Download or read book Laser Measuring System for Large Machine Tools written by Lloyd E. Wessel and published by . This book was released on 1982 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: With development of the Laser Interferometer, it was envisioned that older existing machine tools could be up-graded by retrofitting them with laser Interferometer Measuring Systems. The Laser Interferometer provides the machine tool industry with a high accuracy length standard. The accuracy of the Interferometer is determined by the laser wave length which is known within 0.5 parts per million. This degree of accuracy is more than adequate for most machine tool measuring, calibration and inspection requirements. In conclusion, the Laser Measuring System presently available is not recommended for general implementation at this time. Results of this work indicate that the equipment and installation cost are very high and pay back would be very slow. Also, the reliability of the electronic components is in need of improvement. The system requires frequent realignment and maintenance due to it's lack of toleration to 'Shop Floor' conditions. (Author).
Download or read book Laser Measurement System for Rapid Calibration of Machine Tools written by Yuxin Li and published by . This book was released on 1997 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research 1967 written by S. A. Tobias and published by Elsevier. This book was released on 2013-10-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Tool Design and Research 1967, Part 2 provides information pertinent to the development of machine tool design. This book discusses the advances in pneumatic positioning device in the machine tool laboratories. Organized into 41 chapters, this book starts with an overview of the pneumatic digital and analogue elements used in designing the control loop. This text then explains the control system for the cylindrical grinding process developed by fluid logic elements and the diaphragm-type fluid logic element used in the control system. Other chapters consider the causes of inaccuracies on a finished machined workpiece produced by a numerically controlled machine tool. This book discusses as well the machine errors that are corrected by instrumentation, the details of this installation, and the characteristics of the instrumentation required. The final chapter deals with the basic characteristics of material flow during closed die forging. This book is a valuable resource for production and mechanical engineers.
Download or read book Machine Tool 3D Laser Measurement System written by William L. Shade and published by . This book was released on 1992 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tool Metrology written by Graham T. Smith and published by Springer. This book was released on 2016-04-06 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.
Download or read book Laser Measurement Technology written by Axel Donges and published by Springer. This book was released on 2014-10-14 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser measurement technology has evolved in the last years in a versatile and reflationary way. Today, its methods are indispensable for research and development activities as well as for production technology. Every physicist and engineer should therefore gain a working knowledge of laser measurement technology. This book closes the gap of existing textbooks. It introduces in a comprehensible presentation laser measurement technology in all its aspects. Numerous figures, graphs and tables allow for a fast access into the matter. In the first part of the book the important physical and optical basics are described being necessary to understand laser measurement technology. In the second part technically significant measuring methods are explained and application examples are presented. Target groups of this textbook are students of natural and engineering sciences as well as working physicists and engineers, who are interested to make themselves familiar with laser measurement technology and its fascinating potentials.
Download or read book MACHINE TOOL 3D LASER MEASUREMENT SYSTEM written by WILLIAM L. SHADE (JR.) and published by . This book was released on 2000 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calibration of a Machine Tool written by Hewlett-Packard Company and published by . This book was released on 1972 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mantech Project Book 1992 written by and published by DIANE Publishing. This book was released on 1993-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a summary of the projects the Air Force MANTECH Directorate has in progress or has completed within the last 10 years. Its purpose is to promote the transfer of technology which was developed through these investments into the defense industrial base.
Download or read book Machine Tool Calibration written by Hewlett-Packard Company and published by . This book was released on 1983 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by Taylor & Francis. This book was released on 2016-04-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today's high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods
Download or read book Electric Electronic and Control Engineering written by Fun Shao and published by CRC Press. This book was released on 2015-07-03 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric, Electronic and Control Engineering contains the contributions presented at the 2015 International Conference on Electric, Electronic and Control Engineering (ICEECE 2015, Phuket Island, Thailand, 5-6 March 2015). The book is divided into four main topics: - Electric and Electronic Engineering - Mechanic and Control Engineering - Informati
Download or read book Measurement and Monitoring written by Vytautas Giniotis and published by Momentum Press. This book was released on 2014-05-27 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main methods and techniques for measuring and monitoring the accuracy of geometrical parameters of precision Computer Numerically Controlled (CNC) and automated machines, including modern coordinate measuring machines (CMMs). Highlights include: • Standard methods and means of testing, together with methods newly developed and tested by the authors; • Various parameters, such as straightness, perpendicularity, flatness, pitch, yaw, and roll, as well as the principal processes for measurement of these parameters; • Lists and tables of geometrical accuracy parameters, together with diagrams of arrangements for their control and evaluation of measurement results; • Special methods and some original new devices for measurement and monitoring, information measuring systems (consisting of laser interferometers, photoelectric raster encoders or scales, etc.), and methods for the measurement and testing of circular scales, length scales, and encoders; • Methods for measuring small lengths, gaps, and distances between two surfaces; • Examples showing the suitability of mechatronic methods for high accuracy correction of machines; and • Particular attention is given to the analysis of ISO written standards of accuracy control, terms and definitions, and methods for evaluation of the measurement results during performance verification.
Download or read book Laser Metrology and Machine Performance III written by D. G. Ford and published by Computational Mechanics. This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the latest technology for assessing the performance of machine tools, coordinate measuring machines and robotics. It also details procedures involving international calibration, certification and standardization, and introduces the gear and transmission metrology section.
