Download or read book Layout aware Modeling and Analysis Methodologies for Transient Radiation Effects on Integrated Circuit Electronics written by Jeffrey Scott Kauppila and published by . This book was released on 2015 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Effects on Integrated Circuits and Systems for Space Applications written by Raoul Velazco and published by Springer. This book was released on 2019-04-10 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with invaluable overviews and updates of the most important topics in the radiation-effects field, enabling them to face significant challenges in the quest for the insertion of ever-higher density and higher performance electronic components in satellite systems. Readers will benefit from the up-to-date coverage of the various primary (classical) sub-areas of radiation effects, including the space and terrestrial radiation environments, basic mechanisms of total ionizing dose, digital and analog single-event transients, basic mechanisms of single-event effects, system-level SEE analysis, device-level, circuit-level and system-level hardening approaches, and radiation hardness assurance. Additionally, this book includes in-depth discussions of several newer areas of investigation, and current challenges to the radiation effects community, such as radiation hardening by design, the use of Commercial-Off-The-Shelf (COTS) components in space missions, CubeSats and SmallSats, the use of recent generation FPGA’s in space, and new approaches for radiation testing and validation. The authors provide essential background and fundamentals, in addition to information on the most recent advances and challenges in the sub-areas of radiation effects. Provides a concise introduction to the fundamentals of radiation effects, latest research results, and new test methods and procedures; Discusses the radiation effects and mitigation solutions for advanced integrated circuits and systems designed to operate in harsh radiation environments; Includes coverage of the impact of Small Satellites in the space industry.

Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by MDPI. This book was released on 2019-08-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.

Download or read book Radiation Effects of Advanced Electronic Devices and Circuits written by Yaqing Chi and published by . This book was released on 2024-06-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: As integrated circuit technologies continue to scale down and electronic devices become more complex, their susceptibility to ionizing radiation has introduced numerous exciting challenges, anticipated to drive research over the next decade. Consequently, new solutions are necessary to mitigate radiation sensitivity in advanced devices and integrated circuits. The aim of this reprint is to disclose the basic mechanisms of radiation effects for advanced devices and the breakthrough of new solutions to assess and mitigate radiation sensitivity in advanced devices and integrated circuits. This reprint presents new modeling approaches that predict how radiation impacts electronic devices and circuits. Accurate models are essential for designing devices that can tolerate radiation without significant performance degradation. We also focus on the innovative design and fabrication techniques that enhance the radiation tolerance of integrated circuits. Moreover, some discussions highlight new testing protocols and methodologies that provide more accurate and comprehensive evaluations of radiation hardness, as well as the latest advancements and trends that are of particular interest to researchers and professionals in the radiation effects community. Overall, this issue offers valuable insights into the challenges and opportunities in this rapidly evolving field, highlighting the critical importance of continued innovation and collaboration to address the complex problems posed by radiation in modern electronics.

Download or read book Radiation Effects and Soft Errors in Integrated Circuits and Electronic Devices written by Dan M. Fleetwood and published by World Scientific. This book was released on 2004 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed treatment of radiation effects in electronic devices, including effects at the material, device, and circuit levels. The emphasis is on transient effects caused by single ionizing particles (single-event effects and soft errors) and effects produced by the cumulative energy deposited by the radiation (total ionizing dose effects). Bipolar (Si and SiGe), metalOCooxideOCosemiconductor (MOS), and compound semiconductor technologies are discussed. In addition to considering the specific issues associated with high-performance devices and technologies, the book includes the background material necessary for understanding radiation effects at a more general level. Contents: Single Event Effects in Avionics and on the Ground (E Normand); Soft Errors in Commercial Integrated Circuits (R C Baumann); System Level Single Event Upset Mitigation Strategies (W F Heidergott); Space Radiation Effects in Optocouplers (R A Reed et al.); The Effects of Space Radiation Exposure on Power MOSFETs: A Review (K Shenai et al.); Total Dose Effects in Linear Bipolar Integrated Circuits (H J Barnaby); Hardness Assurance for Commercial Microelectronics (R L Pease); Switching Oxide Traps (T R Oldham); Online and Realtime Dosimetry Using Optically Stimulated Luminescence (L Dusseau & J Gasiot); and other articles. Readership: Practitioners, researchers, managers and graduate students in electrical and electronic engineering, semiconductor science and technology, and microelectronics."

Download or read book Transient radiation Effects on Electronics Handbook written by Richard K. Thatcher and published by . This book was released on 1967 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the purpose of this document to present information which will be useful to the circuit design engineer when designing electronic systems for survival in a nuclear burst environment. The information presented covers only those areas directly related to electronic parts, circuits and systems. The nuclear burst environment which is covered is both transient and steady state and includes all radiation effects except EMP. Areas which are covered in detail are the interaction of transient radiation with matter, discrete semi-conductor devices, integrated circuits, capacitors, resistors, circuit hardening and circuit analysis techniques. Supplementing this document is a classified TREE Handbook which discusses the nuclear weapon burst environment, interaction of transient radiation with matter, and system hardening.

Download or read book Ionizing Radiation Effects in Electronics written by Marta Bagatin and published by CRC Press. This book was released on 2018-09-03 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ionizing Radiation Effects in Electronics: From Memories to Imagers delivers comprehensive coverage of the effects of ionizing radiation on state-of-the-art semiconductor devices. The book also offers valuable insight into modern radiation-hardening techniques. The text begins by providing important background information on radiation effects, their underlying mechanisms, and the use of Monte Carlo techniques to simulate radiation transport and the effects of radiation on electronics. The book then: Explains the effects of radiation on digital commercial devices, including microprocessors and volatile and nonvolatile memories—static random-access memories (SRAMs), dynamic random-access memories (DRAMs), and Flash memories Examines issues like soft errors, total dose, and displacement damage, together with hardening-by-design solutions for digital circuits, field-programmable gate arrays (FPGAs), and mixed-analog circuits Explores the effects of radiation on fiber optics and imager devices such as complementary metal-oxide-semiconductor (CMOS) sensors and charge-coupled devices (CCDs) Featuring real-world examples, case studies, extensive references, and contributions from leading experts in industry and academia, Ionizing Radiation Effects in Electronics: From Memories to Imagers is suitable both for newcomers who want to become familiar with radiation effects and for radiation experts who are looking for more advanced material or to make effective use of beam time.

Download or read book Radiation Tolerant Electronics Volume II written by Paul LeRoux and published by Mdpi AG. This book was released on 2023-01-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade. After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects.

Download or read book Radiation Tolerant Electronics Volume II written by Paul Leroux and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade.After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects.

Download or read book Analysis of Radiation Induced Coupling Effects Between Integrated Circuit Elements written by F. Frankovsky and published by . This book was released on 1967 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report describes the investigation of several elements of an integrated circuit model in the initial phase of a program to analyze pulsed ionizing radiation effects on these elements. The radiation effects on silicon dioxide and semiconductor structures incorporating silicon-dioxide layers are considered. Physical and mathematical models are developed for this analysis. A SCEPTRE simulation was developed to solve the equations of the mathematical model. Experimental techniques are established for future dielectric studies under this program. Also analyzed is the isolation diffusion across the intersection of the NPN or PNP junctions of an isolation diffusion model. IBM recommends that no further effort be expended in this analysis. The transient radiation behavior of a junction FET is reviewed and a synthesis of an equivalent circuit model is described. (Author).

Download or read book Handbook of Modeling for Circuit Analysis Including Radiation Effects written by and published by . This book was released on 1979 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a compilation and organization of previous research in computer modeling of semiconductor devices. It is designed to serve as a reference for the analyst who must analyze the effects of nuclear radiation on electronic circuits. It uses a modular approach wherein the analyst uses the simplest model which will yield the desired accuracy. The latest technology in representing second order effects is included in the handbook. The organization of the handbook proceeds from diodes to transistors, MOSFETs, IFETs, SCRs, UJTs, transformers and integrated circuits. The final chapter presents examples of computer aided analyses. (Author).

Download or read book Analysis and Modeling Methods for Predicting Functional Robustness of Integrated Circuits During Fast Transient Events written by Rémi Bèges and published by . This book was released on 2017 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization of electronic circuits continues nowadays with the more recent technology nodes being applied to diverse fields of application such as automotive. Very dense and small integrated circuits are interesting for economic reasons, because they are cheaper to manufacture in mass and can pack more functionalities with elevated performances. The counterpart of size reduction is integrated circuits becoming more fragile electrically. In the automotive world, the new trend of fully autonomous driving is seeing tremendous progress recently. Autonomous vehicles must take decisions and perform critical actions such as braking or steering the wheel. Those decisions are taken by electronic modules, that have now very high responsibilities with regards of our safety. It is important to ensure that those modules will operate no matter the kind of disturbances they can be exposed to. The automotive world is a quite harsh environment for electronic systems. A major source of electrical stress is called the Electrostatic Discharge (ESD). It is a very sudden flow of electricity of large amplitude capable of destroying electronic components, or disturb them during their normal operation. This research focuses on functional failures where functionality can be temporarily lost after an ESD with various impact on the vehicle. To guarantee before manufacturing that a module and its components will perform their duty correctly, new analysis and prediction methods are required against soft-failures caused by electrostatic discharges. In this research, different approaches have been explored and proposed towards that goal. First, a modelling method for reproducing the ESD waveforms from the test generator up to the integrated circuit input is presented. It is based on a hierarchical approach where each element of the system is modelled individually, then added to the complete setup model. A practical case of functional failure at silicon-level is analyzed using simulation tools. To acquire more data on this fault, a testchip has been designed. It contains on-chip monitoring structures to measure voltage and current, and monitor function behavior directly at silicon-level. The last part of this research details different analysis methods developed for identifying efficiently functional weaknesses. The methods rely heavily on simulation tools, and prototypes have been implemented to prove the initial concepts. The first method models each function inside the chip individually, using behavioral models, then enables to connect the models together to deduce the full function's robustness. It enables hierarchical analysis of complex integrated circuit designs, to identify potential weak spots inside the circuit that could require more shielding or protection. The second method is focused on constructing equivalent electrical black box models of integrated circuit functions. The goal is to model the IC with a behavioral, black-box model capable of reproducing waveforms in powered conditions during the ESD. In summary, this research work has led to the development of several hardware and software prototypes. It has also highlighted important modelling challenges to solve in future works to achieve better functional robustness against electrostatic discharges.

Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.

Download or read book Principles and Techniques of Radiation Hardening written by Norman J. Rudie and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Techniques for Variation Aware Modeling in Static Timing Analysis of Integrated Circuits written by Suryanarayana Pendela and published by . This book was released on 2010 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of the Semiconductor Industry's success can be attributed to Moore's law which states that the number of transistors on an integrated circuit would double approximately every two years. Semiconductor industry has ever since progressed from designs with a few hundred transistors to today's complex designs incorporating millions of transistors. The current era of nanometer technologies threatens to impact the sustainability of Moore's law with random variations in the manufacturing process impacting yield in a big way. Considerable research efforts have since been devoted to account for these variations leading to a new paradigm called Design for Manufacturing (DFM). Traditional Static Timing Analysis (STA) has given way to Statistical Static Timing Analysis (SSTA) techniques wherein the parameters considered are treated as random variables with assigned probability distribution functions. However, SSTA is still not seen as a mature flow for commercial adoption, owing to the inherent complex nature of the SSTA algorithms. In this thesis, we propose an alternate framework to STA under the presence of process variations using Interval Valued Static Timing Analysis (IVSTA). Process variations are accounted for by using a macro-modeling framework providing an efficient and fast timing analysis technique. Results on standard benchmarks show that IVSTA can predict the timing slack by a margin of 5-10% error and huge improvement of runtime compared to traditional corner based analysis. The framework involves a one-time characterization of the standard cell library and can be incorporated without much modification to the design flow. An iterative optimization framework using IVSTA engine is also presented which optimizes a routed netlist for variations at a minimum penalty of area and power.

Download or read book Modeling of Integrated Circuit Components for Transient Radiation Response Prediction written by James M. Cifersky and published by . This book was released on 1969 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition experimental and predicted responses of the transistor and resistor are compared. The report also describes the development of a silicon-controlled rectifier model for predicting radiation-induced latch-up, techniques for solving the convolution integral on the SCEPTRE computer program, a model for charge completion, and an analysis if the transient response form a PN junction.

Download or read book Extreme Environment Electronics written by John D. Cressler and published by CRC Press. This book was released on 2017-12-19 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world’s foremost experts in extreme environment electronics, the book provides in-depth information on a wide array of topics. It begins by describing the extreme conditions and then delves into a description of suitable semiconductor technologies and the modeling of devices within those technologies. It also discusses reliability issues and failure mechanisms that readers need to be aware of, as well as best practices for the design of these electronics. Continuing beyond just the "paper design" of building blocks, the book rounds out coverage of the design realization process with verification techniques and chapters on electronic packaging for extreme environments. The final set of chapters describes actual chip-level designs for applications in energy and space exploration. Requiring only a basic background in electronics, the book combines theoretical and practical aspects in each self-contained chapter. Appendices supply additional background material. With its broad coverage and depth, and the expertise of the contributing authors, this is an invaluable reference for engineers, scientists, and technical managers, as well as researchers and graduate students. A hands-on resource, it explores what is required to successfully operate electronics in the most demanding conditions.