivalents, shear zones, are localized regions of intense deformation within the Earth. They are recognized at all scales from micro to plate boundary, and are important examples of the nature of heterogeneous deformation in natural rocks. Faults and shear zones are significant as they profoundly influence the location, architecture and evolution of a broad range of geological phenomenao The topography and bathymetry of the Earth's surface is marked by mountain belts and sedimentary basins that are controlled by faults and shear zoneso In addition, faults and shear zones control fluid migration and transport including hydrothermal and hydrocarbon systems. Once faults and shear zones are established, they are often long-lived features prone to multiple reactivation over very large time-scales. This collection of papers addresses lithospheric deformation and the rheology of shear zones, together with processes of partitioning and the unravelling of fault and shear zone histories.
Download or read book The Geometry and Growth of Normal Faults written by C. Childs and published by Geological Society of London. This book was released on 2017-11-06 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Normal faults are the primary structures that accommodate extension of the brittle crust. This volume provides an up-to-date overview of current research into the geometry and growth of normal faults. The 23 research papers present the findings of outcrop and subsurface studies of the geometrical evolution of faults from a number of basins worldwide, complemented by analogue and numerical modelling studies of fundamental aspects of fault kinematics. The topics addressed include how fault length changes with displacement, how faults interact with one another, the controls of previous structure on fault evolution and the nature and origin of fault-related folding. This volume will be of interest to those wishing to develop a better understanding of the structural geological aspects of faulting, from postgraduate students to those working in industry.
Download or read book The Internal Structure of Fault Zones written by Christopher A. J. Wibberley and published by Geological Society of London. This book was released on 2008 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults are primary focuses of both fluid migration and deformation in the upper crust. The recognition that faults are typically heterogeneous zones of deformed material, not simple discrete fractures, has fundamental implications for the way geoscientists predict fluid migration in fault zones, as well as leading to new concepts in understanding seismic/aseismic strain accommodation. This book captures current research into understanding the complexities of fault-zone internal structure, and their control on mechanical and fluid-flow properties of the upper crust. A wide variety of approaches are presented, from geological field studies and laboratory analyses of fault-zone and fault-rock properties to numerical fluid-flow modelling, and from seismological data analyses to coupled hydraulic and rheological modelling. The publication aims to illustrate the importance of understanding fault-zone complexity by integrating such diverse approaches, and its impact on the rheological and fluid-flow behaviour of fault zones in different contexts.
Download or read book The Initiation Propagation and Arrest of Joints and Other Fractures written by John W. Cosgrove and published by Geological Society of London. This book was released on 2004 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a state of the art look at our understanding of joint development in the crust. Answers are provided for such questions as the mechanisms by which joints are initiated, the factors controlling the path they follow during the propagation process, and the processes responsible for the arrest of joints. Many of the answers to these questions can be inferred from the geometry of joint surface morphology and joint patterns. Joints are a record of the orientation of stress at the time of propagation and as such they are also useful records of ancient stress fields, regional and local. Because outcrop and subsurface views of joints are limited, statistical techniques are required to characterize joints and joint sets. Finally, joints are subject to post-propagation stresses that further localize deformation and are the focus for the development of new structures.
Download or read book Faulting Fracturing and Igneous Intrusion in the Earth s Crust written by David Healy and published by Geological Society of London. This book was released on 2012 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologists have long grappled with understanding the mechanical origins of rock deformation. Stress regimes control the nucleation, growth and reactivation of faults and fractures; induce seismic activity; affect the transport of magma; and modulate structural permeability, thereby influencing the redistribution of hydrothermal and hydrocarbon fluids. Experimentalists endeavour to recreate deformation structures observed in nature under controlled stress conditions. Earth scientists studying earthquakes will attempt to monitor or deduce stress changes in the Earth as it actively deforms. All are building upon the pioneering research and concepts of Ernest Masson Anderson, dating back to the start of the twentieth century. This volume celebrates Anderson's legacy, with 14 original research papers that examine faulting and seismic hazard; structural inheritance; the role of local and regional stress fields; low angle faults and the role of pore fluids; supplemented by reviews of Andersonian approaches and a reprint of his classic paper of 1905--
Download or read book Advances in Geophysics written by and published by Elsevier. This book was released on 2004-12-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The critically acclaimed serialized review journal for nearly fifty years, Advances in Geophysics is a highly respected publication in the field of geophysics. Since 1952, each volume has been eagerly awaited, frequently consulted, and praised by researchers and reviewers alike. Now with over 45 volumes, the Serial contains much material still relevant today-truly an essential publication for researchers in all fields of geophysics.
Download or read book Tensile Fracturing in Rocks written by Dov Bahat and published by Springer Science & Business Media. This book was released on 2005-08-31 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Tensile Fracturing in Rocks’ presents field observations on fracturing of sedim- tary rocks and granite outcrops from various provinces in three continents. It also combines results of recent experiments conducted at different laboratories around the world with current theories on fracturing. In treating faults, this book limits itself to faults that are associated with joint sets produced by definable causes and occasi- ally to cases where interaction between the two types of fracture – faults and joints – is not clear. The book’s subject matter is divided over six chapters, which are briefly described below. Chapter 1 summarizes current key concepts in fracture physics. It starts with a pr- entation of the elastic theory of fracture, and concentrates on the results of linear el- tic fracture mechanics. The chapter touches also upon other fracture properties, e.g., crack nucleation, dynamic fracturing and slow fracturing processes. Nucleation is - dressed by statistical mechanics methods incorporating modern approaches of th- mal and fiber bundle processes. The analyses of dynamic fracturing and slow fract- ing focus on the differences, as compared to the linear elastic approach. The cont- versy in interpreting experimental dynamic results is highlighted, as are the surface morphology patterns that emerge in fracturing and the non-Griffith crack extension criterion in very slow fracturing processes.
Download or read book Incremental Fault Growth written by Holly Nicole Caprio and published by . This book was released on 2007 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mechanics of Earthquakes and Faulting written by Christopher H. Scholz and published by Cambridge University Press. This book was released on 2002-05-02 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of earthquakes and faulting processes has developed significantly since publication of the successful first edition of this book in 1990. This revised edition, first published in 2002, was therefore thoroughly up-dated whilst maintaining and developing the two major themes of the first edition. The first of these themes is the connection between fault and earthquake mechanics, including fault scaling laws, the nature of fault populations, and how these result from the processes of fault growth and interaction. The second major theme is the central role of the rate-state friction laws in earthquake mechanics, which provide a unifying framework within which a wide range of faulting phenomena can be interpreted. With the inclusion of two chapters explaining brittle fracture and rock friction from first principles, this book is written at a level which will appeal to graduate students and research scientists in the fields of seismology, physics, geology, geodesy and rock mechanics.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2000 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Strike slip Deformation Basin Formation and Sedimentation written by Kevin T. Biddle and published by American Society of Civil Engineers. This book was released on 1985 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume is organized into three sections entitled Overview, Extensional Settings and Contractional Settings together with a glossary of terms having to do with strike-slip deformation, basin formation and sedimentation.
Download or read book Reservoir Model Design written by Philip Ringrose and published by Springer. This book was released on 2014-10-03 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives practical advice and ready to use tips on the design and construction of subsurface reservoir models. The design elements cover rock architecture, petrophysical property modelling, multi-scale data integration, upscaling and uncertainty analysis. Philip Ringrose and Mark Bentley share their experience, gained from over a hundred reservoir modelling studies in 25 countries covering clastic, carbonate and fractured reservoir types. The intimate relationship between geology and fluid flow is explored throughout, showing how the impact of fluid type, production mechanism and the subtleties of single- and multi-phase flow combine to influence reservoir model design. Audience: The main audience for this book is the community of applied geoscientists and engineers involved in the development and use of subsurface fluid resources. The book is suitable for a range of Master’s level courses in reservoir characterisation, modelling and engineering. · Provides practical advice and guidelines for users of 3D reservoir modelling packages · Gives advice on reservoir model design for the growing world-wide activity in subsurface reservoir modelling · Covers rock modelling, property modelling, upscaling and uncertainty handling · Encompasses clastic, carbonate and fractured reservoirs
Download or read book Tectonics of Strike slip Restraining and Releasing Bends written by W. D. Cunningham and published by Geological Society of London. This book was released on 2007 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the tectonic complexity and diversity of strike-slip restraining and releasing bends with 18 contributions divided into four thematic sections: a topical review of fault bends and their global distribution; bends, sedimentary basins and earthquake hazards; restraining bends, transpressional deformation and basement controls on development; releasing bends, transtensional deformation and fluid flow.
Download or read book A Dictionary of Mining Mineral and Related Terms written by United States. Bureau of Mines and published by . This book was released on 1968 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes about 55,000 individual mining and mineral industry term entries with about 150,000 definitions under these terms.
Download or read book The Northern Highlands of Scotland written by G. S. Johnstone and published by . This book was released on 1989 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Techniques of Modern Structural Geology Strain analysis written by John G. Ramsay and published by . This book was released on 1983 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the case of nearly all branches of science a great advance was made when accurate quantitative methods were used of more qualitative. One great advantage of this is that it necessitates more accurate thought, points out what remains to be learned, and sometimes small residual quantities, which otherwise would escape attention, indicate important facts.
Download or read book Structural and Tectonic Modelling and its Application to Petroleum Geology written by R.M. Larsen and published by Elsevier. This book was released on 2013-10-22 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a unique combination of structural and tectonic modelling with applied petroleum geological problems. Focussing on the Norwegian Continental Shelf and neighbouring areas, it includes discussion covering all scales - from development of sedimentary basins, to formation of fractures and joints on a microscale - and from exploration, to the exploitation of hydrocarbons. The book's coverage of structural and tectonic modelling, petroleum geology applications, and the treatment of the Norwegian Continental Shelf should make this book an invaluable resource book for advanced students of structural and tectonic modelling, teachers, and researchers; as well as for geologists and geophysicists in the petroleum industry.
