Download or read book Light Metals 2007 Recycling and Waste Processing written by Morten Sorlie and published by Wiley-TMS. This book was released on 2007-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers are based on presentations prepared for the Recycling and Waste Processing Symposium. The original symposium description is as follows: "The symposium will present current technology and operational practice in the collection, upgrading, thermal and chemical processing, and refining of scrap metal, engineered materials, and waste products. Symposium topics will include: Scrap Collection and Sorting Scrap Pretreatment Recycling Economics Recycled Material in Primary Smelters Melting Furnace Development UBC and Dross Processing Recycling of Magnesium Precious Metals Recycling Recycling of Refractory Metals Recycling of Lead EAF Dust Waste Materials Handling Electronic Materials Recycling Automotive and Transportation Recycling Recycling of Low-Melting Point Metals Safety and Environmental Practices Recycling in the Far East Recycling in Europe"
Download or read book Light Metals 2007 proceedings of the technical sessions presented by the TMS Aluminium Committee at the TMS 2007 Annual Meeting Exhibition Orlando Florida USA February 25 March 1 2007 Vol 5 Recycling and waste processing written by Morten Sørlie and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Metals 2007 written by Morten Sorlie and published by T M S Publications. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light Metals 2007 presents the most up-to-date information on the state of primary aluminum science and technology. Its mixture of practical applied technology and hard science is of invaluable benefit to the global aluminum industry as it strives to cut costs and increase profitability. The areas covered include: Volume 1: Alumina and Bauxite; Volume 2: Aluminum Reduction Technology; Volume 3: Cast Shop Technology; Volume 4: Electrode Technology (formerly Carbon Technology); Volume 5: Recycling and Waste Processing; and, Volume 6: The Material Recycling Industry: Global Challenges and Opportunities.
Download or read book Light Metals 2007 The Materials Recycling Industry written by Morten Sorlie and published by Wiley-TMS. This book was released on 2007-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers were presented as part of the plenary discussion, "Aluminum Recycling Industry: Global Challenges and Opportunities," held at the 2007 TMS Annual Meeting in Orlando, FL. Topics covered include: Historical Perspectives, Case Studies, Recovery Systems, Environmental Impact, Separation Technologies.
Download or read book Aluminum Recycling Second Edition written by Mark E. Schlesinger and published by CRC Press. This book was released on 2013-12-21 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: What makes this book unique is a specific focus on aluminum recovery, rather than just recycling in general. It also offers an integrated discussion of scrap recovery and re-melting operations and includes economic as well as technical elements of recycling. Important topics include a discussion of the scrap aluminum marketplace and how secondary aluminum is collected and sorted, the design and operation of furnaces for melting scrap, the refining of molten aluminum, and the recovery and processing of dross from re-melting operations. This second edition features more information on aluminum scrap pricing and the economics of recycling, the analysis of dross processing methods currently in use by the industry, and drosses produced. The book has been updated throughout to include the most up-to-date information.
Download or read book Sustainable Utilization of Metals written by Bernd Friedrich and published by MDPI. This book was released on 2020-05-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high demand for advanced metallic materials raises the need for an extensive recycling of metals and such a sustainable use of raw materials. "Sustainable Utilization of Metals - Processing, Recovery and Recycling" comprises the latest scientific achievements in efficient production of metals and such addresses sustainable resource use as part of the circular economy strategy. This policy drives the present contributions, aiming on the recirculation of EoL-streams such as Waste Electric and Electronic Equipment (WEEE), multi-metal alloys or composite materials back into metal production. This needs a holistic approach, resulting in the maximal avoidance of waste. Considering both aspects, circular economy and material design, recovery and use of minor metals play an essential role, since their importance for technological applications often goes along with a lack of supply on the world market. Additionally, their ignoble character and low concentration in recycling materials cause an insufficient recycling rate of these metals, awarding them the status of “critical metals”. In order to minimize losses and energy consumption, this issue explores concepts for the optimization concerning the interface between mechanical and thermal pre-treatment and metallurgical processes. Such new approaches in material design, structural engineering and substitution are provided in the chapters.
Download or read book Recycling of Metals and Materials written by Ruth K. Seidman and published by . This book was released on 1972 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fourth International Symposium on Recycling of Metals and Engineered Materials written by Donald L. Stewart, Jr. and published by Wiley-TMS. This book was released on 2000-08-08 with total page 1432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings collection continues the tradition established by earlier TMS Recycling Meetings in this series by presenting fundamental and practical aspects of recycling metals and engineered materials. This collection concentrates on fundamental and applied research and industrial practices in the recycling of a wide variety of materials including aluminum scrap recycling; aluminum dross processing; aluminum by-product recovery; automotive recycling; magnesium & titanium recycling; EAF dust processing; secondary zinc; secondary lead; secondary copper, nickel & cobalt; spent catalyst recycling; precious metals recycling; refractory recycling; and electronics/plating.
Download or read book The Physical Separation and Recovery of Metals from Waste Volume One written by Alan Veasey and published by CRC Press. This book was released on 1993-09-10 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the physical processes used for the separation of secondary metals from waste sources. The introduction briefly considers the history of the secondary metals industries, defines the terms used in materials recycling and discusses the potential for resource recovery and improved processing. A comprehensive survey is given of the unit operations employed for metals recovery and reclamation, and this is followed by detailed descriptions of processes used to treat fragmentized metal wastes and granulated metal wastes. The final chapter reviews the processing of urban wastes for metals recovery, and gives details of modern plants and practices. The volume aims to bring together technical information on metals recovery from a wide range of sources in order to give a unified review of an important engineering and environmental topic.
Download or read book Light Metals 2012 written by Carlos Suarez and published by Springer. This book was released on 2016-12-23 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt: An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.
Download or read book Light Metals 2016 written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 collection will include papers from the following symposia: Alumina and Bauxite Aluminum Alloys, Processing, and Characterization Aluminum Reduction Technology Cast Shop Technology Electrode Technology Strip Casting
Download or read book The Physical Separation and Recovery of Metals from Waste Volume One written by Alan Veasey and published by CRC Press. This book was released on 1993-09-10 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the physical processes used for the separation of secondary metals from waste sources. The introduction briefly considers the history of the secondary metals industries, defines the terms used in materials recycling and discusses the potential for resource recovery and improved processing. A comprehensive survey is given of the
Download or read book Metals in Wastes written by Karolina Wieszczycka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals in Wastes is an excellent guide for scientists, students, engineers, chemists, and industrial chemists who are looking for knowledge of the main sources of metals in industrial wastes. Metals are valuable materials that can be recycled again and again without degrading their properties. The recycling of metals enables us to preserve natural resources while requiring less energy to process than the manufacture of new products using virgin raw materials. A team of experts reviews the state-of-the-art and provides the readers not only with a comprehensive in-depth overview of the main composition of wastes but also discloses innovative methods which have been applied for recovery of critical and valuable metals in petrochemical industry, rubber, energy and automotive industries. This know-how could be considered as a useful reference tool for moving towards the zero-waste economy. Additionally, the book describes the economic aspects of metals recovery from various sources. This is essential for those already involved in the metals business and also for the financial, investment and advisory community internationally.
Download or read book Future of Light Metals and Government Plant Disposals with Reference to Interests of Small Business written by United States. Congress. Senate. Special Committee to Study Problems of American Small Business and published by . This book was released on 1947 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Recycling written by and published by UN. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal recycling is a complex business that is becoming increasingly difficult! Recycling started long ago, when people realized that it was more resource- and cost-efficient than just throwing away the resources and starting all over again. In this report, we discuss how to increase metal-recycling rates - and thus resource efficiency - from both quantity and quality viewpoints. The discussion is based on data about recycling input, and the technological infrastructure and worldwide economic realities of recycling. Decision-makers set increasingly ambitious targets for recycling, but far too much valuable metal today is lost because of the imperfect collection of end-of-life (EoL) products, improper practices, or structural deficiencies within the recycling chain, which hinder achieving our goals of high resource efficiency and resource security, and of better recycling rates.
Download or read book Recovery and Recycling of Valuable Metals written by Dariush Azizi and published by Mdpi AG. This book was released on 2022-01-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals have always played a significant role in human life, and the current global growth and prosperity are directly dependent on these materials. With the rapidly growing global demand for metals, their extraction from natural minerals (as their primary sources) has been enhanced, causing a significant reduction in the grade and quality of the ores in ore deposits and leading to the production of huge amounts of waste, which requires management. In light of this, new proposals to develop more advanced metal recovery technologies from minerals are needed. Additionally, the huge quantity of waste generated through all steps of metal production is known to be a source of environmental pollution, while its valorization can create value via recycling metals or even though use in the production of other valuable materials. Such waste valorization is also in line with the United Nations' Sustainable Development Goals (SDGs), as well as the implementation of the Paris Agreement. In this regard, the recycling of end-user products in order to reproduce valuable metals can also create significant value and reduce mining activities, and thus, their harmful consequences worldwide. Therefore, research and development in the state-of-the-art technologies for the recovery and recycling of metals are absolutely necessary. The aim of this Special Issue was to collect a range of articles on different aspects of valuable metal recovery and recycling from primary and secondary sources, as well as to decipher all new methods, processes, and knowledge in valuable metal production. We hope that this open access Special Issue will provide a great opportunity to demonstrate the work of researchers working in this area all around the world and help to provide new ideas for researchers who are working in the areas of hydrometallurgy, mineral processing, and waste recycling and valorization.
Download or read book Essential Readings in Light Metals Volume 1 Alumina and Bauxite written by Don Donaldson and published by Springer. This book was released on 2017-01-04 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Five decades of landmark original research findings and reviews Highlighting some of the most important findings reported over the past five decades, this volume features some of the best technical papers published on alumina and bauxite from 1963 to 2011. Papers have been divided into thirteen subject sections for ease of access. Each section has a brief introduction and a list of recommended articles for researchers interested in exploring each subject in greater depth. Only about fifteen percent of the alumina and bauxite papers ever published in Light Metals were chosen for this volume. Selection was based on a rigorous review process. Among the papers, readers will find landmark original research findings and expert reviews summarizing current thinking on key topics at the time of publication. From basic research to advanced applications, the articles published in this volume collectively represent our body of knowledge in alumina and bauxite. Students, scientists, and engineers should turn to this volume to discover the historical development of alumina and bauxite research as well as the current state of the science and the technology. Moreover, the papers published in this volume will serve as a springboard for future research and discoveries.
