Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering
Download or read book Laser Applications in Surface Modification written by Jianhua Yao and published by Springer Nature. This book was released on 2022-02-27 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the applications of laser in surface modification, such as laser cladding of Stellite alloys and metal-ceramic composites. Besides, nanomaterials including carbon nanotubes and Al2O3 nanoparticles are brought into the laser processing, to form high-temperature resistance, chemical stability, and wear- and oxidation-resistant composite coatings. The readers will get more knowledge about the basic principle and application of laser cladding and laser surface hardening technologies, and gain a deep insight into the process and characteristics of the nanomaterial-assisted laser surface enhancement. It provides references for the researchers, engineers, and students in the fields of mechanical engineering, laser processing, and material engineering.
Download or read book Laser Surface Modification of Biomaterials written by Rui Vilar and published by Woodhead Publishing. This book was released on 2016-04-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Surface Modification of Biomaterials: Techniques and Applications covers this expanding field, which has many potential applications, including biomaterials. Laser surface modification of biomaterials enables the production of hybrid materials with different functionality in the bulk as well as the thin, sub-micrometer surface layer. This book will provide readers with a comprehensive review of the technology and its applications. Chapters in Part 1 look at the techniques and considerations of laser surface modification, while Part 2 reviews laser surface modification techniques of the most important classes of biomaterials, with a final set of chapters discussing application specific laser surface modification. Offers a comprehensive review of laser surface modification techniques Presents recent developments, fundamentals, and progress in laser surface modification Reviews laser surface modification applications across a range of materials Emphasizes applications in biomaterials
Download or read book Laser Surface Treatments for Tribological Applications written by Jeyaprakash Natarajan and published by Bentham Science Publishers. This book was released on 2021-11-22 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents comprehensive information about laser surface treatments for tribological applications. Chapters of the book highlight the importance of laser technology in modifying materials to optimize the effects of friction and lubrication, by explaining a range of surface modification methods used in industries. These methods include hardening, melting, alloying, cladding and texturing. The knowledge in the book is intended to give an in-depth understanding about the role of laser technology in tribology and the manufacture of industrial materials and surfaces for special applications. Key Features: - 10 chapters on topics relevant to tribology and industrial applications of laser material processing - Comprehensively covers laser surface modification of metals and alloys - Explains a wide range of surface modification methods (hardening, melting, alloying, cladding and texturing) - Covers material and tribological characterization of surfaces - Presents information in a simple structured layout for easy reading, with introductory notes for learners - Provides references for further reading This book is an ideal reference for students and learners in courses related to engineering, manufacturing and materials science. Researchers, industrial professionals and general readers interested in laser assisted machining processes and surface modification techniques will also find the book to be an informative reference on the subject.
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications. After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components. With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Laser Precision Microfabrication written by Koji Sugioka and published by Springer. This book was released on 2010-08-13 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.
Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Laser Surface Modification and Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-09-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.
Download or read book Laser Technology written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-01-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acronym Laser is derived from Light Amplification by Stimulated Emission of Radiation. With the advent of the ruby laser in 1960, there has been tremendous research activity in developing novel, more versatile and more efficient laser sources or devices, as lasers applications are ubiquitous. Today, lasers are used in many areas of human endeavor and are routinely employed in a host of diverse fields: various branches of engineering, microelectronics, biomedical, medicine, dentistry, surgery, surface modification, to name just a few. In this book (containing 10 chapters) we have focused on application of lasers in adhesion and related areas. The topics covered include: • Topographical modification of polymers and metals by laser ablation to create superhydrophobic surfaces. • Non-ablative laser surface modification. • Laser surface modification to enhance adhesion. • Laser surface engineering of materials to modulate their wetting behavior • Laser surface modification in dentistry. • Laser polymer welding. • Laser based adhesion testing technique to measure thin film-substrate interface toughness. • Laser surface removal of hard thin ceramic coatings. • Laser removal of particles from surfaces. • Laser induced thin film debonding for micro-device fabrication applications.
Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Laser Surface Treatment of Bio Implant Materials written by Liang Hao and published by John Wiley & Sons. This book was released on 2005-11-18 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomaterials technology industry is already well established in the western world and is growing rapidly within Asian Pacific nations. It is often described as the ‘next electronics industry’, whilst the laser is described as a ‘solution looking for a problem’. This book describes the use of the laser to solve a troublesome and costly problem in a rapidly growing global industry. The authors have spent many years conducting research using laser materials processing and wettability characteristics and have perfected a technique to improve the bio-compatibility of various bone-implant materials using laser irradiation. They have made pioneering discoveries on the subject and established some generic theories and principals that will have a wide range of applications in the biomaterials field. Introduces inter-disciplinary research work covering laser materials processing and surface modification of biomaterials for enhanced compatibility. Includes highly scientific and novel research material. Serves both as a practitioner guide and a reference book. Covers an exciting and rapidly developing area of technology that is of keen interest to engineers and clinicians alike. Laser Surface Treatment of Bio-Implant Materials is rare in providing a reference source that describes specifically a mechanical engineering solution to a biotechnology problem. It serves as both a practitioner guide and a medium to high-level reference text book, and as such is a reference source for the engineer practising or looking to move into the biomaterials field, undergraduate and post graduate students and those conducting bio-related research in either academia or industry. It will prove useful to mechanical engineers, biotechnologists, biomechanical engineers, metallurgists, clinicians and even surgeons.
Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties. Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications. With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Download or read book Production Application of Laser Surface Modification written by F. D. Seaman and published by . This book was released on 1989 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Applications in Surface Science and Technology written by Horst-Günter Rubahn and published by John Wiley & Sons. This book was released on 1999-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ob zur Oberflachenanalytik oder zur Oberflachenbearbeitung - die Einsatzgebiete von Lasern in der Materialwissenschaft werden standig erweitert. Dabei ablaufende Prozesse beschranken sich gelegentlich auf einfaches Erwarmen und Schmelzen, haufig finden jedoch kompliziertere Vorgange wie die Bildung von Plasma oder kollektive Anregungen statt. Verschiedenste Techniken, die zugehorigen physikalischen Grundlagen und alle wichtigen Prozesse beschreibt dieses Buch, wobei auch neueste Themen wie ultrakurze Laserpulse oder die nichtlineare Oberflachenspektroskpoie zur Sprache kommen. (05/99)
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book Principles of Laser Materials Processing written by Elijah Kannatey-Asibu, Jr. and published by John Wiley & Sons. This book was released on 2009-04-22 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coverage of the most recent advancements and applications in laser materials processing This book provides state-of-the-art coverage of the field of laser materials processing, from fundamentals to applications to the latest research topics. The content is divided into three succinct parts: Principles of laser engineering-an introduction to the basic concepts and characteristics of lasers, design of their components, and beam delivery Engineering background&-a review of engineering concepts needed to analyze different processes: thermal analysis and fluid flow; solidification of molten metal; and residual stresses that evolve during processes Laser materials processing-a rigorous and detailed treatment of laser materials processing and its principle applications, including laser cutting and drilling, welding, surface modification, laser forming, and rapid prototyping Each chapter includes an outline, summary, and example sets to help readers reinforce their understanding of the material. This book is designed to prepare graduate students who will be entering industry; researchers interested in initiating a research program; and practicing engineers who need to stay abreast of the latest developments in this rapidly evolving field.
Download or read book Advanced Laser Process for Surface Enhancement written by Jianhua Yao and published by Springer Nature. This book was released on 2020-11-30 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two typical hybrid laser surface modification processes, i.e. electro/magnetic field aided laser process and supersonic laser deposition technology, are introduced in the book, to solve the common problems in quality control and low efficiency of the laser-only surface modification technology, high contamination and high consumption of the traditional surface modification technology. This book focuses on the principle, characteristics, special equipment, process and industrial applications of the hybrid laser surface modification processes based on the recent research results of the author’s group, and provides theoretical guidance and engineering reference for the researchers and engineers engaging in the field of surface engineering and manufacturing.