Download or read book Large scale Testing of Passive Force Behavior for Skewed Abutments with High Width height Ratios written by Katie Noel Palmer and published by . This book was released on 2013 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of seismic forces and thermal expansion on bridge performance necessitate an accurate understanding of the relationship between passive force and backwall deflection. In past case studies, skewed bridges exhibited significantly more damage than non-skewed bridges. These findings prompted studies involving numerical modeling, lab-scales tests, and large-scale tests that each showed a dramatic reduction in passive force with increased skew. Using these results, a correlation was developed between peak passive force and backwall skew angle. The majority of these tests had length to height ratios of 2.0; however, for several abutments in the field, the length to height ratio might be considerably higher than 2.0. This change in geometry could potentially affect the validity of the previously found passive force reduction correlation.
Download or read book Passive Force deflection Behavior for Abutments with MSE Confined Approach Fills written by Kyle M. Rollins and published by . This book was released on 2010 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approach fills behind bridge abutments are commonly supported by wrap-around mechanically stabilized earth (MSE) walls; however the effect of this geometry on passive force development is unknown. This report describes the first large-scale tests to evaluate passive force-deflection curves for abutments with MSE wingwalls. A test was also performed with fill extending beyond the edge of the abutment wall for comparison. The abutment wall was simulated with a pile supported cap 5.5 ft high, 11 ft wide, and 15 ft long in the direction of loading. The backfill behind the pile cap consisted of clean sand compacted to 96% of the modified Proctor maximum density. As the pile cap was loaded laterally, pressure on the MSE wall led to pull-out of the steel reinforcing grids and the MSE wall panels moved outward about 2% of the wall height when the ultimate passive force developed. Despite pullout, the passive force per effective width was 28 kips/ft for the pile cap with MSE wingwalls compared to 22.5 kips/ft for the cap without wingwalls. Nevertheless, the passive force with the MSE wingwalls was still only 76% of the resistance provided by the cap with fill extending beyond the edges. The pile cap with MSE walls required greater movement to reach the ultimate passive force (deflection of 4.2% of wall height vs. 3%). The Caltrans method provided good agreement with the measured passive resistance while the log spiral method required the use of a higher plane strain friction angle to provide reasonable agreement.
Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Design and Construction of Bridge Approaches written by Harvey E. Wahls and published by Transportation Research Board. This book was released on 1990 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes case histories of the Dumbarton Bridge (San Francisco Bay, Calif.), the Rainier Avenue Embankment (Seattle, Wash.) and the Gallows Road Grade Separation (Fairfax, Va.)
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book Integrated Probabilistic Performance based Evaluation of Benchmark Reinforced Concrete Bridges written by Kevin Rory Mackie and published by . This book was released on 2008 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expansion Joints in Buildings written by National Research Council and published by National Academies Press. This book was released on 1974-02-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
Download or read book Masonry Arch Bridges written by John Page and published by Bernan Press(PA). This book was released on 1993 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry arch bridges are an important part of the British road and rail network. There are for instance, about 40,000 road bridges, about 40% of Britain's total bridge stock. The amount of traffic they are now called on to carry has increased enormously since they were built, as has the weight of some of that traffic. Although these bridges have been in existence for thousands of years, research on their structural behaviour is still being carried out and new analytical techniques are being developed.
Download or read book Performance based Seismic Bridge Design written by M. Lee Marsh and published by Transportation Research Board. This book was released on 2013 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 440, Performance-Based Seismic Bridge Design (PBSD) summarizes the current state of knowledge and practice for PBSD. PBSD is the process that links decision making for facility design with seismic input, facility response, and potential facility damage. The goal of PBSD is to provide decision makers and stakeholders with data that will enable them to allocate resources for construction based on levels of desired seismic performance"--Publisher's description.
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Seismic Performance and Simulation of Pile Foundations in Liquefied and Laterally Spreading Ground written by Ross W. Boulanger and published by . This book was released on 2006 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a workshop on Seismic Performance and Simulation of Pile Foundations in Liquefied and Laterally Spreading Ground, held in Davis, California, March 16-18, 2005. Sponsored by the Pacific Earthquake Engineering Research Center; University of California at Berkeley; Center for Urban Earthquake Engineering; Tokyo Institute of Technology; Geo-Institute of ASCE. This collection contains 25 papers that discuss physical measurements and observations from earthquake case histories, field tests in blast-liquefied ground, dynamic centrifuge model studies, and large-scale shaking table studies. Papers contain recent findings on fundamental soil-pile interaction mechanisms, numerical analysis methods, and reviews and evaluations of existing and emerging design methodologies. This proceeding provides comprehensive coverage of a major issue in earthquake engineering practice and hazard mitigation efforts.
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Engineering and Design Structural Deformation Surveying Engineer Manual Em 1110 2 1009 written by and published by . This book was released on 2002-06-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.
